Casio EXILIM EX-Z500 User Guide

Digital Camera
EX-Z500
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/.
E
K806FCM1DMX

INTRODUCTION

INTRODUCTION

Unpacking

Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible.
Camera
CD-ROM AV Cable
Rechargeable Lithium Ion
Battery (NP-40)
USB Cable Basic Reference
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
* The shape of the AC
power cord plug varies according to country or geographic area.
Special AC Adaptor (Inlet Type)
(AD-C52G)
AC Power Cord
*
USB Cradle
(CA-29)
○○○○○
Special AC Adaptor (Plug-in Type)
2
Strap
(AD-C52J)
B
INTRODUCTION

Contents

2 INTRODUCTION
Unpacking .................................................................... 2
Features ....................................................................... 9
Precautions ................................................................ 12
18 QUICK START GUIDE
First, charge the battery! ............................................ 18
To configure display language and clock settings ..... 19
To record an image .................................................... 20
To view a recorded image .......................................... 21
To delete an image ..................................................... 21
22 GETTING READY
About This Manual ..................................................... 22
General Guide ............................................................ 23
Camera 23 USB Cradle 25
Monitor Screen Contents ........................................... 26
REC Mode 26 PLAY Mode 28 Changing the Contents of the Monitor Screen 30
Attaching the Strap .................................................... 31
Power Requirements ................................................. 32
Loading the Rechargeable Battery 32 To charge the battery 33 To replace the battery 38 Power Supply Precautions 39 Turning the Camera On and Off 42 Configuring Power Saving Settings 44
Using the On-screen Menus ...................................... 45
Configuring Display Language and Clock Settings ... 48
To configure display language and clock settings 49
51 BASIC IMAGE RECORDING
Recording an Image ................................................... 51
Aiming the Camera 51 Recording an Image 52
Using Zoom ................................................................ 58
Optical Zoom 58 Digital Zoom 60
Using the Flash .......................................................... 62
Flash Unit Status 64 Changing the Flash Intensity Setting 65 Using Flash Assist 65
3
INTRODUCTION
Using the Self-timer ................................................... 67
Specifying Image Size ............................................... 70
Specifying Image Quality ........................................... 71
72 OTHER RECORDING FUNCTIONS
Selecting the Focus Mode ......................................... 72
Using Auto Focus 73 Using the Macro Mode 76 Using Pan Focus 77 Using the Infinity Mode 77 Using Manual Focus 78 Using Focus Lock 79
Exposure Compensation (EV Shift) ........................... 80
Adjusting White Balance ............................................ 82
Configuring the White Balance Setting Manually 83
Recording Consecutive Images
(Continuous Shutter Mode) ........................................ 85
Using the BEST SHOT Mode .................................... 86
Displaying Sample Scenes Individually 88 Creating Your Own BEST SHOT Setup 89 To delete a BEST SHOT user setup 90
Reducing the Effects of Hand or Subject Movement 91
Shooting with High Sensitivity ................................... 92
Recording Images of Business Cards and
Documents (Business Shot) ...................................... 93
To use Business Shot 94
Recording a Movie ..................................................... 95
Specifying Movie Image Quality 96 Recording a Movie 97
Recording Audio ......................................................... 99
Adding Audio to a Snapshot 99 Recording Your Voice 100
Using the Histogram ................................................ 102
REC Mode Camera Settings ................................... 105
Assigning Functions to the [] and [] Keys 106 Turning the On-screen Grid On and Off 107 Turning Image Review On and Off 107 Specifying Power On Default Settings 108 Specifying ISO Sensitivity 110 Selecting the Metering Mode 111 Using the Filter Function 112 Specifying Outline Sharpness 113 Specifying Color Saturation 113 Specifying Contrast 114 Resetting the Camera 114
4
INTRODUCTION
115 PLAYBACK
Basic Playback Operation .........................................115
Playing an Audio Snapshot 116
Zooming the Display Image ......................................117
Resizing an Image .................................................... 118
Cropping an Image.................................................... 119
Playing and Editing a Movie .................................... 121
Playing a Movie 121 Editing a Movie 122 Capturing a Still Image from a Movie
(MOTION PRINT) 126
Displaying the 9-image View ................................... 127
Displaying the Calendar Screen .............................. 128
Playing a Slideshow ................................................. 129
Using the Photo Stand Feature 132
Rotating the Display Image ...................................... 133
Adding Audio to a Snapshot .................................... 134
To re-record audio 135
Playing Back a Voice Recording File....................... 136
Displaying Camera Images on a TV Screen ........... 137
Selecting the Video Output System 138
140 DELETING FILES
Deleting a Single File ............................................... 140
Deleting All Files ...................................................... 141
142 FILE MANAGEMENT
Folders ..................................................................... 142
Memory Folders and Files 142
Protecting Files ........................................................ 143
To protect a single file 143 To protect all files in memory 144
