Casio EXILIM EX-Z700 User Guide

Digital Camera

EX-Z700

User’s Guide

Thank you for purchasing this CASIO product.

• Before using it, be sure to read the precautions contained in this User’s Guide.

• Keep the User’s Guide in a safe place for future reference.

• For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/.

K810FCM1DMX

INTRODUCTION

Unpacking

Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible.

Camera

CD-ROM AV Cable

Special AC Adaptor

(AD-C52S or AD-C52G)

Rechargeable Lithium Ion

Battery (NP-40)

USB Cable Basic Reference

* The shape of the AC

power cord plug varies according to country or geographic area.

AC Power Cord

USB Cradle

(CA-29)

Strap

INTRODUCTION

2 INTRODUCTION

Unpacking .................................................................... 2

Features ....................................................................... 9

Precautions ................................................................ 12

18 QUICK START GUIDE

First, charge the battery! ............................................ 18

To configure display language and clock settings ..... 19

To record an image .................................................... 20

To view a recorded image .......................................... 21

To delete an image ..................................................... 21

22 GETTING READY

About This Manual ..................................................... 22

General Guide ............................................................ 23

Camera 23 USB Cradle 25

Monitor Screen Contents ........................................... 26

REC Mode 26 PLAY Mode 28 Changing the Contents of the Monitor Screen 30

Attaching the Strap .................................................... 31

Power Requirements ................................................. 32

Loading the Rechargeable Battery 32 To charge the battery 33 To replace the battery 37 Power Supply Precautions 38 Turning the Camera On and Off 42 Configuring Power Saving Settings 43

Using the On-screen Menus ...................................... 45

Configuring Display Language and Clock Settings ... 47

To configure display language and clock settings 48

51 BASIC IMAGE RECORDING

Recording an Image ................................................... 51

Aiming the Camera 51 Recording an Image 52

Using Zoom ................................................................ 58

Optical Zoom 58 Digital Zoom 60

Using the Flash .......................................................... 63

Flash Unit Status 65 Changing the Flash Intensity Setting 66 Using Flash Assist 66

Using the Self-timer ................................................... 68

Specifying Image Size ............................................... 71

Specifying Image Quality ........................................... 72

INTRODUCTION

74 OTHER RECORDING FUNCTIONS

Selecting the Focus Mode ......................................... 74

Using Auto Focus 75 Using the Macro Mode 78 Using Pan Focus 79 Using the Infinity Mode 80 Using Manual Focus 80 Using Focus Lock 82

Exposure Compensation (EV Shift) ........................... 83

Adjusting White Balance ............................................ 84

Configuring the White Balance Setting Manually 86

Using Continuous Shutter .......................................... 87

Normal-speed continuous shutter 88 High-speed continuous shutter 88 Flash continuous shutter 89 Continuous Shutter Precautions 89

Using the BEST SHOT Mode .................................... 90

Displaying Sample Scenes Individually 92 Creating Your Own BEST SHOT Setup 93 To delete a BEST SHOT user setup 94

Reducing the Effects of

Hand or Subject Movement ....................................... 95

Shooting with High Sensitivity ................................... 96

Recording Images of Business Cards and

Documents (Business Shot) ...................................... 97

Before recording with Business Shot 98 To use Business Shot 98

Restoring an Old Photograph .................................... 99

Before trying to restore an old photograph 99 To restore an old photograph 100

Recording Snapshots into a Multi-image Layout

(Layout Shots) .......................................................... 102

Auto Tracking a Moving Subject (Auto Framing)..... 104

Recording a Movie ................................................... 105

Specifying Movie Image Quality 105 Recording a Movie 106

Recording Audio ....................................................... 108

Adding Audio to a Snapshot 108 Recording Your Voice 110

Using the Histogram ................................................. 112

REC Mode Camera Settings .................................... 114

Assigning Functions to the [왗] and [왘] Keys 115 Turning the On-screen Grid On and Off 116 Turning Image Review On and Off 116 Using Icon Help 117 Specifying Power On Default Settings 118 Specifying ISO Sensitivity 120 Selecting the Metering Mode 121 Using the Filter Function 122 Specifying Outline Sharpness 123 Specifying Color Saturation 123 Specifying Contrast 124 Date Stamping Snapshots 124 Resetting the Camera 125

