Casio EXILIM EX-H50, EXILIM EX-ZS200 User Guide

Digital Camera
User’s Guide
E
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/

Accessories

As you unpack your camera, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer.
Rechargeable lithium ion
battery (NP-80)
* The shape of the power
cord plug varies according to country or geographic area.
Power cord Strap
Basic Reference
USB-AC adaptor
(AD-C53U)
To attach the strap to the camera
1
USB cable
Attach strap here.
2

Read this first!

• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD. is forbidden under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost profits, or claims by third parties arising out of the use of Photo Transport or YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits caused by loss of memory contents due to malfunction, repair, or any other reason.
• Note that the example screens and product illustrations shown in this User’s Guide may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that provides a pixel yield in excess of 99.99%. This means that some very small number of pixels may not light or may remain lit at all times. This is due to the characteristics of the liquid crystal panel, and does not indicate malfunction.
Take a few test shots
Before shooting your final image, shoot a test shot to ensure that the camera is recording correctly.

Contents

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . . 9
❚❙
Quick Start Basics 12
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 18
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To select an auto recording mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❚❙
Snapshot Tutorial 32
Selecting the Recording Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 34
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Flash) . . 36
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . 39
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . (Make-up) . . 40
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . . 41
Shooting without Disturbing Others . . . . . . . . . . . . . . . . . . . (Silent Mode) . . 41
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . (ART SHOT) . . 44
Recording and Playing back Audio Only . . . . . . . . . . . (Voice Recording) . . 45
❚❙
Recording Movie Images 47
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contents
❚❙
Using BEST SHOT 49
To shoot an image with BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Recording a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-portrait) . . 51
❚❙
Advanced Settings 52
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(REC) . . 54
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Focus) . . . 54
Changing the Focus Frame Shape . . . . . . . . . . . . . . . . . . . (Focus Frame). . . 56
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area). . . 57
Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . . .(AF Assist Light). . . 58
Using Face Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Face Detection). . . 58
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CS). . . 59
Reducing the Effects of Camera and Subject Movement . . . . (Anti Shake). . . 60
Assigning Functions to the [4] and [6] Keys . . . . . . . . . . . . . . . (L/R Key). . . 61
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid). . . 61
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help). . . 62
Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory). . . 62
Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 63
Specifying Snapshot Image Quality . . . . . . . . . . . . (T Quality (Snapshot)). . . 63
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift). . . 63
Controlling White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . . 64
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 66
Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter). . . 66
❚❙
Viewing Snapshots and Movies 67
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Viewing Snapshots and Movies on a TV Screen. . . . . . . . . . . . . . . . . . . . . . . 69
❚❙
Other Playback Functions (PLAY) 71
Using the PLAY Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . 73
Performing Playback without Disturbing Others . . . . . . . . . . (Silent Mode) . . 74
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Rotation) . . 74
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . . 75
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . . 75
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) . . 76
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming) . . 76
Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Dubbing) . . 77
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . . 78
Contents
❚❙
Printing 79
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Using DPOF to Specify Images to be Printed and
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
❚❙
Using the Camera with a Computer 82
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 83
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 88
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Using an Eye-Fi Wireless SD Memory Card to
Transfer Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Eye-Fi) . . 90
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
❚❙
Other Settings (Set Up) 95
Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi) . . 95
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . . 95
Configuring a Startup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Startup) . . 96
Specifying the File Name Serial Number Generation Rule . . . . . (File No.) . . 96
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . . 97
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) . . 98
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . . 98
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . . 99
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . . 99
Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) . . 99
Configuring Auto Power Settings . . . . . . . . . . . . . . . . . . (Auto Power Off) . 100
Configuring [r] Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(REC) . 100
Disabling File Deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Ü Disabled) . 101
Selecting the Screen Aspect Ratio and
Video Output System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Video Out) . 101
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . . (Format) . 102
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . . (Reset) . 102
Contents
❚❙
Appendix 103
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Number of Snapshots/Movie Recording Time/
Voice Recording Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Contents

General Guide

The numbers in parentheses indicate the pages where each item is explained.
BackFront
5312 4 6 7 8
bo 8bnbmbl
[ ]
[ ]
[ ]
[
SET
[ ]
]
bk 9
Zoom controller
1
(pages 25, 42, 68, 68) Mode dial (page 32)
2
Shutter button (page 24)
3
[ON/OFF] (Power)
4
(page 22) Front lamp (page 39)
5
Flash (page 36)
6
Flash switch (page 36)
7
Strap hole (page 2)
8
Lens
9
Bottom
clck
cn cm
co
bt bs bpbqbr
Microphone
bk
(pages 48, 77) [r] (REC) button
bl
(pages 22, 24) Speaker
bm
Back lamp
bn
(pages 15, 16, 37) [0] (Movie) button
bo
(page 47) [SET] button (page 33)
bp
[USB/AV] port (pages 14, 15, 69)
ck
Connector cover
cl
Battery/memory card slots (pages 13, 20)
cm
Battery cover
cn
Tripod hole
co
Use this hole when attaching to a tripod.
[ ] (Delete) button
bq
(page 29) [p] (PLAY) button
br
(pages 22, 28) Control button
bs
([8][2][4][6]) (pages 11, 29, 33, 36,
52) Monitor screen
bt
(pages 9, 11)

Monitor Screen Contents and How to Change Them

The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.
. Snapshot Recording
Remaining snapshot memory capacity
1
(page 124)
9
Remaining movie memory capacity (page 47)
2
bk
Recording mode (page 24)
3
bl
White balance (page 64)
4
bm
Continuous shutter (page 59)
5
bn
Image deterioration indicator (page 43)
6
bo
Metering mode (page 126)
7
bp
Snapshot image size (page 34)
8
Snapshot image quality (page 63)
9
Movie image quality (page 36)
bk
Flash (page 36)
bl
Self-timer (page 39)
bm
Make-up (page 40)
bn
Lighting (page 41)
bo
Silent (page 41)
bp
Date/time (page 98)
bq
ISO sensitivity (page 66)
br
Exposure compensation (page 63)
bs
Focus frame (pages 25, 57)
bt
Timestamp indicator (page 98)
ck
Battery level indicator (page 17)
cl
Eye-Fi (page 90)
cm
Face Detection (page 58)
cn
Anti Shake (page 60)
co
Focus Mode (page 54)
cp
cp co
cn cm cl
341657
2
ck
bt
bs br
8
bq
. Shutter Button Half-pressed
Recording mode (page 24)
1
6
1
Flash (page 36)
2
ISO sensitivity (page 66)
3
Aperture value
4
2
Shutter speed
5
Focus frame (pages 25, 57)
3
6
4 5
NOTE
• Depending on recording settings, the aperture, shutter speed, and ISO sensitivity values may not appear on the monitor screen. These values will be orange if the Auto Exposure (AE) is not correct for some reason.
. Movie Recording
Recording mode (page 47)
12
7
1
White balance (page 64)
2
Remaining movie memory capacity (page 47)
3
3
Movie recording time (page 47)
4
4
Exposure compensation (page 63)
5
Battery level indicator (page 17)
6
Movie recording in progress (page 47)
7
6 5
. Snapshot Viewing
File type
1
Protect indicator (page 75)
2
Folder name/file name (page 92)
4
3
Snapshot image quality (page 63)
4
5
Snapshot image size (page 34)
5
6
ISO sensitivity (page 66)
6
7
Aperture value
7
8
Shutter speed
8
9
Date/time (page 98)
9
Battery level indicator (page 17)
bk
Eye-Fi (page 90)
bl
bl bk
2
31
10
. Movie Playback
File type
4 5
6
1
Protect indicator (page 75)
2
Folder name/file name (page 92)
3
Movie recording time (page 47)
4
Movie image quality (page 36)
5
Date/time (page 98)
6
Battery level indicator (page 17)
7
Eye-Fi (page 90)
8
8 7
1 2
3
. Configuring Monitor Screen Settings
You can turn display information on and off by pressing [8] (DISP). You can configure separate settings for the REC mode and PLAY mode.
REC mode
Information display on
Information display, remaining movie memory capacity, date/time on
Displays information about image settings, etc.
In addition to information about snapshot settings, displays remaining movie memory capacity and the date/time screen.
• You can specify the date style you want to use (page 99).
Information display off
PLAY mode
Information display on
Information display off
No settings or other information displayed.
Displays settings when shooting, current date and time, and other information.
No information displayed when shooting.
11

Quick Start Basics

What you can do with your CASIO camera

Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following main functions.
Premium Auto
Select Premium Auto recording and the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto delivers higher image quality than standard Auto.
*See page 24 for more information.
Make-up Function
The Make-up Function smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits.
*See page 40 for more information.
ART SHOT
A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting. “ART SHOT” provides the following effects: Toy Camera, Soft Focus, Light Tone, Pop, Sepia, Monochrome, Miniature, Fisheye.
*See page 44 for more information.
Silent
The Silent mode disables flash, mutes camera operation tones, and changes other settings to help ensure that shooting does not bother others around you.
*See page 41 for more information.
BEST SHOT
Simply select the sample scene you want and the camera sets up automatically. Then all you need to do is press the shutter button for perfect images.
*See page 49 for more information.
12
Quick Start Basics

First, charge the battery prior to use.

Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power. Never try to use any other type of battery.

To load the battery

1. Open the battery cover.
2. Load the battery.
With the EXILIM logo on the battery facing upwards (in the direction of the monitor screen), hold the stopper next to the battery in the direction indicated by the arrow as you slide the battery into the camera. Press the battery in until the stopper secures it in place.
3. Close the battery cover.
EXILIM logo
Battery
OK
Stopper
NG
13
Quick Start Basics
To replace the battery
Stopper
1. Open the battery cover and
remove the current battery.
2. Load a new battery.

