Casio IT-800 User Manual
Handheld Terminal
User’s Guide
E
Series
Be sure to read “Safety
Precautions” inside this
guide before trying to use
your Handheld Terminal.
Contents
Safety Precautions ........................................................................................E-3
Operating Precautions ..................................................................................E-8
Important ........................................................................................................E-8
After Service ........................................................................................................ E-8
Regulatory Information .................................................................................E-9
Checking in the Box ....................................................................................E-13
Handheld Terminal System Confi guration ................................................E-14
General Guide ...............................................................................................E-16
Loading and Removing the Battery Pack ..................................................E-19
Loading ..............................................................................................................E-20
Removing ........................................................................................................... E-21
Charging the Battery Pack .........................................................................E-22
USB Cradle/Ethernet Cradle/Cradle-type Battery Charger ............................... E-22
Car Mounted-type Battery Charger .................................................................... E-22
Dual Battery Charger ......................................................................................... E-23
AC Adaptor ........................................................................................................E-23
Handling the Hand Belt ...............................................................................E-24
To remove the hand belt ..................................................................................... E-24
To attach the hand belt ...................................................................................... E-24
Connecting the Stylus String .......................................................................E-25
Attaching the Neck Strap ............................................................................E-26
To attach the neck strap ...................................................................................... E-26
Confi guring Handheld Terminal Settings ..................................................E-27
Calibrating Touch Screen Alignment ................................................................. E-27
Adjusting Display Brightness ............................................................................E-28
Display Auto Dimmer ........................................................................................E-28
Using the Laser Scanner (Laser Models) ..................................................E-29
Using the C-MOS Imager (Imager Models) ................................................E-30
Adjusting the Laser Light Emission Width ................................................E-31
Handling the NFC ........................................................................................E-33
Performing Communications .....................................................................E-34
IR Communication ............................................................................................. E-34
Bluetooth
GSM/W-CDMA Communication ......................................................................E-36
GPS ....................................................................................................................E-36
®
Communication ...............................................................................E-35
E-1
Handling microSD Cards ............................................................................E-37
Installing.............................................................................................................E-37
Removing ........................................................................................................... E-38
Handling SIM Cards .....................................................................................E-39
Installing.............................................................................................................E-39
Removing ........................................................................................................... E-40
Handling SD Memory Cards .......................................................................E-41
Installing.............................................................................................................E-41
Removing ........................................................................................................... E-41
Resetting the Handheld Terminal ...............................................................E-42
Performing a Full Reset (Initialization) ............................................................. E-42
Warning Label ..............................................................................................E-44
IT-800 Specifi cations ...................................................................................E-45
Using the USB Cradle (HA-H60IO) ..............................................................E-49
General Guide ........................................................................................................49
Connecting the USB Cradle Power Supply ...........................................................51
Specifi cations .........................................................................................................54
Using the Ethernet Cradle (HA-H62IO) ....................................................... E-55
General Guide ........................................................................................................55
Connecting the Ethernet Cradle Power Supply ......................................................57
Specifi cations .........................................................................................................59
Using the Cradle-type Battery Charger (HA-H30CHG) .............................E-60
General Guide ........................................................................................................60
Connecting the Cradle-type Battery Charger Power Supply .................................61
Specifi cations .........................................................................................................62
Using the Car Mounted-type Battery Charger (HA-H35CHG) ..................E-63
General Guide ........................................................................................................63
Specifi cations .........................................................................................................64
Using the Dual Battery Charger (HA-D32DCHG) .......................................E-65
General Guide ........................................................................................................65
Charging a Battery Pack.........................................................................................67
Connecting Multiple Dual Battery Chargers..........................................................68
Specifi cations .........................................................................................................69
Using the AC Adaptor (AD-S15050B) ..........................................................E-70
Using Rechargeable Battery Packs ............................................................E-71
Battery Pack Specifi cations ....................................................................................71
E-2
Large-capacity Battery Pack Specifi cations ...........................................................71
Safety Precautions
Congratulations upon your selection of this CASIO product. Be sure to read the
following Safety Precautions before trying to use it for the fi rst time.
Your neglect or avoidance of the warning and caution statements in the
subsequent pages causes the danger of fi re, electric shock, malfunction and
damage on the goods as well as personal injury.
Markings and Symbols
The following are the meanings of the markings and symbols used in these Safety
Precautions.
Danger
Warning
Caution
A diagonal line indicates something you should not do. The symbol shown
•
here indicates you should not try to take the unit apart.