INTRODUCTION

126 PLAYBACK

Basic Playback Operation ........................................ 126

Playing an Audio Snapshot 127

Zooming the Display Image ..................................... 128

Resizing an Image ................................................... 129

Cropping an Image................................................... 130

Keystone Correction ................................................ 132

Using Color Restoration to Correct

the Color of an Old Photograph ............................... 133

Playing and Editing a Movie .................................... 135

Playing a Movie 135 Editing a Movie 136 Capturing a Still Image from a Movie

(MOTION PRINT) 140

Displaying the 9-image View ................................... 141

Displaying the Calendar Screen .............................. 142

Playing a Slideshow ................................................. 143

Using the Photo Stand Feature 146

Rotating the Display Image ...................................... 147

Adding Audio to a Snapshot .................................... 148

To re-record audio 149

Playing Back a Voice Recording File....................... 150

Displaying Camera Images on a TV Screen ........... 151

Selecting the Video Output System 153

154 DELETING FILES

Deleting a Single File ............................................... 154

Deleting All Files ...................................................... 155

156 FILE MANAGEMENT

Folders ..................................................................... 156

Memory Folders and Files 156

Protecting Files ........................................................ 157

To protect a single file 157 To protect all files in memory 158

Using the FAVORITE Folder .................................... 158

To copy a file to the FAVORITE folder 158 To display a file in the FAVORITE folder 160 To delete a file from the FAVORITE folder 161 To delete all files from the FAVORITE folder 161

INTRODUCTION

162 OTHER SETTINGS

Configuring Sound Settings ..................................... 162

To configure sound settings 162 To set the confirmation tone volume level 162 To set the audio volume level for movie and

audio snapshot playback 163

Specifying an Image for the Startup Screen ........... 163

Specifying the File Name Serial Number

Generation Method .................................................. 164

Setting the Clock ...................................................... 165

To select your Home Time zone 165 To set the current time and date 166 Changing the Date Format 166

Using World Time ..................................................... 167

To display the World Time screen 167 To configure World Time settings 167

Editing the Date and Time of an Image ................... 168

Changing the Display Language ............................. 169

Changing the Brightness of the Monitor Screen ..... 170

Changing the USB Port Protocol ............................. 171

Configuring [ ] (REC) and

[ ] (PLAY) Power On/Off Functions ..................... 172

Formatting Built-in Memory ...................................... 173

174 USING A MEMORY CARD

Using a Memory Card .............................................. 175

To insert a memory card into the camera 175 To replace the memory card 176 Formatting a Memory Card 177

Copying Files ........................................................... 178

To copy all the files in built-in memory to

a memory card 179

To copy a specific file from a memory card to

built-in memory 180

181 PRINTING IMAGES

DPOF ........................................................................ 182

To configure print settings for a single image 183 To configure print settings for all images 184

Using PictBridge or USB DIRECT-PRINT ............... 186

Date Printing 189

PRINT Image Matching III ............................................ 191

Exif Print ................................................................... 191

INTRODUCTION

192 VIEWING IMAGES ON A COMPUTER

Using the Camera with a Windows Computer ........ 192

Using the Camera with a Macintosh Computer ....... 199

Using a Memory Card to Transfer Images to

a Computer ............................................................... 203

Memory Data ............................................................ 204

DCF Protocol 204 Memory Folder Structure 205 Image Files Supported by the Camera 206

208 USING THE CAMERA WITH A COMPUTER

Using the Camera with a Windows Computer ........ 208

Selecting the Software You Need 208 Computer System Requirements 210 Managing Images on a PC 211 Retouching, Reorienting, and Printing a Snapshot 214 Playing a Movie 215 Transferring Images to the Camera 216 Viewing User Documentation (PDF Files) 220 User Registration 221 Exiting the Menu Application 221

Using the Camera with a Macintosh Computer ....... 222

Selecting the Software You Need 222 Computer System Requirements 223 Managing Images on a Macintosh 224 Playing a Movie 225 Viewing User Documentation (PDF Files) 225 To register as a camera user 226

227 APPENDIX

Menu Reference ....................................................... 227

Indicator Lamp Reference ....................................... 230

Troubleshooting Guide ............................................. 233

If you have problems installing the USB driver... 238 Display Messages 239

Specifications ........................................................... 241

INTRODUCTION

IMPORTANT!