Charge the Battery

You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below (
).
4
Charging time: Approximately 120 minutes
Power cord
1, 2, 3
,
2
1
Making sure that the mark on the USB cable connector is towards the monitor screen side, connect the cable to the camera.
[USB/AV] port
USB cable
(included with camera)
14
3
USB-AC adaptor
4
Quick Start Basics
IMPORTANT!
• Make sure that you insert the cable connector into the USB/ AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.
Back Lamp Operation
Lamp Status Description
Lit Red Charging
Abnormal ambient temperature, USB-
Flashing Red
AC adaptor problem, or battery problem (page 113)
Off Charging complete
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below ( camera is on, press [ON/OFF] (Power) to turn it off before connecting it to your computer. Charging time: Approximately 140 minutes
1, 2
). If the
1
[USB/AV] port
USB cable
(included with camera)
Back lamp
Computer
(power turned on)
USB port
2
USB
Making sure that the mark on the USB cable connector is towards the monitor screen side, connect the cable to the camera.
15
Quick Start Basics
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.
• Depending on the setup of your computer, you may not be able to charge the camera’s battery over a USB connection. If this happens, use of the USB-AC adaptor that comes with the camera is recommended.
• Charging is not performed while the connected computer is in the hibernate mode.
Back Lamp Operation
Lamp Status Description
Lit Red, (Lit/Flashing Amber)
Charging
Back lamp
Abnormal ambient temperature,
Flashing Red
charging taking abnormally long, or battery problem (page 113)
Off, (Lit Green) Charging complete
• The information in parentheses in the above table shows the lamp status while the camera is turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s battery (NP-80) without removing it from the camera. You also can charge the battery using an optionally available charger unit (BC-80L). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident.
• USB charging devices and power supply devices are subject to fixed standards. Use of an inferior device or a device that is not up to standard can cause malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you. Even in the case of a commercially available computer, certain USB port specifications may make it impossible to charge via the USB cable.
• A battery that is still warm due to normal use may not charge fully. Give the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of this, it is recommended that you charge the battery immediately before you need to use it.
• Charging the camera’s battery may cause interference with TV and radio reception. If this happens, plug the charger into an outlet that is further away from the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
16
Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below.
Remaining Power High Low
Battery Indicator ***
Indicator Color Cyan * Amber * Red * Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is dead will cause its date and time settings to be cleared. A message telling you to configure time and date settings will appear the next time you turn on the camera after restoring power. When this happens, configure date and time settings (page
98).
• See page 128 for information about battery life and number of shots.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (Flash Off) for the flash setting (page 36).
• Enable the Auto Power Off and the Sleep features to protect against wasting battery power when you forget to turn off the camera (pages 99, 100).
17
Quick Start Basics

Configuring Basic Settings the First Time You Turn On the Camera

The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market. To change the display language from Japanese in this case, use the procedure under “Specifying the Display Language (Language)” (page 99). Note that a version of this manual in the language you select may not be included with a camera intended for the Japanese market.
• Camera models sold in certain geographic areas may not support display language selection.
1. Hold down [ON/OFF] (Power) until the
back lamp lights green momentarily.
[ON/OFF] (Power)
2. Use [8], [2], [4], and [6] to select
the language you want and then press [SET].
[0] (Movie)
3. Use [8] and [2] to select a date style
and then press [SET].
Example: July, 10, 2015 YY/MM/DD DD/MM/YY MM/DD/YY
* 15/7/10 * 10/7/15 * 7/10/15
4. Set the date and the time.
Use [4] and [6] to select the setting you want to change and then use [8] and [2] to change it. To switch between 12-hour and 24-hour format, press [0] (Movie).
5. After setting the date and time, use [4] and [6]
to select “Apply” and then press [SET].
18
Quick Start Basics
If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings.
– Display language: Page 99 – Date and time: Page 98
NOTE
• Each country controls its local time offset and the use of summer time, and so they are subject to change.
• Removing the battery from the camera too soon after configuring time and date settings for the first time can cause the settings to be reset to their factory defaults. Do not remove the battery for at least 24 hours after configuring settings.

Preparing a Memory Card

Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 124.
. Supported Memory Cards
– SD Memory Card – SDHC Memory Card – SDXC Memory Card
• The above are supported memory card types as of August 2012.
• This camera supports use of SD memory cards of the following types and capacities: SD memory cards up to 2GB, SDHC memory cards from 2GB up to 32GB, SDXC memory cards from 32GB up to 2TB. Note that the ability to use any particular card with this camera, even if it satisfies the above capacity and type requirements, is not guaranteed.
• This camera supports use of Eye-Fi cards.
19
Quick Start Basics

To load a memory card

1. Press [ON/OFF] (Power) to turn off
the camera and then open the battery cover.
2. Load a memory card.
Positioning the memory card so its front is facing backwards (towards the lens side of the camera), slide it into the card slot all the way in until you hear it click securely into place.
3. Close the battery cover.
Back
Front Back
IMPORTANT!
• Never insert anything besides a supported memory card (page 19) into the memory card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center.
20
Quick Start Basics
To replace the memory card
Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one.
• Never remove a card from the camera while the back lamp is flashing green. Doing so can cause the image save operation to fail and even damage the memory card.

To format (initialize) a new memory card

Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again. However, if storing to a card has slowed down or if you notice any other abnormality, re-format the card.
• Be sure to use the camera to format a memory card. Formatting a card on a computer will result in a non-SD standard format, which can greatly slow down processing time and cause compatibility, performance, and other problems.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi Manager install files to your computer. Do this before formatting the card.
1. Press [ON/OFF] (Power) to turn on the camera and then press [SET].
2. Use [8] and [2] to select the “MENU” Control Panel option and then
press [SET] (page 33).
3. Use [4] and [6] to select the “Set Up” tab.
4. Use [8] and [2] to select “Format” and then press [6].
5. Use [8] and [2] to select “Format” and then press [SET].
21
Quick Start Basics

Turning the Camera On and Off

. To turn power on
Pressing [ON/OFF] (Power) enters the REC mode so you can record images. Pressing [p] (PLAY) while in the REC mode enters the PLAY mode, which you can use to view snapshots and movies (pages 28, 67).
•Pressing [p] (PLAY) turns on the camera and enters the PLAY mode.
•Pressing [r] (REC) while in the PLAY mode returns to the REC mode.
• Take care to ensure that nothing is restricting or coming into contact with the lens as it extends. Holding the lens with your hand so it cannot extend creates the risk of malfunction.
• About 10 seconds after you press [p] (PLAY) to enter the PLAY mode, the lens will retract into the camera.
• The Sleep function or Auto Power Off (pages 99, 100) will turn off power automatically if you do not perform any operation for a preset amount of time.
. To turn off the camera
Press [ON/OFF] (Power).
NOTE
• You also can configure the camera to turn on or off when you press [r] (REC) (page 100).
[ON/OFF] (Power)
[p] (PLAY) [r] (REC)
22
Quick Start Basics

Holding the Camera Correctly

Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot. Holding the camera still, carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases. This is especially important when available lighting is low, which slows down the shutter speed.
NOTE
• Take care that your fingers and the strap do not cover any of the areas indicated in the illustration.
• To protect against accidentally dropping the camera, attach the wrist strap and make sure it is around your fingers or wrist while you are operating the camera.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this camera only. Never use it for any other purpose.
Horizontal Vertical
Front lamp
Flash
Lens
Microphone
23
Quick Start Basics

Shooting a Snapshot

To select an auto recording mode

You can select one of two auto recording modes (Auto or Premium Auto) according to your digital imaging needs.
Setting
Auto This is the standard Auto recording mode.
Ÿ
Premium
Auto
REC Screen Icon Display
Description
With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto recording delivers higher image quality than standard Auto recording.
• Premium Auto recording takes longer to process image data after it is shot than Auto recording.
• It also requires more power (and runs down the battery quicker) than Auto.
1. Press [ON/OFF] (Power) to turn on the camera.
The camera will enter the REC mode.
• If the camera is in the PLAY mode, press [r] (REC).
2. Set the mode dial to [t] (Auto) or [Ÿ] (Premium Auto) to select Auto
recording mode.
Auto recording mode icon
[ON/OFF] (Power)
Shutter button
Mode dial
[r] (REC)
Remaining Snapshot Memory Capacity (page 124)
Monitor screen
24
Quick Start Basics

To shoot a snapshot

1. Point the camera at the subject.
If you are using Premium Auto, text will appear in the lower right corner of the monitor screen describing the type of shot the camera has detected.
• You can zoom the image, if you want.
w Wide Angle z Telephoto
Zoom controller
2. Half-press the shutter button to
focus the image.
When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green.
Half-press
Press lightly until the button stops.
Beep, beep (Image is in focus.)
When you half-press the shutter button, the camera automatically adjusts exposure and focuses on the subject it is currently pointed at. Mastering how much pressure is required for a half-press and a full-press of the shutter button is an important technique for good-looking images.
Back lamp
Focus frame
25
Quick Start Basics
3. Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
Full-press
Snap (Image is recorded.)
IMPORTANT!
• When “On” is selected for the Anti Shake setting (page 60), the camera will vibrate and emit a mechanical operation noise when you half-press the shutter. Note that this is normal and does not indicate malfunction.
Recording a Movie
Press [0] (Movie) to start movie recording. Press [0] (Movie) again to stop movie recording. See page 47 for details.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again.
. Shooting with Auto
If the subject is not in the center of the frame...
“Focus lock” (page 55) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen.
To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject. See “O Tracking” (page 57) for more information.
[0] (Movie)
26
Quick Start Basics
. Shooting with Premium Auto
• In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto. – Auto Focus is normally performed until you half-press the shutter button. – The camera automatically determines the focus point on the screen and focuses
there.
– Make-up (page 40)
Under the initial default camera setup when you purchase it, selecting Premium Auto as the auto recording mode (page 24) turns on the Make-up function.
• Shooting with Premium Auto can cause vibration and noise to occur due to lens operation. This does not indicate malfunction.
• When Shooting with Premium Auto, the message “Processing Premium Auto.” may appear on the monitor screen. If you feel the camera is taking too long to process data, try shooting with standard Auto instead.
• In some cases, Premium Auto may not be able to interpret the shooting environment correctly. If this happens, shoot with standard Auto.
27
Quick Start Basics

Viewing Snapshots

Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 67.
1. Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the snapshots currently stored in memory.
• Information about the displayed snapshot also is included (page 10).
• You also can clear the information to view only the snapshot (page 11).
• You can zoom in on the image by rotating the zoom controller towards z (page 68). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it.
[p] (PLAY)
2. Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
[6]
[6]
[4]
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is displayed will switch directly to the REC mode.
28
[4]
Quick Start Basics

Deleting Snapshots and Movies

If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images.
• In either the REC mode or PLAY mode, you can delete files simply by pressing [ ] (Delete).
[ ] (Delete)
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
• Deleting an audio snapshot (page 77) deletes both the snapshot and the audio file.
• You cannot delete files while movie or audio recording is in progress.
• The delete menu will not appear if you press [ ] (Delete) while “On” is selected for the camera’s “Ü Disabled” setting (page 101). You can delete files only while “Off” is selected for “Ü Disabled”.
. To delete a single file
1. Press [ ] (Delete).
2. Use [4] and [6] to scroll through the files until the one
you want to delete is displayed.
3. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [ ] (Delete).
29
Quick Start Basics
. To delete specific files
1. Press [ ] (Delete).
2. Use [8] and [2] to select “Delete Files” and then press [SET].
• This displays a file selection screen.
3. Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
4. Repeat step 3 to select other files, if you want. After you are finished
selecting files, press [ ] (Delete).
5. Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To exit the delete operation, press [ ] (Delete).
. To delete all files
1. Press [ ] (Delete).
2. Use [8] and [2] to select “Delete All Files” and then press [SET].
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files.” to appear.