A black circle indicates something you should do. The symbol shown here
•
indicates you should unplug the unit from the wall outlet.
This symbol indicates information that, if ignored or applied
incorrectly, creates the danger of death or serious personal injury.
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of death or serious personal
injury.
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of personal injury or property
damage.
Disassembly and Modifi cation
Never try to disassemble or modify the Handheld Terminal and its options
•
including battery pack and battery in any way.
Abnormal Conditions
Should the Handheld Terminal and/or its options including battery pack and
•
battery become hot or start to emit smoke or a strange odor, immediately turn
off the power and contact your dealer or distributor whom you purchased the
product from, or an authorized CASIO service provider.
Warning
E-3
Warning
Dust and Moisture
Though the Handheld Terminal is dust and water splash resistant, its options
•
including the battery pack are not. Keep loose metal objects and containers
fi lled with liquid away from your Handheld Terminal and the options. Also,
never handle the Handheld Terminal and the options while your hands are
wet.
Laser Light
The laser scanner models (model dependant) with the integrated laser
•
scanning module scan bar codes using laser light. Never look directly into
the laser light or shine the laser light into the eyes.
Warning
Interference with the Operation of Other Equipment
(Using Wireless Data Communication)
Keep your Handheld Terminal at least 22 centimeters (811/16") away from
•
anyone wearing a pacemaker. Radio waves emitted by the Handheld
Terminal can affect the operation of a pacemaker.
Before the use in aircraft, be sure to consult with cabin crew for interference
•
the Handheld Terminal emits.
Before the use in medical facility, be sure to consult with the facility
•
management or the manufacture of a specifi c medical equipment that the
Handheld Terminal may interfere with.
Do not use the Handheld Terminal nearby gas pump or chemical tank or any
•
other places fl ammable or explosive.
To comply with the relevant European RF exposure compliance
•
requirements, a separation distance of at least 3.8cm in wireless operation
must be maintained between the terminal and all persons around. This
terminal must not be co-located or operating in conjunction with other
transmitter.
E-4
Foreign Objects
Take care to ensure that metals or combustible objects are not inserted into
•
the openings of the Handheld Terminal or its options, and not to allow
moisture to get inside of them.
Location
Install the cradle properly on a fl at and stable surface so that it cannot fall
•
down onto fl oor.
LCD Screen
Never apply strong pressure to the screen or subject it to strong impact.
•
Doing so can crack the LCD Screen.
Avoiding Traffi c Accidents
Never use your Car Mounted-type Battery Charger while operating a motor
•
vehicle. Park your vehicle in a safe place before performing any operation.
Never locate the Car Mounted-type Battery Charger where it might interfere
•
with proper operation of the vehicle.
Locate connecting cables as instructed by the manual, avoiding locations
•
that can interfere with driving operations.
Car Battery Power
Should the Car Power Cable become damaged, replace it immediately with
•
a new Car Power Cable when using the Car Mounted-type Battery Charger.
Caution
Warning
Installing in Vehicle
To save your vehicle’s battery from running down, be sure that the Car
•
Power Cable should be unplugged from the cigarette lighter socket when
you do not use the Car Mounted-type Battery Charger and that the use of
the battery charger should be avoid while the vehicle’s engine is turned off.
Do not handle the Car Power Cable with wet hands.
•
Install the Car Mounted-type Battery Charger at location in a vehicle where
•
strong vibration, unstable, excessive of humidity and dust, and under direct
sunlight can be avoid. Also, avoid the area where the air bag infl ates or any
other area where your safe driving is blocked.
Do not leave the Handheld Terminal in vehicle for a long period of time.
•
Caution
E-5
Optional Lithium-ion Battery Pack
Danger
Never use the Handheld Terminal and its option including the battery pack
•
and battery next to open fl ame, near a stove, or any other area exposed to
high heat, or leave them for a long period of time in a vehicle parked in
direct sunlight.
Never use the battery pack with any device other than the Handheld
•
Terminal.
Never dispose of the battery pack by incinerating it or otherwise expose it
•
to heat.
Never transport or store the battery pack together with metal objects that
•
may result in shorting positive (+) and negative (–) terminals of the battery
pack. Be sure to place the battery pack in its case whenever transporting or
storing it.
Never throw the battery pack or otherwise subject it to strong impact.
•
Never pierce the battery pack with nails, hit it with a hammer, or step on it.
•
Use only the specifi ed battery charger to charge the battery pack.
•
Warning
Never place the battery pack in a microwave oven or any other high-voltage
•
device.