• The contents of this manual are subject to change without notice.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise due to the use or malfunction of the EX-Z700.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader, Photohands and/or Photo Transport.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss.

• Note that the example screens and product illustrations shown in this User’s Guide may differ somewhat by the screens and configuration of the actual camera.

• SDHC Logo is a trademark.

• Windows, Internet Explorer, Windows Media, and DirectX are registered trademarks of Microsoft Corporation.

• Macintosh and QuickTime are trademarks of Apple Computer, Inc.

•

MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA).

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

• Other company, product and service names used herein may also be trademarks or service marks of others.

• Photo Loader, Photohands and Photo Transport are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD.

INTRODUCTION

■ LCD Panel

The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of

99.99%. This means that less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on).

■ Copyright Restrictions

Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts. Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts.

Features

• 7.2 million effective pixels

The CCD provides 7.41 million total pixels for images of outstanding resolution and detail.

• 2.7-inch TFT color LCD monitor screen

• 8.3MB built-in memory

Use built-in memory for testing the camera or to record images in emergencies when your memory card is full or unavailable.

• Bundled with a USB Cradle

The bundled USB cradle can be used to charge the camera’s battery (page 33), to view images on a TV screen (page 151), and to transfer images to a computer (page 192). A Photo Stand feature lets you view images while the camera is on the cradle (page 146).

• REC mode or PLAY mode power up (page 42)

Press [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use.

• AF assist light (page 55)

Improves auto focus accuracy when shooting under dim lighting.

• 12X zoom (page 58)

3X optical zoom, 4X digital zoom (Image Size: 7M (3072 × 2304 pixels))

INTRODUCTION

• Flash Assist (page 66)

This feature compensates when flash intensity is not strong enough, so images are better illuminated.

• Triple Self-timer (page 68)

The self-timer can be set up to repeat three times, automatically.

• Auto Macro (page 75)

Auto Macro automatically switches to the macro mode when the distance between the camera and subject it shorter than the Auto Focus range.

• Quick Shutter (page 76)

When you press the shutter button all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed. This helps to avoid missing a special moment while you wait for the camera to Auto Focus.

• Auto Focus Area Selection (page 77)

When “ Multi” is selected for the Auto Focus area, the camera takes simultaneous meter readings at nine different points and automatically selects the best one.

• Three continuous shutter modes (page 87)

In addition to normal-speed continuous shutter, you can also select high-speed continuous shutter or flash continuous shutter.

• BEST SHOT (page 90)

Simply select one of a collection of built-in sample scenes and the camera sets up for the scene you selected. It’s the simple way to set up for beautiful snapshots quickly and easily. New BEST SHOT sample scenes include setups for Layout Shots and Auto Framing. A [BS] (BEST SHOT) button provides direct access to BEST SHOT sample scenes.

• Business Shot (page 97)

Business Shot automatically corrects rectangular shapes when recording the image of a business card, document, whiteboard, or similar subjects from an angle.

• Restoring an Old Photograph (page 99)

You can use the procedure in this section to restore an old, faded photograph with the color provided by modern digital camera technology.

• Movie recording with audio (page 105)

VGA size, 30 fps, Motion JPEG format

• Audio Snapshot mode (page 108)

Use this mode to record snapshots that also include audio.

• Voice Recording (page 110)

Quick and easy recording of voice input.

INTRODUCTION

• Real-time RGB histogram (page 112)

An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness, which makes shooting under difficult lighting conditions easier than ever before.

• Keystone Correction (page 132)

A simple operation corrects for keystoning, which occurs when you record the image of a blackboard or poster from an angle.

• Color Correction (page 133)

Simply record the image of an old photograph to restore its colors.

• MOTION PRINT (page 140)

Capture frames from a movie and create still images that are suitable for printing.

• Calendar screen (page 142)

A simple operation displays a full-month calendar on the camera’s monitor screen. Each day of the full-month calendar shows a thumbnail of the first file recorded for that date, which helps to make searching for a particular file quicker and easier.

• World Time (page 167)

A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones.

• Support for SD memory cards, SDHC memory cards and MMC (MultiMedia Cards) for memory expansion (page 174)

• Digital Print Order Format (DPOF) (page 182)

Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services.

• PictBridge and USB DIRECT-PRINT support (page 186)

Connect directly to a PictBridge or USB DIRECT-PRINT compatible printer and you can print images without going through a computer.