Snapshot Shooting Precautions

Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand when shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual image will be recorded at the quality set for the image quality setting (page 63).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an image.
30
Quick Start Basics
. Auto Focus Restrictions
• Any of the following can make proper focus impossible. – Solid color wall or other very low contrast subject – Strongly back lit subject – Very shiny subject – Blinds or other subject with a repeating horizontal pattern – Multiple subjects at varying distances from the camera – Subject in a dark location – Camera movement while shooting – Fast-moving subject – Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 55) or Manual Focus (page
54).
31
Quick Start Basics

Snapshot Tutorial

Selecting the Recording Mode

Your camera has a variety of different recording modes. Before recording an image, rotate the mode dial to select the recording mode that suits the type of image you are trying to record.
Auto
Standard Auto recording mode. This is the mode you normally should use (page 24).
Ÿ
Premium Auto
With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto recording delivers higher image quality than standard Auto recording (page 24).
BEST SHOT
Simply select one of a collection of built-in sample scenes and the camera sets up automatically for beautiful images every time (page 49).
B
ART SHOT
A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting (page 44).
£
Voice Recording
Voice Recording lets you record audio only, without a snapshot or movie (page
45).
Mode dial
32
Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1. In the REC mode, press [SET].
• You can also display the Control Panel by pressing [2].
[SET]
[8] [2] [4] [6]
Available settings
Control Panel
1 2 3 4 5 6 7 8 9
2. Use [8] and [2] to select the setting you want to change.
This will select one of the Control Panel icons and display its settings.*
Snapshot image size/quality*2
1
(pages 34, 63) Movie image quality (page 36)
2
Flash (page 36)
3
Self-timer (page 39)
4
Make-up (page 40)
5
*1 Items displayed in the Control Panel depend on the recording mode. *2 Snapshot image quality cannot be changed using the Control Panel.
Lighting (page 41)
6
Silent (page 41)
7
REC menu display (page 52)
8
BEST SHOT (page 49)/
9
ART SHOT (page 44) scene selection
3. Use [4] and [6] to change the setting.
4. If you want to configure another setting, repeat steps 2 and 3.
5. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
• You can close the Control Panel by pressing [ ] (Delete).
1
33
Snapshot Tutorial
NOTE
• No icon is displayed for any Control Panel option (page 9) that is set to its initial default (reset) setting. An icon will appear only if you change the setting of the corresponding Control Panel option. The following are the initial defaults for Control Panel options. – Flash: Auto Flash – Self-timer: Off – Make-up: Off – Lighting: Off – Silent: Off
• You also can configure settings other than those listed above (page 52).

Changing the Image Size (Size)

. Pixels and image size
A digital camera image is a collection of small dots called “pixels”. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer pixels when printing an image (L size) through a print service, attaching an image to e-mail, when viewing the image on a computer, etc. The size of an image indicates how many pixels it contains, and is expressed as
x
horizontal pixels
vertical pixels.
Example:
Image size Pixels
x
10M 3648
3M 2048
2736 (Approximately 10 million pixels)
x
1536 (Approximately 3 million pixels)
Pixel
• Note that larger images have more pixels, so they take up more memory space.
• For information about image size, image quality, and number of images that can be stored, see page 124.
• For information about movie image size, see page 36.
• For information about resizing existing snapshots, see page 76.
34
Snapshot Tutorial
. To select the snapshot image size
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Snapshot Image Size” Control Panel
option (page 33).
3. Use [4] and [6] to select an image size and then press [SET].
Image Size (Pixels)
16M
x
(4608
3456)
3:2
x
3072)
(4608
16:9
x
2592)
(4608
10M
x
2736)
(3648
REC Screen Icon Display
Suggested Print Size and Application
Poster Print
Poster Print
HDTV
A3 Print
Description
Good detail for better clarity even for images cropped (page 76) from the original
Good detail 5M (2560
3M (2048
x
x
1920)
1536)
A4 Print
3.5" ×5" Print
Best when preserving memory
capacity is relatively more important
than image quality.
Image files are smaller, which is VGA (640
x
480)
E-Mail
better when attaching images to e-
mail. However, images are relatively
coarser.
• The initial factory default image size setting is “16M”.
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of television screens of the past. Your camera can record images that are compatible with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi print resolution).
35
Snapshot Tutorial
. Specifying Movie Image Quality
Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HD) setting will result in better image quality, but it also shortens the amount of time you can shoot.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Movie Image Quality” Control Panel
option and then press [SET] (page 33).
3. Use [4] and [6] to select the setting you want and then press [SET].
Image Quality (Pixels)
HD 1280
STD 640
• The 16:9 aspect ratio is available when “HD” is selected as the image quality.
• Memory capacity (Movie recording time you can shoot) will be affected by the quality settings you configure (page 125).
REC Screen Icon Display
x
720 30.2 Megabits/second 30 frames/second
x
480 10.6 Megabits/second 30 frames/second
Approximate Data Rate
Frame Rate

Using Flash (Flash)

If you plan to use flash, you need to slide the flash switch to open the flash unit.
Flash switch
Flash
1. In the REC mode, press [2] ( ) once.
36
[2] ( )
Snapshot Tutorial
2. Use [4] and [6] to select the flash setting you want and then press
[SET].
• If there are no indicators on the monitor screen, you can cycle through the flash
modes by pressing [2] ( ). You can turn display information on or off by pressing [8] (DISP) (page 11).
Setting
Auto Flash None
Flash Off Flash does not fire.
Flash On
Red Eye
Reduction
REC Screen Icon Display
Description
Flash fires automatically in accordance with exposure (amount of light and brightness) conditions.
Flash always fires. This setting can be used to brighten a subject that normally comes out dark due to daylight or backlight (daylight synchro flash).
Flash fires automatically. This type of flash can be used to reduce the chance of redness in the subject’s eyes.
3. Slide the flash switch to open the flash unit.
4. Press the shutter button to shoot.
Back lamp
Flashes orange while the flash is charging to indicate that image recording is disabled.
• You will not be able to take another flash snapshot until the lamp stops flashing
< indicates the flash will fire.
• For information about Flash Range, see page 127.
orange, which indicates that charging is complete.
37
Snapshot Tutorial
IMPORTANT!
• Even if you have the Control Panel setting configure for flash, the flash will not fire unless the flash unit is open.
• When not using flash, press down on the flash unit until it locks into place with a click.
• Foreign matter on the flash window can react with the light of the flash, producing some smoke and abnormal odor. Though this does not indicate malfunction, oil from your fingers and other foreign matter when left on the flash window can become difficult to clean off later. Because of this, you should make it a regular habit to wipe the window clean regularly with a soft, dry cloth.
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too close.
• Flash charging time (page 127) depends on operating conditions (battery condition, ambient temperature, etc.).
• Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to camera movement. Under such conditions, secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source can cause abnormal image colors.
• Select ? (Flash Off) for the flash setting when shooting in areas where flash photograph is prohibited.
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the image to close, which reduces the chance of red eye. Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from the camera.
38
Snapshot Tutorial

Using the Self-timer (Self-timer)

With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Self-timer” Control Panel option (page
33).
3. Use [4] and [6] to select the setting you want and then press [SET].
Setting
10sec
Self-timer
2sec
Self-timer
x3 Self­timer (Triple Self-timer)
Self­timer Off
• The front lamp flashes while the Self-timer countdown is in progress.
• You can interrupt an ongoing Self-timer countdown by pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features. CS, some BEST SHOT scenes
• The Triple Self-timer cannot be used together with the following features. Movie, Make-up
REC Screen Icon Display
None Turns off the Self-timer.
Description
10-second Self-timer
2-second Self-timer
• When shooting under conditions that slow down the shutter speed, you can use this setting to prevent image blur due to camera movement.
Shoots three images: one image 10 seconds after the shutter button is pressed, and the next two images as soon as the camera is ready after shooting the previous image. How long it takes for the camera to get ready to shoot depends on the image size and quality settings, whether or not a memory card is loaded in the camera, and the flash charge condition.
Front lamp
39
Snapshot Tutorial

Recording Beautiful Portraits (Make-up)

Make-up smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Make-up” Control Panel option (page
33).
3. Use [4] and [6] to select “Make-up: On” and then press [SET].
Setting
On Make-up function enabled.
Off None Make-up function disabled.
REC Screen Icon Display
Description
4. Point the camera at the subject and shoot.
NOTE
• Turning on Make-up automatically turns on Face Detection (page 58).
• Make-up cannot be used with the following functions. Movie recording, some BEST SHOT scenes, CS, Triple Self-timer, Super Macro
40
Snapshot Tutorial

Optimizing Image Brightness (Lighting)

You can use this setting to optimize the balance between bright areas and dark areas when shooting images.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Lighting” Control Panel option (page
33).
3. Use [4] and [6] to select the setting you want and then press [SET].
Setting
On
Off None Does not perform brightness correction.
NOTE
• Lighting is disabled during movie recording.