If the amount of time period the battery pack can serve becomes
•
considerably short even after it has been fully charged for the specifi ed time
period, stop using it.
Should the battery pack start to leak or emit a strange odor, immediately
•
move it away from any fl ame nearby. Leaking battery fl uid is combustible.
Should fl uid from the battery pack accidentally get into your eyes or on the
•
skin, do not rub it. Immediately rinse it off with clean tap water and then
consult a physician.
E-6
Caution
Replace only with the same type of battery pack recommended by CASIO.
•
Dispose of used battery packs according to the local regulation.
Keep the battery pack out of the reach of small children.
•
Power Supply / AC Adaptor
Do not use the Handheld Terminal at a voltage other than the specifi ed
•
voltage. Also, do not connect the Handheld Terminal to a multi-plug power
strip.
Never modify, sharply bend, twist, or pull on the power cord.
•
Never use a detergent to clean AC adaptor and its power cable, especially
•
on the plug and the jack.
When using the battery chargers and the cradles, be sure to use the
•
respective AC adaptors.
Never pull on the power cord when unplugging it. Always hold the plug
•
when unplugging it from the wall outlet.
Never touch the plug while your hands are wet.
•
Be sure to unplug the power cord from the wall outlet before cleaning the
•
battery chargers and the cradles.
Unplug the power cord from the wall outlet whenever leaving the battery
•
chargers and the cradles unattended for a long period.
The housing of the AC adaptor can become warm during normal use.
•
At least once a year, unplug the AC adaptor from the wall outlet and clean
•
any dust that builds up between the prongs of the plug.
Dust built up between the prongs can lead to the danger of fi re.
Warning
Caution
Backup of All Important Data
Note that CASIO Computer Co., Ltd. shall not be held liable to you or any
•
third party for any damages or loss caused by deletion or corruption of data
due to use of the Handheld Terminal, malfunction or repair of the Handheld
Terminal or its peripherals, or due to the batteries going dead.
The Handheld Terminal employs electronic memory to store data, which
•
means that memory contents can be corrupted or deleted if power is
interrupted due to the batteries going dead or incorrect battery replacement
procedures. Data cannot be recovered once it is lost or corrupted. Be sure
to make backup of all important data. One way to do this is to use the
separately sold cradles to transfer data to a computer.
Caution
E-7
Operating Precautions
Your Handheld Terminal and its options are precision. Improper operation or rough
handling can cause problems with data storage and other problems. Note and observe
the following precautions to ensure proper operation.
Do not leave dead battery pack in the Handheld Terminal for a long period.
•
Dead battery pack can leak, leading to malfunction and damage to the Handheld
Terminal.
Stop or avoid using the Handheld Terminal and its options in areas and
•
conditions subject to the following.
— Large amounts of static electricity
— Extreme heat or cold or humidity
— Sudden temperature change
— Large amount of dust
— After large amount of rain or water falls on the Handheld Terminal
— Pressing the screen or keys with excessive force when using in the rain
Dead Pixels
•
The LCD panel employed in this product uses high precision and substantial number
of components which commonly cause a small number of the pixels not to light or
to remain lit all the time. This is due to the characteristics of LCD panel yield in
accuracy over 99.99% and permissible.
802.11a Restrictions (IT-800A-35):
•
— This product is for indoor use only when using channels 36, 40, 44, 48, 52, 56, 60,
or 64 (5150-5350 MHz).
— To ensure compliance with local regulations, be sure to select the country in which
the access point is installed.
Important
This guide does not include any information about programming and download
•
procedures. See the applicable separate documentation for information about the
procedures.
After Service
Should this product ever malfunction, contact your original retailer providing
•
information about the product name, the date you purchased it, and details about the
problem.
This mark applies to EU countries and Turkey only.
E-8
Regulatory Information
The USA and Canada
The CASIO IT-800 models are designed, tested and found to meet the relevant regulatory
standards described below.
USA
IT-800E
FCC Part 15 Subpart B
FCC Part 15 Subpart C
SAR ET DOCKET 93-62 and OET BULLETIN
CFR 21 Subpart 1000 (FDA)
UL 60950-1
HA-H60IO/HA-H62IO/HA-H30CHG
FCC Part 15 Subpart B
UL 60950-1
Canada
IT-800E
RSS-GEN
RSS-210
RSS-102
RSS-310
ICES-003
cUL 60950-1
HA-H60IO/HA-H62IO/HA-H30CHG
ICES-003
cUL 60950-1
E-9
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not
applicable to other areas).