• PRINT Image Matching III Compatible (page 191)

Images include PRINT Image Matching setting and other camera setup information). A printer that supports PRINT Image Matching adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them.

• DCF Data Storage (page 204)

DCF (Design rule for Camera File system) data storage protocol provides image compatibility between the digital camera and printers.

III

data (mode

III

reads this data and

INTRODUCTION

• Bundled with Photo Loader and Photohands (pages 211, 214, 224)

Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy.

• Bundled with Photo Transport (page 216)

Photo Transport let you transfer images saved on your computer or displayed on your computer screen (website data, maps, etc.) to your camera. Once stored in camera memory, images can be viewed on its monitor screen.

Precautions

■ General Precautions

Be sure to observe the following important precautions whenever using the EX-Z700.

All references in this manual to “camera” refer to the CASIO EX-Z700 Digital Camera.

• Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the risk of serious accident.

• Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center.

• Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately.

• Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver’s vision and create the risk of accident.

INTRODUCTION

• Never fire the flash while it is too close to the subject’s eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject.

• Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc.

• Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock.

• Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance.

• Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera.

• Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater.

• At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the risk of fire.

• If the camera’s case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center.

• Never use the camera inside of an aircraft or in any other area where its use is prohibited. Doing so creates the risk of accident.

• Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Always keep backup copies of data by transferring them to personal computer memory.

INTRODUCTION

• Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory.

■ Test for proper operation before using the camera!

Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly.

INTRODUCTION

■ Data Error Precautions

• Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in file memory.

— While the camera is performing an operation,

removing the battery or memory card from the camera, or placing the camera onto or removing it from the USB cradle

— While the operation lamp is flashing green after turning

off the camera, removing the memory card from the camera or placing the camera onto or removing it from the USB cradle

— Disconnecting the USB cable, removing the camera

from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication

operation is being performed — Low battery power — Other abnormal operations

Any of the above conditions can cause an error message to appear on the monitor screen (page 239). Follow the instructions provided by the message to eliminate the cause of the error.

■ Operating conditions

• This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F).

• Do not use or keep the camera in the following areas.

— In areas subject to direct sunlight — In areas subject to high humidity or dust — Near air conditioners, heaters, or other areas subject

to temperature extremes

— Inside of a closed vehicle, especially one parked in the

sun

— In areas subject to strong vibration

INTRODUCTION

■ Condensation

• When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation.

• To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery cover open for a few hours.

■ Power Supply

• Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.

• This camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied power by the battery and/or the USB cradle for about 30 hours. Be sure to reconfigure these settings after power is interrupted (page 165).

■ Lens

• Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction.

• You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lens, and does not indicate malfunction of the camera.

INTRODUCTION

■ Caring for your camera

• Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth.

• Fingerprints, dirt, and other foreign matter on the flash can interfere with proper operation of the camera. Avoid touching the flash. If the flash becomes dirty, wipe it clean with a soft, dry cloth.

• If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth.

■ Monitor Screen Images

• The images that normally appear on the monitor screen during image playback are smaller than normal, and so you cannot see all of the detail of the actual image. Your camera has an image zoom feature (page 128) which you can use to enlarge the monitor screen image. You can use this feature for on-the-spot checks of important images.

■ Other

• The camera may become slightly warm during use. This does not indicate malfunction.

QUICK START GUIDE

First, charge the battery!

Load the battery into the camera (page 32).

Stopper

Place the camera onto the USB cradle to charge the battery (page 33).

• It takes about 180 minutes to achieve a full charge.

AC adaptor

AC power cord

USB cradle

[CHARGE] lamp Charging: Lights red Charging Complete: Lights green

QUICK START GUIDE

To configure display language and clock settings

• Be sure to configure the following settings before using the camera to record images. See page 47 for details.

• If you make a mistake when setting the language or clock with the following procedure, you will need to use the camera’s menu to individually change the language (page 169) or clock (page

165) settings.

2, 3, 4, 5, 6, 7, 8, 9

DISP

[왖]

[왗][왘]

[왔]

SET

[SET]

Press the power button to turn on the camera.

Use [왖], [왔], [왗], and [왘] to select the language you want.

Press [SET] to register the language setting.

Use [왖], [왔], [왗], and [왘] to select the geographical area you want, and then press [SET].