Shooting without Disturbing Others (Silent Mode)

The Silent mode automatically disables flash, mutes operation tones, and configures other settings to avoid disturbing others around you. It comes in handy when shooting in a museum or other areas where flash photograph is prohibited.
REC Screen Icon Display
Description
Performs brightness correction. When this option is selected, it takes longer for the image to be stored after the shutter button is pressed.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Silent Mode” Control Panel option (page
33).
41
Snapshot Tutorial
3. Use [4] and [6] to select “On” and then press [SET].
This enters the Silent mode, which is indicated by m (Silent Mode) on the monitor screen.
• The settings shown below are fixed and cannot be changed while in the Silent mode.
Setting Description
Flash Off
Self-timer Off
AF Assist Light Off
Sounds Off
• See the following for details. – Flash (page 36) – Self-timer (page 39) – AF Assist Light (page 58) – Sounds (page 95)
• Entering the Silent mode in the REC mode will also enter the Silent mode in the PLAY mode automatically (page 74).

Shooting with Zoom

Your camera provides you with 24X optical zoom (that changes the lens focal distance), which can be used in combination with digital zoom (that digitally processes the center portion of the image to enlarge it) for total zoom capabilities of 24X to 382.6X. The image deterioration point depends on the image size (page 44).
1. In the REC mode, rotate the zoom controller to zoom.
w Wide Angle z Telephoto
w (Wide Angle): Reduces the size of the subject and broadens the range. z (Telephoto) : Enlarges the subject and narrows the range.
Zoom controller
2. Press the shutter button to shoot the image.
IMPORTANT!
• Digital zoom is disabled while time stamping (page 98) is turned on.
42
Snapshot Tutorial
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the camera also has a function that lets you record using digital zoom without image deterioration (page 44).
• Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Digital zoom only is available during movie recording. You can adjust the optical zoom setting before you press the shutter button to start movie recording.
. Optical Zoom and Digital Zoom Switch Point
If you hold the zoom controller towards z (Telephoto), the zoom operation will stop when the optical zoom factor reaches its maximum. Momentarily releasing the zoom controller and then holding it again towards z (Telephoto) will switch to digital zoom, which you can use to set an even higher zoom factor.
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Image deterioration indicator
Focusing range (Displayed for Auto Focus, Macro Focus, and Manual Focus.)
Zoom bar
Undeteriorated image
quality range
1X
Optical/digital zoom switch point
• 24X optical zoom point
Deteriorated image
24X to 172.8X
Zoom pointer (Indicates current zoom.)
Image deterioration
43
quality range
96.0X to 382.6X
Snapshot Tutorial
• The image deterioration point depends on the image size (page
34). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point.
• Though digital zoom generally causes a deterioration of image quality, some digital zoom without image deterioration is possible with image sizes of “10M” and smaller. The range in which you can use digital zoom without image deterioration is indicated on the display. The deterioration point depends on the image size.
Image
Size
16M
3:2
16:9
10M 121.2X 30.2X
5M 172.8X 43.2X
3M 215.5X 54.0X
VGA 382.6X 172.8X
Maximum
Zoom Factor
96.0X 24.0X
Undeteriorated
zoom limit

Shooting with Artistic Effects (ART SHOT)

A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting.
Scene Description
Toy Camera
Soft Focus Blurs overall focus for a mysteriously soft effect.
Light Tone Weakens contrast to create an elegantly subdued effect.
Pop Strengthens saturation for richer colors.
Sepia Sepia colors are used to create a retro effect.
Monochrome Enhances contrast to create a grainy print effect.
Miniature
Fisheye
Darkens the periphery and changes hues for a toy camera effect.
Blurs some of the focus to make the image look like a miniature.
A fisheye lens effect can be used to create a variety of humorous images.
1. In the REC mode, set the mode dial to [B] (ART SHOT).
2. Press [SET].
3. Use [8] and [2] to select the bottom Control Panel option (ART) and
then press [SET] (page 33).
44
Snapshot Tutorial
4. Select the ART SHOT scene you want to use and then press [SET].
Select from among: Toy Camera, Soft Focus, Light Tone, Pop, Sepia,
Monochrome, Miniature, Fisheye.
5. Press the shutter button to shoot.
NOTE
• You cannot view the result of an effect on the camera’s monitor screen while composing the image.
• The ART SHOT cannot be used together with the following features. Face Detection, Make-up, Color Filter

Recording and Playing back Audio Only (Voice Recording)

Voice Recording lets you record audio only, without a snapshot or movie.
• For information about Voice Recording capacities, see page 125.
. Recording audio only
1. In the REC mode, set the mode dial to [£] (Voice Recording).
This causes ` to appear on the monitor screen.
2. Press the shutter button to start recording.
• The back lamp flashes green while recording is in progress.
• Pressing [SET] during recording will insert a marker into the recording. During playback, you will be able to jump to the markers in the recording.
Recording time
3. Press the shutter button again to stop audio
recording.
• To create another audio recording file, repeat steps 2 and 3.
• To turn off Voice Recording, set the mode dial to another recording mode.
NOTE
• You can use [8] (DISP) during audio recording to toggle the monitor screen on
and off.
• When monitor screen contents are turned off, selecting the “Voice Recording” will cause the monitor screen to turn off immediately (page 11).
45
Remaining recording
time
Snapshot Tutorial
About audio data
• Audio files can be played back on a computer with Windows Media Player or QuickTime. – Audio Data: WAVE/IMA-ADPCM (WAV extension)
. To play back an audio recording
1. In the PLAY mode, use [4] and [6] to display
the Voice Recording file you want to play.
` is displayed in place of an image for a Voice Recording file.
2. Press [0] (Movie) to start playback.
Voice Recording Playback Controls
Fast forward/fast reverse [4] [6]
Play/pause [SET]
Jump to marker
Volume adjustment Press [2] and then press [8] [2]
Monitor screen on/off [8] (DISP)
Playback end [0] (Movie)
NOTE
• See page 29 for information about deleting a voice recording file.
While playback is paused, press [ jump to the next marker and then press [SET] to resume playback.
4] or [6] to
46
Snapshot Tutorial

Recording Movie Images

To record a movie

1. Configure the quality setting for the movie (page 36).
The length of the movie you can record will depend on the quality setting you select.
2. In the REC mode, point the
camera at the subject and then press [0] (Movie).
This will start recording and display Y on the monitor screen. Movie recording includes monaural audio.
[0] (Movie)
Remaining recording time
(page 125)
Recording time
3. Press [0] (Movie) again to stop recording.
• Each movie can be up to 29 minutes long. Movie recording stops automatically after 29 minutes of recording. Movie recording also will stop automatically if memory becomes full before you stop movie recording by pressing [0] (Movie).
Shooting with BEST SHOT
With BEST SHOT (page 49), you can select the sample scene that matches the type of movie you are trying to shoot and the camera will change its setup accordingly, for beautiful movies every time. Movie Recording is disabled while certain BEST SHOT scenes are being used.
47
Recording Movie Images
NOTE
• Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction.
• The camera also records audio. Note the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers,
etc.
– Good recording results are not possible when the camera is
too far away from what you are trying to record.
Microphone
– Operating camera buttons while shooting can cause button
noise to be picked up in the audio.
– When any focus mode other than manual focus (W) is selected, continuous AF
may cause the camera to emit a mechanical operation sound, which may result in noise in audio recording.
• Shooting a very bright subject can cause a vertical band or a pink cast on the monitor screen image. This does not indicate malfunction.
• Using the camera’s built-in memory or certain types of memory cards can slow down processing speed. Whenever possible use an Ultra High-Speed Type memory card. Note, however, that not all operations can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain movie quality settings can result in too much time being required to record data, which can result in breaks in the image and/or audio during playback. If this happens, the » and Y will flash on the monitor screen.
• Only digital zoom can be used for zooming during movie recording. Since optical zoom is not possible while recording a movie, zoom as required before pressing [0] (Movie) to start recording.
• The effects of camera movement in an image become more pronounced when you shoot close up or with a large zoom factor. Because of this, use of a tripod is recommended under these conditions.
48
Recording Movie Images

Using BEST SHOT

BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings.
. Some Sample Scenes
Portrait Scenery

To shoot an image with BEST SHOT

1. In the REC mode, set the mode dial to
[b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select the bottom
Control Panel option (BS) and then press [SET] (page 33).
This will display a menu of BEST SHOT scenes.
4. Use [8], [2], [4], and [6] to move the
boundary to the scene you want to select.
• The scene menu has multiple pages.
8] and [2] to scroll between menu
Use [ pages.
• You can access information about the currently selected scene. See page 50 for details.
Self-portrait
(1 person)
Night Scene Portrait
[SET]
[b]
Currently selected scene (with boundary)
[8] [2] [4] [6]
Scene name
Scene number
49
Using BEST SHOT
5. Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a different scene.
• To select a different BEST SHOT scene, repeat the above procedure from step 1.
6. Press the shutter button (if you are shooting a snapshot) or [0] (Movie)
(if you are shooting a movie).
• To return to the auto recording mode, set the mode dial to [t] (Auto) or [Ÿ] (Premium Auto).
. Using Scene Information Screen
To find out more about a scene, select it with the boundary on the scene selection screen, and then rotate the zoom controller in either direction.
• To return to the scene menu, rotate the zoom controller again.
• To scroll between scenes, use [
• To configure the camera with the settings for the currently selected scene, press [SET].
. BEST SHOT Precautions
• Some BEST SHOT scenes cannot be used while recording a movie.
• “For YouTube” scene cannot be used while shooting a snapshot.
• The BEST SHOT YouTube scene sets up the camera for recording movies that are optimized for uploading to YouTube. Movies recorded with the YouTube scene are stored in a special folder to make them easy to locate for uploading (page 93).
• Your camera includes a sample scene that optimizes settings for auction site images. Depending on your camera model, the sample scene is named either “For eBay” or “Auction”. Images you record using the auction site sample scene are stored in a special folder so you can easily find them on your computer (page 93).
• High Sensitivity – The high sensitivity setting is disabled whenever the camera’s flash fires. – High sensitivity may not produce the desired results in very dark conditions. – When shooting with slow shutter speeds, use a tripod to protect against blurring
due to camera movement.
– Under certain lighting conditions, the camera will perform an automatic noise
filtering operation to reduce digital noise in the image. This operation causes the camera to take longer than normal to save the image and be ready for the next shot.
• BEST SHOT scene images were not shot using this camera.
4] and [6].
50
Using BEST SHOT
• Images shot using a BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors.
• You can modify the camera settings that are made after you select a BEST SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults when you select another BEST SHOT scene or turn off the camera.