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
FCC WARNING
Changes or modifi cations not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC
emission limits.
Caution Exposure to radio frequency radiation (below is for portable device)
To comply with FCC RF exposure compliance requirements, this device must not be co-located or
operating in conjunction with any other antenna or transmitter.
NOTICE
Model Number: HA-H60IO, HA-H62IO
Trade Name: CASIO
Responsible party: Industrial Handheld Division
Casio America, Inc.
Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Declaration of Conformity
For Users in Canada
These Class B digital apparatuses comply with Canadian ICES-003.
Cet appareil numériqué de la classes B est conformé à la norme NMB-003 du Canada.
These devices comply with RSS 210 of Industry Canada (IC).
Operation is subject to the following two conditions:
(1) These devices may not cause interference, and
(2) These devices must accept any interference, including interference that may cause undesired operation of this device.
E-10
L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
0984
(1) il ne doit pas produire de brouillage et
(2) I’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
Exposure to radio frequency radiation
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does
not emit RF fi eld in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's website at
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/99ehd-dhm237/index_e.html
Europe
Products are for distribution within
all member states of the EU.
0984
France limited to 2446.5-2483.5 MHz Indoor use.
Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use.
Optional models HA-H60IO, HA-H62IO, HA-H30CHG, HA-H35CHG, HA-D32DCHG, HAD20BAT and HA-D21LBAT are in conformity with the Council Directive 2004/108/EC.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Representative within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
E-11
DECLARATION OF CONFORMITY
We, the under signed, CASIO Europe GmbH, hereby declare that the following types of the
product:
Product: Handheld Terminal
Type: IT-800R, IT-800RG
Brand: CASIO
are in conformity with all the provisions of the EC directive bellow meeting with the
relevant standards:
Council Directive: 1999/5/EC (R&TTE Directive):
Standards applied to all the types:
EN 300 328 v1.7.1 (2006-10) EN 60950-1: 2006
EN 300 330-2 v1.3.1 (2006-04) EN 50364: 2001
EN 301 489-3 v1.4.1 EN 62311: 2008
EN 301 489-17 v2.1.1
Standards applied to IT-800RG only:
EN 301 511 v9.0.2 EN 301 489-1 v1.8.1
EN 301 908-1 v3.2.1 EN 301 489-7 v1.3.1
EN 301 908-2 v3.2.1 EN 301 489-24 v1.4.1
EN 50360: 2001
These types of the product are fully compliant with all the essential requirements of the
directive and the standards that are assessed by the following Notifi ed Body.
Compliance Certifi cation Services (NB Number; 0984).
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Representative within the European Union:
CASIO Europe GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
E-12
Checking in the Box
Please check the contents of the box before using the Handheld Terminal for the fi rst
time.
Open the box and make sure that all the items shown here are included.
Handheld Terminal
The hand belt
is attached on
the back of the
terminal. Set the
hand belt in proper
length by adjusting
the hook-loop
fastener prior to
using the terminal.
Neck Strap
Stylus
The stylus can be attached
to the hand belt.
The stylus string can be
attached to the stylus
and hand belt.
Large-capacity Battery
Pack Cover
User's Guide (this manual)
E-13
Handheld Terminal System Confi guration
Options
The illustration shows the
USB Cradle (HA-H60IO).
The car power cable accompanies
to HA-H35CHG.
IT-800 Series
IT-800 Series
IT-800EC-05
IT-800EC-05
IT-800EC-35
IT-800EC-35
These models are
These models are
available in the
available in the
USA and Canada
USA and Canada
only.
only.
USB Cradle
HA-H60IO
Ethernet Cradle
HA-H62IO
Cradle-type Battery Charger
HA-H30CHG
Car Mounted-type Battery Charger
HA-H35CHG
For the latest options list, refer to the ON-LINE manual available at
http://world.casio.com/system/pa/UsersGuide/sup85_e.html
E-14
Options
HA-D20BAT/HA-D20BAT-A
(Battery Pack)
For WWAN models*, be sure to use either HA-D20BAT-A or
HA-D21LBAT-A battery pack.
