Casio 10M30BR, IT-10M20 User Manual

IT-10 Series

Hardware Manual

(Version 1.00)

CASIO Computer Co., Ltd.

March 2005

Table of Contents

Preface 5

Chapter 1 Product Overview 6

1.1 Features 6

1.2 Available Models And Options 7

1.2.1 Options And Interfaces 8

1.3 General Guide 9

1.3.1 IT-10 9

1.3.2 HA-C60IO (Basic Cradle) 11

1.3.3 HA-C61IO (Bridge Satellite Cradle) 12

1.3.4 HA-C32DCHG (Dual Battery Charger) 14

1.3.5 HA-C21BAT (Battery Pack) 15

Chapter 2 Hardware Specifications 16

2.1 IT-10 16

2.2 HA-C60IO/HA-C61IO 21

2.3 DIP Switch Setting (For HA-C61IO) 23

2.4 Status Indication With LEDs 24

2.5 HA-C32DCHG 25

2.6 HA-C21BAT 26 Chapter 3 Product Identification And Reference Numbers 27 Chapter 4 Quality References 28

4.1 Environment Performances 28

4.1.1 IT-10 28

4.1.2 HA-C60IO 29

4.1.3 HA-C61IO 29

4.1.4 HA-C32DCHG 30

4.1.5 HA-C21BAT 30

4.2 Electric Durability 31

4.2.1 IT-10 31

4.2.2 HA-C60IO/HA-C61IO 31

4.2.3 HA-C32DCHG 31

4.2.4 HA-C21BAT 32

4.3 Physical Durability 33

4.3.1 IT-10 33

4.3.2 HA-C60IO/HA-C61IO 33

4.3.3 HA-C32DCHG 33

4.3.4 HA-C21BAT 34

4.4 Reliability 35

4.4.1 IT-10 35

4.4.2 HA-C60IO/HA-C61IO 36

4.4.3 HA-C32DCHG 36

4.5 Compliance 37

4.5.1 IT-10 37

4.5.2 HA-C60IO/HA-C61IO 37

4.5.3 AD-S42120AE/AD-S15050AE 37

4.5.4 HA-C21BAT 37 Chapter 5 Cable Specifications 38

5.1 For Chain Connection And Short Length 38

5.2 For Chain Connection And Long Length 39 Chapter 6 Precautions 40

6.1 Handling Precautions 40

6.2 Safety 41

6.2.1 Battery Pack 41

6.2.2 General 42

Editorial Record 4

CASIO is a registered trademark of CASIO Computer Co., Ltd. in Japan. Other product names or company names in this reference manual are either trademarks or registered trademarks of their respective owners.

No part of this document may be produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd. in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.

Editorial Record

Manual Ve r s i o n

no.

1.00 March 2005 Original

Date edited Page Content

Preface

The IT-10 is a new rugged PDA designed and built to be used for vertical applications (business specific applications) in severe business environment. The terminal is water-splash proof, dust proof and can withstand the inevitable rough handling that any vertical market device will suffer.

This reference manual will explain you in detail about the specifications of hardware, reliability, environment, compliance and etc. for the series including models, IT-10M20 and IT-10M30BR, and the dedicated options as well.

1. Product Overview

1.1 Features

Hardware and software features at a glance

• Uses Windows Mobile 2003 Second Edition Software for Pocket PC as the operating system.

• Withstand a drop from 1 meter, and IP54 level for dust and water-splash resistance (compliant with

IEC60529 standard).

• Large 3.7-inch transflective VGA LCD (landscape or portrait mode is possible)

• Standard large capacity battery pack for up to 27 hours of continuous use

• CompactFlash and SDIO card slots for flexible system expansion in future possible.

• Auto-recovery tool to automatically back up and restore user data in case of accidental data corruption

• Bluetooth and Wireless LAN (compliant with IEEE802.11b) are integrated as standard for wireless LAN

configuration (IT-10M30BR only).