Recording a Self-portrait (Self-portrait)

With this feature, you can shoot your own self-portrait simply by pointing the camera at your face. BEST SHOT has two self-portrait scenes from which to choose.
• Self-portrait (1 person): Shoots when the face of at least one person, including
• Self-portrait (2 people) : Shoots when the faces of at least two people, including
you, is detected.
you, are detected.
1. On the BEST SHOT scene menu, select “Self-portrait (1 person)” or
“Self-portrait (2 people)”.
2. Press the shutter button all the way down, and point
the camera at yourself.
About three seconds after you press the shutter button, the camera will go into Auto Shutter standby and start face detection. After the camera detects the specified number of faces, focuses, and adjusts the exposure to the proper level, it will beep twice and then release the shutter automatically.
• The camera will emit a shutter sound and the front lamp will flash twice when the shutter is released.
• To cancel Auto Shutter standby, press [SET].
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again.
• Shooting with the self-portrait feature may produce a blurred image when shooting in areas where lighting is dim, which results in a very slow shutter speed setting.
• The Auto Power Off (page 100) trigger time is fixed at five minutes while the camera is in Auto Shutter standby. Sleep (page 99) is disabled while Auto Shutter is being used.
51
Using BEST SHOT

Advanced Settings

The following are menu operations you can use to configure various camera settings.
• REC mode menu contents and operations are different from those in the PLAY mode. This section explains operations using the REC menu screen. See page 71 for information about PLAY menu screen operations.

Using On-screen Menus

. Example REC Menu Screen Operation
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “MENU” Control
Panel option and then press [SET] (page 33).
This will display the REC menu screen.
3. Use [4] and [6] to select the tab where the menu
item you want to configure is located.
4. Use [8] and [2] to select the menu item you
want, and then press [6].
5. Use [8] and [2] to change the setting of the
selected menu item.
6. After the setting is the way you want, press
[SET] to apply the setting and return to the viewfinder screen.
• Pressing [4] instead of [SET] applies the
selected setting and returns to the menu item selection.
• To configure settings on another tab after pressing [ use [ up to the tabs, and then use [ select the tab you want.
4] to return to the menu item selection,
8] or [ ] (Delete) to move the highlighting
4] and [6] to
[SET]
[8] [2] [4] [6]
Example: When “T Quality” is selected on the “Quality” tab
Tabs
Settings
Selected menu item
52
Advanced Settings
NOTE
• [ ] (Delete) provides a helpful way to navigate around tabs and menus. – Pressing [ ] (Delete) while a tab is selected will display the viewfinder screen. – Pressing [ ] (Delete) while menu item or setting is selected will “back step” in
the following sequence: Settings
* Menu items * Tab.
• Depending on the recording mode, some of the items on the menu that appears may not be usable.
. REC Menu Operations in This Manual
REC menu operations are represented in this manual as shown below. The following operation is the same one described under “Example REC Menu Screen Operation” on page 52.
Use [8] and [2] to select the “MENU” Control Panel option and then press [SET].
Use [4] and [6] to select the “Quality” tab.
Procedure
[r] (REC) * [SET] * MENU * “Quality” Tab *
T Quality
Press
[r] (REC).
Press
[SET].
Use [8] and [2] to select “T Quality” and then press [6].
53
Advanced Settings

REC Mode Settings (REC)

Selecting a Focus Mode (Focus)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Focus
Auto Focus is the only focus mode available while Make-up (page 40) or Face Detection (page 58) is enabled. To select another focus mode, first turn off Make-up and Face Detection.
Approximate Focus
Range
1
*
Settings
REC
Screen
Icon
Display
Type of Shot
Focus Mode
Snap-
Movies Snapshot Movies
shot
10 cm to
Q Auto Focus
´ Macro
None
General recording
Close ups
Automatic
9 (infinity) (3.9" to 9) (Wide Angle)
2 cm to 50 cm (0.79" to 19.7") (Second step zoom from the
Fixed distance
2
*
Widest Angle setting)
Á
Super Macro
W Manual Focus
Close ups
When you want to focus manually
Manual
2 cm to 50 cm (0.79" to 19.7")
10 cm to 9 (infinity)
o 9) (Wide Angle)
(3.9" t
2
*
*1 The focus range is the distance from the lens surface. *2 The minimum changes along with the optical zoom setting.
Super Macro
Super Macro fixes optical zoom at a position that allows you to shoot from the closest distance to the subject. The result is closer and larger subject images.
NOTE
• Zoom is fixed while Super Macro is selected, so no zoom operation is performed when you rotate the zoom controller.
54
Advanced Settings
To focus with manual focus
1. On the monitor screen, compose the image so
the subject you want to focus on is within the yellow boundary.
2. Watching the image on the monitor screen use
[4] and [6] to adjust focus.
• At this time the image that is within the boundary will enlarge and fill the monitor screen, which aids in focusing. If you do not perform any operation for two seconds while the enlarged image is displayed, the screen in step 1 will re-appear.
NOTE
• An Auto Macro feature detects how far the subject is from the lens and automatically selects either Macro Focus or Auto Focus accordingly.
• Auto Macro can be used when recording snapshots only.
• When using the “Miniature” or “Fisheye” BEST SHOT scene, you can select either Super Macro or Manual Focus only as the focus mode.
• Use of the flash together with Macro Focus can cause the light of the flash to become blocked, which may result in unwanted lens shadows in your image.
• Whenever you perform an optical zoom operation while shooting with Auto Focus, Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell you the focus range, as shown below. Example: oo* cm to 9
* oo is the actual focusing range value.
• The operations assigned to the [
61) are disabled while Manual Focus is selected as the focus mode.
4] and [6] keys with the “L/R Key” setting (page
Using Focus Lock
“Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen.
• To use focus lock, select “U Spot” for the Auto Focus area (page 57).
Yellow boundary
Subject to be focused on
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then half-press the shutter button.
55
Focus frame
Advanced Settings
2. Keeping the shutter button half-pressed
(which maintains the focus setting), move the camera to compose the image.
3. When you are ready to shoot the image,
press the shutter button the rest of the way down.
NOTE
• Focus lock also locks exposure (AE).

Changing the Focus Frame Shape (Focus Frame)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Focus Frame
You can use this procedure to select from among five different shapes, including a heart shape, for the focus frame.
Settings ß¹ ™ ¬ μ
NOTE
• Half-pressing the shutter button will cause the focus frame to change one of the shapes shown below.
Focus successful
Focus not successful
• When shooting with face detection, the frame shape is ß.
56
Advanced Settings

Specifying the Auto Focus Area (AF Area)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * AF Area
Spot
Multi
Tracking
This mode takes readings of a small area in the center of the image. This setting works well with focus lock (page 55).
When you half-press the shutter button while this setting selected, the camera will select the optimum Auto Focus area from among nine possible areas. The focus frame of the area where the camera focuses will be displayed in green.
Half-pressing the shutter button focuses on the subject and causes the focus frame to track the movement of the subject.
U Spot” orO Tracking”
Focus frame
I Multi”
Focus frame
IMPORTANT!
• Auto Focus is disabled when W (Manual Focus) is selected for the focus mode (page 54), even if you select an AF area.
• Selecting “O Tracking” can cause vibration and noise to occur due to lens operation while tracking a subject. This does not indicate malfunction.
• While Face Detection (page 58) is turned on, regardless of the current AF Area setting, “U Spot” (center) focusing will be used automatically whenever a face cannot be detected for some reason.
57
Advanced Settings

Using the Auto Focus Assist Light (AF Assist Light)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shooting portraits from short distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Front lamp

Using Face Detection (Face Detection)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Face Detection
When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly.
1. Use [8] and [2] to select “On” and then press [SET].
2. Point the camera at the subject(s).
The camera will detect human faces and display a frame around each one.
3. Half-press the shutter button.
The camera will focus and the frames around the faces it focuses on will turn green.
Face Detection icon
4. Press the shutter button the rest of the way
down.
58
Advanced Settings
IMPORTANT!
• The camera performs center focus if it cannot detect a face.
• The only focus mode available while face detection is enabled is Auto Focus (AF).
• Face detection may take a bit longer when you hold the camera sideways.
• Detection of the following types of faces is not supported. – Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade – A profile or a face that is at an angle – A face that is very far away and small, or very close and large – A face in an area that is very dark – The face of a pet or some other non-human subject
• Face detection cannot be used in combination with any of the following features. – Some BEST SHOT scenes –ART SHOT – Movie Recording
• The AF area setting (page 57) is ignored while face detection is enabled.
• Turning on Premium Auto (page 24) or Make-up (page 40) automatically turns on Face Detection.