HA-D21LBAT/HA-D21LBAT-A
(Large-capacity Battery Pack)
Dual Battery Charger Battery Pack
HA-D32DCHG
AC Adaptor for USB Cradle/
Ethernet Cradle/
Dual Battery Charger
AD-S42120C-N5
AD-S42120B-N
**
Power Cord for Europe
Power Cord for North America
Power Cord for Taiwan
Power Cord for Korea
Power Cord for Australia
Cable
DT-380USB
AC Adaptor for IT-800/
Cradle-type Battery Charger
AD-S15050B-N
AC-CORD-EU
AC-CORD-US
AC-CORD-TW
AC-CORD-KR
AC-CORD-AU
Screen Protect Sheet
HA-C90PS5B
* WWAN models:
IT-800RGC-05/RGC-15/RGC-35
** The AD-S42120B-N is not sold in the EU or in EFTA member states.
E-15
General Guide
25
17
18
20
19
IT-800R-15
IT-800RC-15
19
IT-800RGC-15
Left Right
25
17
18
77
20
13
15
Back
33 34
To p
19
IT-800R-35
IT-800A-35
IT-800EC-35
IT-800RC-35
19
IT-800RGC-35
Front
123 4
12
23
24
26
14
21
5
6
8
9
10
11
Bottom
19
IT-800R-05
IT-800EC-05
19
IT-800RGC-05
25
16
22
25
16
E-16
32
31
30
29
27
28
1 Receiver Outputs voice sound.
2 Indicator 1 Orange: Charging
Green: Charging complete
Red: Battery pack error or the surrounding temperature is out of
the charging temperature range.
3 Indicator 2 Flashes blue when operating via Bluetooth or orange when
operating via W-LAN, GPS or W-WAN. Lights red when there
is a bar code scanning error and lights green when a bar code
scans successfully.
Lights red when the alarm function is activated.
4 Power Key Turns the power on and off.
5 Screen* The screen displays texts, operations, indicators and so forth. In
addition, operations can be performed and data can be input on
the screen using stylus. During the NFC operation, apply a card
close to the screen so that the card can be accessed.
6 Center Trigger Key Used to perform bar code reading. Can be assigned an arbitrary
Center Key
(for IT-800R-05/EC-05/
RGC-05)
7 Function Keys Used when starting a pre-registered application.
8 Enter Key Press when fi nishing entering numerical values or when moving
9 Mode Key The key switches the character input mode, either characters in
10 Fn Key Used to make various settings in combination with the function
11 CLR Key Used to clear one letter to the left of the cursor.
12 Numeric Keys Used to enter numeric values and decimal points.
13 Cursor Key Perform the same functions as the up and down arrow keys on a
14 Microphone Used for audio input (including voice).
15 Speaker Generates audio and buzzer tones.
16 R Trigger Key Used to perform bar code reading.
R Enter Key
(for IT-800R-05/EC-05/
RGC-05)
17 L Trigger Key Used to perform bar code reading.
Up/Down Key
(for IT-800R-05/EC-05/
RGC-05)
function.
to the next step.
lowercase letter or characters in uppercase letter.
keys or numeric keys or when starting a pre-registered
application.
PC keyboard.
E-17
18 DC Jack The dedicated optional AC adaptor is connected to this jack.
19
Barcode Reader
SD Card Slot
(for IT-800R-05/EC-05/
RGC-05)
20 IR Port Used for communication with another Handheld Terminal.
21 Power/Signal
Terminals
22 Strap Holes Used to attach neck strap and hand belt.
23 Camera Lens
(Camera models)
24 LED
(Camera models)
25 Car Mounted-type
Battery Charger
Mount Holes
26 Reset Switch Used to reset the Handheld Terminal.
microSD Card Slot
27
(for IT-800R-15/RC-15/
RGC-15/R-35/A-35/
RC-35/RGC-35/EC-05)
28 Battery Pack Cover Used to cover the battery compartment that holds the battery
Cradle Mount Holes
29
30 SIM Card Slot
(for IT-800RGC-05/
RGC-15/RGC-35)
31 Battery Pack Cover
Lock Switches
32 Extension Port Provided for future extension.
33 Stylus It is used to operate the terminal or to input data.
34 Hand Belt It is used to hold the terminal or to carry it.
Laser light or LED light is emitted from this window that reads
bar codes.
SD card slot.
Used to receive power provided by the USB Cradle or Ethernet
Cradle. Also used for data communication.
Takes photos.
Used for taking photos.
These holes hold the terminal seating in the optional car
mounted-type battery charger.
microSD card slot. (Remove the battery pack to load a card.)
pack inside.
These holes hold the terminal seating in the optional cradle or
in the cradle-type battery charger.
SIM card slot. Remove the battery pack to load and unlaod SIM
card.
Used to lock the battery cover and to release.
* Antenna of the NFC is laid underneath of the screen frame for communication with card.