1.2 Available Models And Options

Table 1.1 Available models

Model RAM IEEE802.11b Bluetooth Remark

IT-10M20 64 MB No No

IT-10M30BR 128 MB Yes Yes

Table 1.2 Options

Option Product Model no. Remark

Bridge Satellite Cradle HA-C61IO USB/RS-232C/RS-422 Cradle

Basic Cradle HA-C60IO USB/RS-232C Battery Battery Pack HA-C21BAT 2,300 mAh, 3.7V Battery Charger Dual Battery Charger HA-C32DCHG 4 hours to charge 2 battery

packs. AC Adaptor AD-S42120AE DC output 12V AC adaptor AC Adaptor AD-S15050AE DC output 5V, 3A

Screen Protect Sheet Screen Protect Sheet HA-C90PS5 5 pcs in one pack Communication Card Cover Cable

The accessories in the table below are included in each individual carton box of IT-10M20.

Table 1.3 Accessory

Product Q’ty Remark Battery Pack 1 HA-C21BAT Stylus 1 Attached to the terminal. AC Adaptor 1 AD-S15050AE (with European and USA power cords) CD-ROM 1 Pocket PC 2003 Premium License CD User’s Guide 1 English and Chinese

The IT-10M30BR model is as above except that the AD-S15050AE is supplied separately and is NOT supplied in the box.

Communication Card Cover RS-232C cable DT-887AXA Length; 1.5 m, 9-pin male USB cable DT-380USB Length; 2.0 m RS-422 cable DT-888RSC Length; 1.0 m

HA-C92TCV

1.2.1 Options And Interfaces

IT-10

IrDA Port

(IrDA 1.3)

Power Supply

Terminals

（Built-in Charger）

SD Card Slot

CF Card Slot

Serial Port

IrDA Product

(Recommended

option）*

Bridge Satellite Cradle

HA-C61IO

SD card

(Recommended

option）＊

CF Card

(Recommended

option）＊

Basic Cradle

HA-C60IO

USB

RS-232C

RS-422

AC Adaptor

AD-S42120AE

Comm. Card Cover

HA-C92TCV

USB

RS-232C

Bridge satellite Cradle

HA-C61IO

AC Adaptor

AD-S42120AE

AC Adaptor

AD-S15050AE

DC Jack

Headphone Jack

WLAN

（IEEE802.11b）

Bluetooth Module

(Ver.1.2 Class2)

Battery Pack

HA-C21BAT

Display Block

AC Adaptor

AD-S15050AE

Headphone

Access-Point

（Recommended

option）＊

Bluetooth Product

（Recommended

option）＊

Battery Pack HA-C21BAT

Dual battery

Charger

HA-C32DCHG

Screen Protect Sheet

HA-C90PS5

Battery Pack HA-C21BAT

Dual Battery

Charger

HA-C32DCHG

AC Adaptor

AD-S42120AE

Fig. 1.2

1.3 General Guide

1.3.1 IT-10

External Views

Fig. 1.3

Fig. 1.2

Refer to Table 1.4 for names of each part and its description.

Table 1.4 Names of parts

No. Part Name Description

1 Strap hole A commercially available strap can be attached here. 2 Headphone jack A commercially available earphones or headphones (with 3.5 mm in

diameter) can be attached here. Remove the rubber cover to use it.

3 Reset switch This switch resets the terminal, similar to turning off and on the power

switch. Reset the terminal when some abnormality occurs, such as if the buttons or tap operations stop working.

4 Action button This button operates as the Enter key on a computer. Also, it has several

functions when the 5way cursor button is pressed at the same time. 5 UP/DOWN button This button moves the cursor and similar items up and down on the screen. 6 Battery pack cover lock

switch

Be sure to keep the lock switches locked. Locking the switches prevents the

battery pack from falling out. 7 Battery pack cover This is the cover for the battery pack. 8 IrDA port This communication port is used data exchange via the IrDA interface. 9 Eject button This button ejects a CF card (CompactFlash card) installed in the slot.