Using Continuous Shutter (CS)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * CS
While Continuous Shutter is turned on, images are continually recorded until memory becomes full, as long as you keep the shutter button depressed. Releasing the shutter button stops shooting.
NOTE
• With continuous shutter, exposure and focus for the first image are applied for successive images as well.
• Continuous shutter cannot be used in combination with any of the following. – Premium Auto – Make-up – Some BEST SHOT scenes – Movie Recording –Self-timer
• When using a continuous shutter mode, keep the camera still until all recording is finished.
• The continuous shutter rate depends on the current image size and image quality settings.
• The speed of Continuous Shutter depends on the type of memory card loaded in the camera and the amount of free space available for storage. When shooting to built-in memory, continuous shutter shooting is relatively slow.
59
Advanced Settings

Reducing the Effects of Camera and Subject Movement (Anti Shake)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Your digital camera is equipped with a CCD shift type camera shake correction feature and a high-sensitivity anti image blur feature. These two features work in concert to minimize the effects of hand and subject movement.
Setting
On
Off None Turns off Anti Shake settings.
DEMO
NOTE
• Anti Shake is disabled during movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you half-press the shutter button while “On” is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot.
• Shooting while “On” is selected can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn off Anti Shake.
• Anti Shake cannot be used with the following functions. – Some BEST SHOT scenes
REC Screen Icon Display
Description
Minimizes the effects of hand and subject movement.
Half-pressing the shutter button demonstrates the effect of Anti Shake. However, the image is not recorded.
60
Advanced Settings
Assigning Functions to the [4] and [6] Keys (L/R Key)
Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * L/R Key
You can assign one of the four functions listed below to the [4] and [6] keys.
Setting [4]/[6] key operation
EV Shift Adjusts the EV shift value (page 63).
White Balance Changes the white balance setting (page 64).
ISO Changes the ISO Sensitivity setting (page 66).
Self-timer
Off Cancels [
* Sets the self-timer time (page 39).
4] and [6] key assignments.
* While Make-up is turned on, you will be able to use the [4] and [6] keys to select
one of the following settings: 10sec Self-timer, 2sec Self-timer, Self-timer Off. Note that you will not be able to configure the self-timer setting with the [4] and [6] keys while Continuous Shutter (CS) is turned on.
NOTE
• The “L/R Key” setting cannot be used together with the following features. – Some BEST SHOT scenes

Displaying the On-screen Grid (Grid)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Grid
The on-screen grid can be displayed on the REC mode monitor screen for easy vertical and horizontal alignment when composing images.
61
Advanced Settings

Using Icon Help (Icon Help)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for certain icons when you switch between REC functions.
Functions Supported by Icon Help
• REC Mode, Flash, White Balance, Self-timer, EV Shift

Configuring Power On Default Settings (Memory)

Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.
Setting Disabled (Initial Default Setting) Enabled
Flash Auto
Focus AF (Auto Focus)
White Balance Auto
ISO Auto
AF Area Multi
CS Off
Self-timer Off
MF Position
Zoom Position
Position before manual focus was selected.
* Full wide
* Optical zoom setting only.
Setting at power off
62
Advanced Settings

Image Quality Settings (Quality)

Specifying Snapshot Image Quality (T Quality (Snapshot))
Procedure
[r] (REC) * [SET] * MENU * “Quality” Tab * T Quality (Snapshot)
Setting
Fine Gives image quality priority.
Normal Normal
• The “Fine” setting helps to bring out details when shooting a finely detailed image of nature that includes dense tree branches or leaves, or an image of a complex pattern.
• Memory capacity (the number of images you can record) will be affected by the quality settings you configure (page 124).
REC Screen Icon Display
Description

Correcting Image Brightness (EV Shift)

Procedure
[r] (REC) * [SET] * MENU * “Quality” Tab * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1. Use [8] and [2] to adjust the exposure compensation value.
[8] : Increases the EV value. A higher EV
value is best for light-colored subjects and backlit subjects.
[2] : Decreases the EV value. A lower EV
value is best for dark-color subjects and for shooting outdoors on a clear day.
To cancel exposure compensation, change the EV value to 0.0.
63
Advanced Settings
2. Press [SET].
This applies the exposure compensation value. The exposure compensation value you set remains in effect until you change it or turn off the camera (which causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation.

Controlling White Balance (White Balance)

Procedure
[r] (REC) * [SET] * MENU * “Quality” Tab * White Balance
You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
Setting
Auto None
(Daylight) For shooting outdoors on a clear day
(Overcast)
(Shade)
(DayWhite
Fluorescent)
(Daylight
Fluorescent)
(Tungsten) For shooting under light bulb lighting
REC Screen Icon Display
Description
Configures the camera to adjust white balance automatically.
For shooting outdoors on an overcast rainy day, in the shade, etc.
For shooting on a clear day in the shade of trees or buildings
For shooting under white or day white fluorescent lighting
For shooting under daylight fluorescent lighting
64
Advanced Settings
Setting
Manual
• When “Auto” is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible. If this happens, select the white balance setting that matches your shooting conditions (Daylight, Overcast, etc.).
REC Screen Icon Display
Description
For configuring the camera manually to suit a particular light source
Select “Manual”.
1
Under the lighting conditions
2
you plan to use when shooting, point the camera at a blank white piece of paper so it fills the entire monitor screen and then press the shutter button. Press [SET].
3
The white balance setting is retained even if you turn off the camera.
Blank white paper
65
Advanced Settings

Specifying ISO Sensitivity (ISO)

Procedure
[r] (REC) * [SET] * MENU * “Quality” Tab * ISO
ISO sensitivity is a measure of sensitivity to light.
Setting
Auto None Adjusts sensitivity automatically according to conditions.
ISO 64
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
• “Auto” ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
REC Screen Icon Display
Description
Lower sensitivity
Higher sensitivity
Slow shutter speed
Fast shutter speed (Set for shooting in dimly lit areas.)
Less noise
Some coarseness (increased digital noise)

Using Built-in Color Filters (Color Filter)

Procedure
[r] (REC) * [SET] * MENU * “Quality” Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, Purple
• You cannot configure a color filter setting while using ART SHOT (page 44) as the recording mode.
66
Advanced Settings

Viewing Snapshots and Movies

Viewing Snapshots

See page 28 for the procedure for viewing snapshots.

Viewing a Movie

1. Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2. Press [0] (Movie) to start
Movie icon: »
playback.
Recording time
Image quality
Movie Playback Controls
Fast forward/ fast reverse
Play/pause [SET]
1 frame forward/ back
Volume adjustment
Information display on/off
Zoom
Stop playback [0] (Movie)
• Playback may not be possible for movies not recorded with this camera.
[4] [6]
• Each press of either button increases the speed of the fast forward or fast reverse operation.
• To return to normal playback speed, press [SET].
[4] [6]
• Holding down either button scrolls continuously.
Press [2] and then press [8] [2].
• Volume can be adjusted only while movie playback is in progress.
[8] (DISP)
Rotate the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. You can zoom a movie image up to 4.5 times normal size.
67
Viewing Snapshots and Movies

Zooming an On-screen Image

1. In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2. Rotate the zoom controller towards z ([) to
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Rotate the zoom controller towards w to unzoom the image.
– When monitor screen contents are turned on,
a graphic in the lower right corner of the screen shows what part of the zoomed image is
currently displayed. – To exit the zoom screen, press [ ] (Delete). – Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up
to the full 8X.

Displaying the Image Menu

1. In the PLAY mode, rotate the zoom controller
towards w (]).
Use [8], [2], [4] and [6] to move the selection boundary around the image menu. To view a particular image, use [8], [2], [4], or [6] to move the selection boundary to the image you want and then press [SET].
Zoom factor
Image area
Current display area
Boundary
68
Viewing Snapshots and Movies

Viewing Snapshots and Movies on a TV Screen

1. Use an optionally available AV cable (EMC-7A) to connect it to the TV.
Yellow
TV
AUDIO IN jacks (white)
VIDEO IN jack (yellow)
• For details about connecting to the camera and precautions when connecting, see page 15.
White
AudioVideo
[USB/AV] port
AV cable
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is connected.
3. Press [p] (PLAY).
This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.
• You also can change the aspect ratio of the screen and the video output system (page 101).
4. Now you can display images and play back movies as you normally do.
NOTE
• Audio is monaural.
• Certain TVs may cut off part of the images.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [8] (DISP) to change the display contents.
69
Viewing Snapshots and Movies
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device using an optionally available AV cable (EMC-7A).
– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals. – Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. When recording images to an external device, use [8] (DISP) to clear all indicators from the monitor screen (page 11). For information about connecting a monitor to the recording device and about how to record, see the user documentation that comes with the recording device you are using.
70
Viewing Snapshots and Movies

Other Playback Functions (PLAY)

This section explains menu items that you can use to configure settings and perform other playback operations.

Using the PLAY Panel

Pressing [SET] in the PLAY mode will display the PLAY Panel.
. Example PLAY Panel Operation
1. In the PLAY mode, press [SET].
The PLAY Panel will appear along the right side of the monitor screen.
PLAY Panel[SET]
2. Use [8] and [2] to select the
PLAY Panel item you want, and then press [SET].
[8] [2]
3. The following describes the operations you can perform for each of the
PLAY Panel items.
Exit Exits the PLAY Panel.
The operation that is performed when this item is selected
Playback Start
Slideshow
Silent Mode
depends on the type of file that is currently displayed on the monitor screen.
• Movie: Starts movie playback (page 67).
• Voice recording: Starts voice recording playback (page 46).
• Audio snapshot: Starts audio playback (page 77).
Displays a slideshow menu. See “Playing a Slideshow on the Camera (Slideshow)” (page 73) for slideshow menu operations.
The Silent mode turns off camera operation sounds so you can avoid disturbing others around you when playing back images.
71
Other Playback Functions (PLAY)
Displays the PLAY menu. You can perform the following operations on the PLAY menu.
Menu
Use [4] and [6] to select the tab
1
where the menu item you want to configure is located. Use [8] and [2] to select the menu
2
item you want, and then press [6]. Use [8] and [2] to change the
3
setting of the selected menu item. Press [SET] to apply the setting.
4
NOTE
• Pressing [ ] (Delete) performs one of the following operations. – If you previously selected a tab, pressing [ ] (Delete)
returns to the viewfinder screen.
– If you previously selected menu item, pressing [ ] (Delete)
returns to the tab.
Tabs
Selected menu item
. PLAY Menu Operations in This Manual
PLAY menu operations are represented in this manual as shown below. The following operation is the same one described under “Example PLAY Panel Operation” on page 71.
Use [8] and [2] to select the “MENU” PLAY Panel option and then press [SET].
Procedure
[p] (PLAY) * [SET] * MENU * “PLAY” Tab * Protect
Press
[p] (PLAY).
Press [SET].
Use [4] and [6] to select the “PLAY” tab.
Use [8] and [2] to select “Protect” and then press [6].
72
Other Playback Functions (PLAY)

Playing a Slideshow on the Camera (Slideshow)

1. In the PLAY mode, press [SET].
2. Use [8] and [2] to select the “Slideshow” PLAY Panel option and then
press [SET] (page 71).
Start Starts the slideshow.
Time
Interval
Effect
• To stop the slideshow, press [ ] (Delete). Pressing [SET] instead of [ ] (Delete) stops the slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one image to another.
• The time required for transition from one image to another may be longer in the case of an image that was not recorded with this camera.
Time from the start to the end of the slideshow 1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”. If you specify a value from 1 to 30 seconds, images change at the specified interval, but the audio portion of movies and audio snapshots will continue to play until the end. When the slideshow reaches a movie file while “MAX” is selected, only the first frame of the movie will displayed. Voice Recording files are not played back when “MAX” is selected.
Turns effect on or off. On: Turns on the image change effect and background music. Off: No image change effect or background music
73
Other Playback Functions (PLAY)

Performing Playback without Disturbing Others (Silent Mode)

The Silent mode turns off camera operation sounds so you can avoid disturbing others around you when play back images.
1. In the PLAY mode, press [SET].
2. Use [8] and [2] to select the “Silent Mode” PLAY Panel option and
then press [SET] (page 71).
3. Use [8] and [2] to select “On” and then press [SET].
This enters the Silent mode, which is indicated by m (Silent Mode) on the monitor screen.
• The settings shown below are fixed and cannot be changed while in the Silent mode.
Setting Description
Flash Off
Self-timer Off
AF Assist Light Off
Sounds Off

Rotating an Image (Rotation)

Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * Rotation
1. Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[ ] (Delete).
NOTE
• Note that this procedure does not actually change the image data. It simply alters how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu screen.
74
Other Playback Functions (PLAY)

Selecting Images for Printing (DPOF Printing)

Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * DPOF Printing
See page 79 for details.