E-18
Loading and Removing the Battery Pack
Your Handheld Terminal uses two types of battery: a battery pack and a memory
backup battery.
The battery pack is used to power normal operations and to store data, while the
memory backup battery provides the power required to maintain memory contents
when the battery pack power is unable to supply power for some reason.
You can choose either battery pack (HA-D20BAT, HA-D20BAT-A) or large-capacity
battery pack (HA-D21LBAT, HA-D21LBAT-A) for operating power.
For WWAN models, be sure to use either HA-D20BAT-A or HA-D21LBAT-A battery pack.
The backup battery is installed inside of the Handheld Terminal.
This guide uses the following terms to refer to the batteries.
Battery Pack:
Backup Battery: Built-in battery for memory backup
When the battery pack power goes low, immediately charge it or replace it with a
charged battery pack.
You can use the Dual Battery Charger, the Cradle-type Battery Charger, the USB Cradle,
the Ethernet Cradle, the Car Mounted-type Battery Charger, or the AC adaptor to charge
a battery pack installed in the terminal. See the relevant sections in this guide for the
respective options about how to use.
Important!
Always keep backup of all important data!
The battery pack powers normal operation and also provides power required to
•
maintain memory contents, while the backup battery provides backup power to
maintain memory contents. Because of this, you should not remove the battery
pack if the backup battery is dead. Removing the battery pack while the backup
battery is dead causes data in the memory to be corrupted or lost. Note that
once data is lost it cannot be recovered. Always keep backup of all important
data.
The charge of a battery pack when you purchase it may be depleted due to
•
testing at the factory or natural discharge during shipment and storage. Be sure
to charge the battery pack before you use it.
The life of a battery pack is limited, and charging a battery pack causes it to
•
gradually lose its ability to maintain the charge. If your battery pack seems to
require charging very frequently, it probably means it is time to purchase a new one.
If a battery pack is used past the end of its service life, it may swell up in size. In
•
such a case, replace the battery pack with a new one.
If the backup battery is fully charged, it will maintain the contents of the
•
terminal's memory (RAM) for approximately 10 minutes when the main battery
pack is removed.
It takes 4 days with the main battery pack installed in the terminal for the
•
backup battery to be charged fully.
Rechargeable battery pack (HA-D20BAT, HA-D20BAT-A, HA-D21LBAT
or HA-D21LBAT-A) for normal operations and data storage
E-19
Loading
1. Turn the terminal upside down and loosen the hand belt.
'
'
4
(
%
1
.
2. Slide the left and right lock switches for the battery pack cover to the “FREE”
position, and then remove the battery pack cover.
%
1
.
'
'
4
(
'
'
4
(
%
1
.
3. Load a battery pack (HA-D20BAT, HA-D20BAT-A) or large-capacity battery pack
(HA-D21LBAT, HA-D21LBAT-A). Take care that the battery pack is oriented
correctly when you load it. In addition, load the battery pack while making sure that
the end of the battery pack removal tape is protruding above the battery pack.
%
1
.
'
'
4
(
'
'
4
(
%
1
.
4. Put back the battery pack cover in the compartment as instructed by the arrows,
and
in the illustration and then return the battery pack cover lock switches to the
“LOCK” position (
).
E-20
Removing
1. Make sure that the Handheld Terminal is turned off.
If the power is on, press the power key to turn it off.
2. Turn the terminal upside down and loosen the hand belt.
3. Refer to “Loading” on the previous page and remove the battery pack cover.
4. Remove the battery pack by pulling up the removal tape as shown in the illustration.
Loading the large-capacity battery pack into the Handheld Terminal
After loading the large-capacity battery pack, you need to use the special large-capacity
battery pack cover in place of the standard battery pack cover.
“Loading and Removing” of the large-capacity battery pack cover is the same as those
for the standard battery pack cover.
Important!
When removing the battery pack, make sure you do not leave the Handheld
•
Terminal without a battery pack for more than about 10 minutes. Doing so can
cause data in the memory to be deleted.
When removing the battery pack, be sure you carefully follow the proper
•
procedure as explained in this guide.
Never try to use other type of battery than the ones that are specifi ed for this
•
product.
When removing the battery pack, pull the removal tape straight up and remove
•
the battery pack. Removing with excessive force can damage the battery pack.
Before starting to use the Handheld Terminal, ensure that the battery pack cover
•
is properly closed. If not, the power is not turned on or is turned off abruptly
while it is in use.
E-21
Loading...