Use [왖] and [왔] to select the city you want, and then press [SET].

Use [왖] and [왔] to select the summer time (DST) setting you want, and then press [SET].

Use [왖] and [왔] to select the date format setting you want, and then press [SET].

Set the date and the time.

Press [SET] to register the clock settings and exit the setting screen.

QUICK START GUIDE

To record an image

Auto recording icon

See page 51 for details.

Press [ ] (REC).

• This enters the REC (recording) mode.

0606/

Focus frame

1212/

Point the camera at the subject, use the monitor screen to compose the image, and then press the shutter button half way.

• When the camera finishes its Auto Focus operation, the focus frame will turn green and the operation lamp lights green.

Holding the camera still, gently press the shutter button all the way down.

Operation lamp

The camera’s built in memory can record only a few images and is intended for testing the camera or for emergency purposes only. Using a memory card provides more capacity you can use to store more images, high-quality and large-size images, and longer movies. In order to be able to use a commercially available memory card, you first need to format it using the camera’s formatting procedure. For details about formatting a memory card, see page 177.

QUICK START GUIDE

To view a recorded image

See page 126 for details.

Press [ ] (PLAY).

• This enters the PLAY (playback) mode.

Use [왗] and [왘] to scroll through the images.

To delete an image

See page 154 for details.

2, 3, 4, 5

Press [ ] (PLAY).

Press [왔] ( ).

Use [왗] and [왘] to display the image you want to delete.

Use [왖] and [왔] to select “Delete”.

• To exit the image delete operation without deleting anything, select “Cancel”.

Press [SET] to delete the image.

GETTING READY

This section contains information about things you need to know about and do before trying to use the camera.

About This Manual

This section contains information about the conventions used in this manual.

■ Terminology

The following table defines the terminology used in this manual.

This term as used in this manual:

“camera”

“file memory”

“battery”

“charger”

Means this:

The CASIO EX-Z700 Digital Camera

The location where the camera is currently storing images you record (page 52)

The NP-40 Rechargeable Lithium Ion Battery

The optionally available CASIO BC-30L charger

This term as used in this manual:

“digital noise” Tiny flecks or “snow” in a

Means this:

recorded image or on the monitor screen, which makes the image look grainy.

■ Button Operations

Button operations are indicated by the button name inside of brackets ([ ]).

■ On-screen Text

On-screen text is always enclosed by double quotation marks (“ ”).

■ Supplementary Information

• IMPORTANT! indicates very important information you need to know in order to use the camera correctly.

• NOTE indicates information that is useful when operating the camera.

GETTING READY

■ File Memory

The term “file memory” in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations.

• The camera’s built-in memory

• An SD memory card or SDHC memory card loaded in the camera

• A MultiMediaCard loaded in the camera

For more information about how the camera stores images, see page 204.

General Guide

The following illustrations show the names of each component, button, and switch on the camera.

Camera

■ Front

1 Zoom controller 2 Shutter button 3 Power button

4 Microphone 5 AF assist light/

self-timer lamp

6 Lens 7 Flash

GETTING READY

■ Back

8 Operation lamp 9 [ ] (PLAY mode) button 0 [ ] (REC mode) button A [BS] (BEST SHOT) button B Strap ring C [왖][왔][왗][왘] D [SET] button E [MENU] button F Monitor Screen

A B

[왖]

[왗][왘]

[왔]

DISP

SET

■ Bottom

G Stopper H Memory card slot I Battery compartment J Battery cover K Tripod screw hole

* Use this hole when attaching to a tripod.

L Connector M Speaker

[SET]

IJKLM

GETTING READY

USB Cradle

Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks.

• Battery charging (page 33)

• Viewing of images using the Photo Stand slideshow

feature (page 146).

• TV connectability for viewing of images on a television screen (page 151).

• Direct connection to a printer for printing (page 186)

• Automatic transfer of images to a computer (page 192)

IMPORTANT!

• Use only the USB cradle (CA-29) that comes with the camera. Other USB cradles are not supported.

■ Front

■ Back

1 Camera connector 2 [USB] lamp 3 [USB] button 4 [PHOTO] button 5 [CHARGE] lamp

6 [DC IN 5.3V]

(AC adaptor connector)

7 [AV OUT]

(AV output port)

8 [ ] (USB port)

GETTING READY

Monitor Screen Contents

The monitor screen uses various indicators and icons to keep you informed of the camera’s status.

• Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen contents actually produced on the camera.

REC Mode

■ Screen Indicators

2 467

J I

1 Flash mode indicator

A B C

(page 63)

Auto Flash

Flash Off

Flash On

Soft Flash

Red-eye reduction

• appears momentarily when you select Auto Flash as the flash mode, and then disappears.

• If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter button is pressed half way.

2 Focus mode indicator

(page 74)

Auto Focus

Macro

Pan Focus

Infinity

Manual Focus

• When you select Auto Focus with Key Customize (page

115), appears only briefly, and then disappears from the display.

3 White balance indicator

(page 84)

Auto

AWB

Daylight

Overcast

Shade

Day White Fluorescent

Daylight Fluorescent

Tungsten

Manual

• When you select Auto with Key Customize (page 115),

appears only briefly,

AWB

and then disappears from the display.

4 Continuous Shutter

mode (page 87)

None Single shot

Normal-speed Continuous Shutter

High-speed Continuous Shutter

Flash Continuous Shutter

5 Self-timer (page 68)

None Self-timer Off

Self-timer 10 sec

Self-timer 2 sec

Triple self-timer

6 Recording types

Auto recording

BEST SHOT

Movie

Voice Recording

GETTING READY

7 Metering mode indicator

(page 121)

None Multi

Center Weighted

Spot

8 • Snapshots: Image size

(page 71)

9 • Snapshots: Memory capacity

(pages 54, 241)

• Movies: Remaining recording time (page 106)

0 • Snapshots: Image quality

(page 72)

F : Fine N : Normal E : Economy

• Movies: Image quality (page 105)

HQ : High Quality NORMAL : Normal LP : Long Play

A ISO sensitivity

(page 120)

B Aperture value (page 54)

C Shutter speed value

(page 54)

D Date and time

(page 165)

E Timestamp indicator

(page 124)

F EV value (page 83)

G Battery capacity

(page 36)

H Histogram (page 112)

I Anti Shake indicator

(page 95)

J Focus frame

(page 53)

• Focusing complete: Green

• Focusing failed: Red

NOTE

• An out of range aperture, shutter speed, or ISO sensitivity setting causes the corresponding monitor screen value to turn amber.

• Changing the setting of any one of the following functions will cause Icon Help (page 117) text to appear on the monitor screen. You can turn off Icon Help if you want. Flash mode, Focus mode, White balance, Self-timer, Recording type, EV shift

GETTING READY

K Digital zoom indicator (page 60)

L Zoom indicator (page 60)

• Left side indicates optical zoom.

• Right side indicates digital zoom.

PLAY Mode

1 PLAY mode file type

Snapshot

Movie

Audio Snapshot

Voice Recording

2 Image protection

indicator (page 157)

12 3

0AB

3 Folder name/File name

(page 156)

Example : When a file named CIMG0023.JPG is stored in a folder named 100CASIO

100-0023

Folder name File name

4 • Snapshots: Image quality

(page 72) F : Fine N : Normal E : Economy

• Movies: Recording time (page 106)

4 5

6 7 8 9

GETTING READY

5 • Snapshots: Image Size

(page 71)

• Movies: Image quality (page 105) HQ : High Quality NORMAL : Normal LP : Long Play

6 ISO sensitivity (page 120)

7 Aperture value

(page 54)

8 Shutter speed value

(page 54)

9 Date and time

(page 165)

0 Metering mode indicator

(page 121)

Multi

Center Weighted

Spot

A White balance indicator

(page 84)

Auto

AWB

Daylight

Overcast

Shade

Day White Fluorescent

Daylight Fluorescent

Tungsten

Manual

B Flash mode indicator

(page 63)

Flash On

Flash Off

Soft Flash

Red-eye reduction

C Recording types

Auto recording

BEST SHOT

D Battery capacity

(page 36)

E Histogram (page 112)

F EV value (page 83)

IMPORTANT!

• Some information may not display properly if you display an image that was recorded using a different digital camera model.

GETTING READY

Changing the Contents of the Monitor Screen

Each press of [왖] (DISP) changes the contents of the monitor screen as shown below.

■ REC Mode

Indicators on Histogram on

Indicators off

■ PLAY Mode

Indicators on Histogram/Details on

Indicators off

+ 217 hidden pages