Protecting a File Against Deletion (Protect)

Procedure
[p] (PLAY) * [SET] * MENU * “PLAY” Tab * Protect
Protects specific files.
Use [4] and [6] to scroll through the files
1
until the one you want to protect is displayed. Use [8] and [2] to select “On” and then
On
All Files: On
2
press [SET]. An image that is protected is indicated by the icon. To protect other files, repeat steps 1 and 2.
3
To exit the protect operation, press [ ] (Delete). To unprotect a file, select “Off” instead of “On” in step 2 above.
Protects all files.
Use [8] and [2] to select “All Files: On” and then press [SET].
1
Press [ ] (Delete).
2
To unprotect all files, select “All Files: Off” instead of “All Files: On” in step 1 above.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format operation (page 102).
75
Other Playback Functions (PLAY)

Resizing a Snapshot (Resize)

Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can select resize an image to one of three image sizes: 10M, 5M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the recording date of the original snapshot.

Cropping a Snapshot (Trimming)

Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * Trimming
You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained.
Use the zoom controller to zoom the image to the size you want, use [8], [2], [4], and [6] to display the portion of the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the same as the recording date of the original snapshot.
Part of snapshot that is
Zoom factor
Represents
snapshot area
currently displayed
76
Other Playback Functions (PLAY)

Adding Audio to a Snapshot (Dubbing)

Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * Dubbing
You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.
1. Press [SET] to start audio recording.
Remaining recording time
2. Press [SET] again to stop audio recording.
• Take care that you do not block the camera’s microphone with your fingers while recording.
• Good recording results are not possible when the camera is too far away from what you are trying to record.
• Your camera supports the following audio data formats. – Audio Format: WAVE/IMA-ADPCM (WAV extension)
• You cannot add audio to an image that is protected.
• To delete audio, perform the following operation: Dubbing * Delete * [SET] * [ ] (Delete).
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.
. To play snapshot audio
Microphone
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a ˆ icon.
2. Press [0] (Movie) to start playback.
77
Other Playback Functions (PLAY)
Voice Recording Playback Controls
Fast forward/fast reverse [4] [6]
Play/pause [SET]
Volume adjustment
Display content switching [8] (DISP)
Stop playback [0] (Movie)
• Audio of an Audio Snapshot also can be played back on a computer with Windows Media Player or QuickTime.
Press [2] and then press [8] [2].

Copying Files (Copy)

Procedure
[p] (PLAY) * [SET] * MENU * “PLAY” Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a memory card to built-in memory.
Built-in * Card
Card * Built-in
NOTE
• You can copy snapshots, movies, audio snapshots, or Voice Recording files you recorded with this camera.
Copies all files from built-in camera memory to a memory card. This option copies all the files in built-in camera memory. It cannot be used to copy a single file.
Copies a single file on the memory card to camera built-in camera memory. Files are copied to the folder in built-in memory whose name has the largest serial number.
Use [4] and [6] to select the file you want to copy.
1
Use [8] and [2] to select “Copy” and then press [SET].
2
78
Other Playback Functions (PLAY)

Printing

Printing Snapshots

Professional Print Service*
You can take a memory card that contains the images you want to print to a professional print service and have them printed.
Printing on a Home Printer*
You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer.
Printing with a Computer
After transferring the images to your computer, use commercially available software to print.
* You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 79).

Using DPOF to Specify Images to be Printed and the Number of Copies

. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service.
• Whether or not you will be able to use DPOF settings for printing depends on the printer you are using.
• Some professional print services may not support DPOF.
79
Printing
. Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * DPOF Printing * Select images
1. Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3. Press [SET].
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * DPOF Printing * All images
1. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
2. Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF settings you configured for the images. To clear DPOF settings, specify “00” for the number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it includes DPOF settings for the images to be printed and the number of copies. If you don’t, the print service may print all the images without regard to your DPOF settings, or they may ignore your date stamp setting.
80
Printing
. Date Stamping
You can use one of the following three methods to include the recording date in the printout of an image.
Configuring camera settings
Configure DPOF settings (page 79). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t.
Configure the Camera’s Time Stamp setting (page 98).
• The camera’s Time Stamp setting imprints the date into a snapshot when you shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date stamped with the camera’s Time Stamp function. Doing so can cause the two stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
. Standards Supported by the Camera
•Exif Print Printing on a printer that supports Exif Print uses information about shooting conditions recorded with the image to enhance printed image quality. Contact your printer manufacturer for information about models that support Exif Print, printer upgrades, etc.
81
Printing

Using the Camera with a Computer

Things you can do using a computer...

You can perform the operations described below while the camera is connected to a computer.
Save images to a computer and view them there
Play back and edit movies
Transfer images stored on your computer to camera memory
Upload movie files to YouTube
• Save images and view them manually (USB connection) (pages 84, 88).
• Transfer images to a computer automatically over a wireless LAN for viewing (Eye-Fi) (page 90).
• You can play back movies (pages 86, 89).
• To edit movies, use commercially available software as required.
In addition to images, you also can transfer screen shot images from your computer to the camera (Photo Transport
Movies files recorded using the “For YouTube” BEST SHOT scene can be easily uploaded to YouTube (YouTube Uploader for CASIO*).
*).
* Windows only
The procedures you need to perform when using the camera with your computer and when using the software are different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a Windows Computer” on page 83.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
87.
82
Using the Camera with a Computer

Using the Camera with a Windows Computer

Install the required software in accordance with the version of Windows you are running and what you want to do.
When you want to do this:
Save images to a computer and view them there manually
Operating System Version
Windows 7, Windows Vista, Windows XP (SP3)
Install this software:
Installation not required. 84
Installation not required.
Play movies
Windows 7, Windows Vista, Windows XP (SP3)
• Windows Media Player, which is already installed on most computers, can be used for playback.
Photo Transport 1.0*
• Download this software from the website below. http://www.casio-intl.com/support/
Transfer images to the camera
Windows 7, Windows Vista, Windows XP (SP3)
• Download the user documentation for this software from the website below. http://www.exilim.com/manual/
• System Requirements Memory: At least 64MB Hard Disk Drive Space: At least 2MB
YouTube Uploader for CASIO*
• Download this software from the
Upload movie files to YouTube
Windows 7, Windows Vista, Windows XP (SP3)
website below. http://www.casio-intl.com/support/
• Download the user documentation for this software from the website below. http://www.exilim.com/manual/
* Photo Transport and YouTube Uploader for CASIO will not run under 64-bit
versions of Windows OS.
See page:
86
83
Using the Camera with a Computer
. Precautions for Windows Users
• The software requires Administrator privileges to run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.

Viewing and Storing Images on a Computer

You can connect the camera to your computer in order to view and store images (snapshot and movie files).
Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially available card reader to access image files directly from the camera’s memory card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1. Turn off the camera and
USB port
then use the USB cable that comes with the camera to connect it to your computer.
• For details about connecting to the camera and precautions when connecting, see page 15.
USB cable
(included with camera)
2. Turn on the camera.
• The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.
• Charging continues even if the camera is turned on.
3. Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
84
Using the Camera with a Computer
4. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.
5. Right-click the “DCIM” folder.
6. On the shortcut menu that appears, click “Copy”.
7. Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 7, Windows Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you want to keep the existing “DCIM” folder, you need to change its name or move it to a different location before performing the next step.
8. Windows 7 users: On the “Documents” “Organize” menu, select
“Paste”. Windows Vista users: On the “Documents” “Edit” menu, select “Paste”. Windows XP users: On the “My Documents” “Edit” menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your “Documents” (Windows 7, Windows Vista) or “My Documents” (Windows XP) folder. You now have a copy of the files that are in camera memory on your computer.
9. After you finish copying images, disconnect the camera from the
computer.
On the camera, press [ON/OFF] (Power) to turn off the camera. After checking to make sure that the back lamp is unlit or lit red, disconnect the USB cable.
85
Using the Camera with a Computer
. To view images you copied to your computer
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 93.
• An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation.

Playing Movies

Windows Media Player, which is already installed on most computers, can be used for movie playback. To play back a movie, first copy the movie to your computer and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back movies recorded with this camera on a computer.
Operating System : Windows 7, Windows Vista, Windows XP (SP3) CPU : Image Quality “HD”:
Required Software: Windows Media Player, DirectX 9.0c or higher
• The above are recommended system environments. Configuring one of these environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of movies.
Pentium 4 3.2 GHz or higher
Image Quality “STD”:
Pentium M 1.0 GHz or higher Pentium 4 2.0 GHz or higher
86
Using the Camera with a Computer
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience problems, try the following. – Try recording movies with a quality setting of “STD”. – Try upgrading Windows Media Player to the latest version. – Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use an optionally available AV cable (EMC-7A) to connect to the video input terminal of a TV or computer and play back movies that way.