10 SD card slot Either SD card or multimedia card can be inserted in this slot. 11 CF card slot CF card (CompactFlash card) can be inserted in this slot. 12 Indicator lamp (left) When the AC adaptor is connected to the terminal or the terminal is mounted

on the Basic Cradle, the lamp turns on in orange indicating the battery pack

is being charged, or in green indicating the battery pack is fully charged.

13 Indicator lamp (right) The lamp blinks in green when CF card or SD card is being accessed. It also

blinks in red for the alarm.

14 Power switch Press this switch to turn on the power or off. Once the power is turned on,

wait for 10 seconds or more to turn off the power.

15 LCD screen The LCD screen displays information and stylus is used to enter information

or operate on the screen.

16 Microphone Direct voice sound here when recording on the Pocket Word or Memo

screen.

17 Program buttons Pushing one of the program buttons starts the program assigned to that

button. The four default settings are, from the upper left, Menu, Calendar,

Contents, and Inbox.

18 5way cursor button This button moves the cursor and similar items up, down, left and right on

the screen. Pressing the center of the button straight down performs the same

operation as the Enter key.

19 Speaker Sounds such as the alarm come out of the speaker. Sound does not come out

when a set of earphones or headphones is connected to the headphone jack.

20 Serial connector Peripheral device with RS-232C/USB interface can be connected to the

connector. Remove the rubber cover and store it at the right side silo before

use.

21 Power terminals Terminals for supplying power from the Cradle. 22 Power adaptor port The dedicated AC adaptor (AD-S15050AE) can be connected to this port.

1.3.2 HA-C60IO (Basic Cradle)

Views

Fig. 1.3

Fig. 1.4

Table 1.5 Names of parts

No. Part Name Description

1 Serial connector This connector mates with the serial connector on the bottom of the terminal.

The power is also supplied to the terminal via this connector. 2 Alignment pegs Align the terminal with these two pegs when mounting it to the Basic Cradle. 3 Power adaptor port Connect the dedicated AC adaptor (AD-S15050AE) here. 4 RS-232C port This port is used when connecting to a PC for data transfer between the

terminal and the PC via RS-232C interface. 5 USB port This port is used when connecting to a PC for data transfer between the

terminal and the PC via USB interface.

1.3.3 HA-C61IO (Bridge Satellite Cradle)

Views

Refer to Table 1.6 for names of each part and its description.

Fig. 1.5

Fig. 1.6

Fig. 1.7

Table 1.6 Names of parts

No. Part Name Description

1 IrDA communication

port

Align this port with the IrDA communication port of the terminal for data

transfer via the IrDA interface. 2 Detection switch This switch detects when the terminal is correctly mounted on the Bridge

Satellite Cradle. 3 Status lamp

“POWER”

Indicates the power status.

Off : Power is off.

Green : Power is on and the terminal is correctly mounted on the Cradle.

Red : Power is on, but the terminal is not correctly mounted on the

Cradle. “DATA” Indicates the communication status. Off : No communication. Flashing green : Communication between the terminal and a PC is

established. Red : Connection problem in the Cradle. “LINE” Indicates the system status. Off : The system is not operational. Green : The system is operational.

4 Power terminals These terminals supply power to the terminal mounted on the Cradle. 5 Power switch Turns on the power on the Cradle. 6 Power adaptor port Connect the dedicated AC adaptor (AD-S42120AE) to this port. 7 RS-422 ports Use these two ports (“C-OUT” and “C-IN”) when connecting up to eight

Bridge Satellite Cradles in series.

8 RS-232C port Use this port when connecting the terminal and a PC via the RS-232C interface. 9 USB port Use this port when connecting the terminal and a PC via the USB interface.

10 DIP switches Use these switches to configure the settings on the Cradle.

+ 30 hidden pages