Using the Camera with a Macintosh

Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do.
When you want to do this:
Save images to your Macintosh and view them there manually
Save images to your Macintosh automatically/Manage images
Play movies OS X
Operating System Version
OS X Installation not required. 88
OS X
Install this software:
Use iPhoto, which comes bundled with some Macintosh products.
You can playback with QuickTime, which comes bundled with your operating system.
See page:
89
87
Using the Camera with a Computer

Connecting the Camera to Your Computer and Saving Files

Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0. Operation is supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, and 10.7 (using the OS standard USB driver) only.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially available card reader to access image files directly from the camera’s memory card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1. Turn off the camera and
USB port
then use the USB cable that comes with the camera to connect it to your Macintosh.
• For details about connecting to the camera and precautions when connecting, see page 15.
USB cable
(included with camera)
2. Turn on the camera.
The camera’s back lamp will light green or amber at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using.
• The first time you connect the camera to your Macintosh with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.
• Charging continues even if the camera is turned on.
3. Double-click the camera’s drive icon.
4. Drag the “DCIM” folder to the folder to which you want to copy it.
88
Using the Camera with a Computer
5. After the copy operation is complete, drag the drive icon to Trash.
6. On the camera, press [ON/OFF] (Power) to turn off the camera. After
checking to make sure that the back lamp is unlit or lit red, disconnect the USB cable.
. To view copied images
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
4. Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 93.
• An image that was rotated on the camera will be displayed on your Macintosh screen in its original (unrotated) orientation.

Playing a Movie

You can use QuickTime, which comes bundled with your operating system, to play back movies on a Macintosh. To play back a movie, first copy it to your Macintosh and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back movies recorded with this camera on a computer.
Operating System : Mac OS X 10.3.9 or higher Required Software: QuickTime 7 or higher
• The above are recommended system environments. Configuring one of these environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of movies.
89
Using the Camera with a Computer
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you experience problems, try the following.
– Change the movie image quality setting to “STD”. – Upgrade to the latest version of QuickTime. – Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use an optionally available AV cable (EMC-7A) to connect to the video input terminal of a TV or Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.

Using an Eye-Fi Wireless SD Memory Card to Transfer Images (Eye-Fi)

Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it possible to transfer image data automatically to a computer via wireless LAN.
1. Configure LAN access point, transfer destination and other settings for
the Eye-Fi card in accordance with the instructions that come with the Eye-Fi card.
2. After configuring settings, load the Eye-Fi card into the camera and
record.
Images you record are sent by wireless LAN to your computer, etc.
• For full details, see the user documentation that comes with the Eye-Fi card.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi Manager install files to your computer. Do this before formatting the card.
90
Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 95) when on an aircraft or in any other location where use of wireless communication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator to appear on the monitor screen. Its transparent or not transparent appearance indicates the communication status as shown below.
Transparent
Access point cannot be found or no transferable image data exists.
Not transparent Image transfer in progress
Flashing Searching for access points
• A communication icon will appear on the monitor screen while image data transfer is in progress.
• The camera’s Auto Power Off (page 100) function is disabled while image data transfer is in progress.
• A confirmation message will appear on the monitor screen if you try to turn off the camera while image data transfer is in progress. Follow the instructions in the messages (page 122).
• Transfer of a large number of images can take some time to complete.
• Depending on the type of Eye-Fi card you are using and its settings, images on the Eye-Fi card may be deleted following image data transfer.
• When recording a movie to an Eye-Fi card, it can take too much time to record data, which can result in breaks in the image and/or audio.
• Proper Eye-Fi card data communication may not be possible due to camera settings, battery level, or operating conditions.
91
Using the Camera with a Computer

Files and Folders

The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder Structure” (page 93).
Name and Maximum Number Allowed Example
File
Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The extension on the file name depends on the file type.
Folders
Folders are named from 100CASIO to 999CASIO. There can be up to 900 folders in memory.
• The BEST SHOT (page 49) includes a sample scene that optimizes settings for auction site images. Depending on your camera model, the sample scene is named either “For eBay” or “Auction”. – Images recorded with the eBay scene are
stored in a folder named “100_EBAY”.
– Images recorded with the Auction scene are
stored in a folder named “100_AUCT”.
• BEST SHOT also has a scene named “For YouTube” that optimizes movie settings for recording movies for upload to YouTube. Images recorded with the YouTube scene are stored in a folder named “100YOUTB”.
• You can view folder and file names on your computer. For details about how file names are displayed on the camera’s monitor screen, see page 10.
• The total number of folders and files allowed depends on the image size and quality, and capacity of the memory card being used for storage.
26th file name:
CIMG0026.JPG
Extension
Serial number (4 digits)
100th folder name:
100CASIO
Serial number (3 digits)
92
Using the Camera with a Computer

Memory Card Data

The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view them.
. Memory Folder Structure
DCIM
100CASIO CIMG0001.JPG CIMG0002.AVI CIMG0003.WAV CIMG0004.JPG CIMG0004.WAV
101CASIO 102CASIO
MISC
AUTPRINT.MRK
* Other folders are created when the following BEST SHOT scenes are used for
recording: “For eBay” or “Auction” (scene name depends on camera model), or “For YouTube”. The following shows the name of the folder created for each scene.
• eBay scene: 100_EBAY
• Auction scene: 100_AUCT
• YouTube scene: 100YOUTB
DCIM Folder Recording Folder
*
Image File Movie File Audio File Audio Snapshot Image File Audio Snapshot Audio File
Recording Folder
*
Recording Folder
*
DPOF File Folder DPOF File
93
Using the Camera with a Computer
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM folder and all of its contents. A good way to keep track of multiple DCIM copies of the DCIM folders is to change its name to a date or something similar after you copy it to your computer. If you later decided to return the folder to the camera, however, be sure to change its name back to DCIM. The camera is designed to recognize only a root file with the name DCIM. Note the camera also will not be able to recognize the folders inside the DCIM folder unless they have the names they originally had when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure” shown on page 93 in order for the camera to be able to recognize them correctly.
94
Using the Camera with a Computer

Other Settings (Set Up)

This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode.
See the following for more information.
– REC Menu (page 52) – PLAY Menu (page 71)

Turning off Eye-Fi Card Communication (Eye-Fi)

Procedure
[SET] * MENU * “Set Up” Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 90).

Configuring Camera Sound Settings (Sounds)

Procedure
[SET] * MENU * “Set Up” Tab * Sounds
Startup
Half Shutter
Shutter
Operation
Operation
Play
• Setting a volume level of 0 mutes output.
Specifies the startup sound. Sound 1 - 5: Built-in sounds (1 through 5) Off: Sound off
Specifies the sound volume. This setting is also used as the audio level during video output (page 69).
Specifies the volume of movie and Audio Snapshot audio output. This setting is also used as the audio level during video output (page 69).
95
Other Settings (Set Up)

Configuring a Startup Image (Startup)

Procedure
[SET] * MENU * “Set Up” Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] (PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the startup image, the audio will not play at startup.
• Formatting built-in memory (page 102) will delete the current startup image setting.

Specifying the File Name Serial Number Generation Rule (File No.)

Procedure
[SET] * MENU * “Set Up” Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 92).
Tells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or
Continue
Reset
if a blank memory card is loaded. If a memory card is loaded and that card already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory card is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1.
96
Other Settings (Set Up)

Configuring World Time Settings (World Time)

Procedure
[SET] * MENU * “Set Up” Tab * World Time
You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe.
1. Use [8] and [2] to select “Destination” and then press [6].
• To change the geographic area and city for the time where you normally use the camera, select “Home”.
2. Use [8] and [2] to select “City” and then press [6].
• To change the “Destination” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months.
3. Use [8], [2], [4], and [6] to select the geographic area you want and
then press [SET].
4. Use [8] and [2] to select the city you want and then press [SET].
5. Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isn’t, select “Home” on the screen in step 1 and configure the Home City, date, and time settings as required (page 98).
97
Other Settings (Set Up)

Time Stamping Snapshots (Timestamp)

Procedure
[SET] * MENU * “Set Up” Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or deleted.
Example: July, 10, 2015, 1:25 p.m.
Date 2015/7/10
Date&Time 2015/7/10 1:25pm
Off No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 81).
• Digital zoom is disabled while time stamping is turned on.
• Time stamping is disabled when certain BEST SHOT scenes are being used.

Setting the Camera’s Clock (Adjust)

Procedure
[SET] * MENU * “Set Up” Tab * Adjust
[8] [2] Change the setting at the cursor location
[4] [6] Move the cursor between settings
[0] (Movie) Toggles between 12-hour and 24-hour format
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 97) before setting the time and date. If you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 97) will be wrong.
98
Other Settings (Set Up)

Specifying the Date Style (Date Style)

Procedure
[SET] * MENU * “Set Up” Tab * Date Style
You can select from among three different styles for the date.
Example: July, 10, 2015
YY/MM/DD 15/7/10
DD/MM/YY 10/7/15
MM/DD/YY 7/10/15

Specifying the Display Language (Language)

Procedure
[SET] * MENU * “Set Up” Tab * Language
. Specify the display language you want.
Select the tab on the right.
1
Select “Language”.
2
Select the language you want.
3
• Camera models sold in certain geographic areas may not support display language selection.
1
23

Configuring Sleep State Settings (Sleep)

Procedure
[SET] * MENU * “Set Up” Tab * Sleep
This feature turns off the monitor screen and lights the back lamp (green) whenever no camera operation is performed for a preset period of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is selected.)
• Sleep is disabled under any of the following conditions. – In the PLAY mode – While the camera is connected to a computer or other device – During “O Tracking” – During Voice Recording playback or recording – During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
99
Other Settings (Set Up)

Configuring Auto Power Settings (Auto Power Off)

Procedure
[SET] * MENU * “Set Up” Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions. – While the camera is connected to a computer or other device – During a slideshow – During “O Tracking” – During Voice Recording playback or recording – During movie recording and playback
Configuring [r] Setting (REC)
Procedure
[SET] * MENU * “Set Up” Tab * REC
Power On Camera turns on whenever [r] (REC) is pressed.
Power On/Off Camera turns on or off whenever [r] (REC) is pressed.
Disable
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC mode.
• When “Power On” or “Power On/Off” is enabled, you can turn on the camera by holding down [
Camera does not turn on or off whenever [ pressed.
r] (REC) until the back lamp lights green momentarily.
r] (REC) is
100
Other Settings (Set Up)
Loading...