Using the FAVORITE Folder .................................... 144
To copy a file to the FAVORITE folder 144 To display a file in the FAVORITE folder 146 To delete a file from the FAVORITE folder 147 To delete all files from the FAVORITE folder 147
5
INTRODUCTION
148 OTHER SETTINGS
Configuring Sound Settings ..................................... 148
To configure sound settings 148 To set the confirmation tone volume level 148 To set the audio volume level for movie and audio
snapshot playback 149
Specifying an Image for the Startup Screen ........... 149
Specifying the File Name Serial Number
Generation Method .................................................. 150
Setting the Clock ...................................................... 151
To select your Home Time zone 151 To set the current time and date 152 Changing the Date Format 152
Using World Time ..................................................... 153
To display the World Time screen 153 To configure World Time settings 153
Changing the Display Language ............................. 154
Changing the Brightness of the Monitor Screen ..... 155
Changing the USB Port Protocol ............................. 155
Configuring [ ] (REC) and [ ] (PLAY)
Power On/Off Functions ........................................... 156
Formatting Built-in Memory ...................................... 157
159 USING A MEMORY CARD
Using a Memory Card .............................................. 160
To insert a memory card into the camera 160 To replace the memory card 161 Formatting a Memory Card 162
Copying Files ........................................................... 163
To copy all the files in built-in memory to a
memory card 164
To copy a specific file from a memory card to
built-in memory 164
166 PRINTING IMAGES
DPOF ........................................................................ 167
To configure print settings for a single image 168 To configure print settings for all images 169
Using PictBridge or USB DIRECT-PRINT ............... 170
Date Printing 174
PRINT Image Matching III ............................................ 175
Exif Print ................................................................... 175
6
INTRODUCTION
176 VIEWING IMAGES ON A COMPUTER
Using the Camera with a Windows Computer ........ 176
Using the Camera with a Macintosh Computer ....... 184
Using a Memory Card to Transfer Images to a
Computer .................................................................. 188
Memory Data ............................................................ 189
DCF Protocol 189 Memory Folder Structure 190 Image Files Supported by the Camera 191
193 USING THE CAMERA WITH A COMPUTER
Using the Camera with a Windows Computer ........ 193
About the bundled CD-ROM 193 Computer System Requirements 195 Managing Images on a PC 196 Retouching, Reorienting, and Printing a Snapshot 199 Playing a Movie 201 Viewing User Documentation (PDF Files) 202 User Registration 202 Exiting the Menu Application 202
Using the Camera with a Macintosh Computer ....... 203
About the bundled CD-ROM 203 Computer System Requirements 204 Managing Images on a Macintosh 205 Playing a Movie 206 Viewing User Documentation (PDF Files) 206 To register as a camera user 207
208 APPENDIX
Menu Reference ....................................................... 208
Indicator Lamp Reference ........................................ 211
Troubleshooting Guide ............................................. 214
If you have problems installing the USB driver... 219 Display Messages 220
Specifications ........................................................... 222
7
INTRODUCTION
IMPORTANT!
The contents of this manual are subject to change without notice.
CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual.
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise due to the use or malfunction of the EX-Z500.
CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader and/or Photohands.
CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss.
Note that the example screens and product illustrations shown in this Users Guide may differ somewhat by the screens and configuration of the actual camera.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, Windows Media, and DirectX are registered trademarks of Microsoft Corporation.
• Macintosh and QuickTime are trademarks of Apple Computer, Inc.
MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA).
• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
• Other company, product and service names used herein may also be trademarks or service marks of others.
• Photo Loader and Photohands are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD.
8
INTRODUCTION
LCD Panel
The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of
99.99%. This means that less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on).
Copyright Restrictions
Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts. Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts.

Features

• 5.0 million effective pixels
The CCD provides 5.25 million total pixels for images of outstanding resolution and detail.
• 2.7-inch TFT color LCD monitor screen
• 8.7MB built-in memory
Images can be recorded without using a memory card.
• Bundled with a USB Cradle
The bundled USB cradle can be used to charge the cameras battery (page 33), to view images on a TV screen (page 137), and to transfer images to a computer (page 176). A Photo Stand feature lets you view images while the camera is on the cradle (page 132).
• REC mode or PLAY mode power up (page 156)
Press [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use.
• AF assist light (page 65)
Improves auto focus accuracy when shooting under dim lighting.
• 12X zoom (page 58)
3X optical zoom, 4X digital zoom
9
INTRODUCTION
• Triple Self-timer (page 67)
The self-timer can be set up to repeat three times, automatically.
• Quick Shutter (page 74)
When you press the shutter button all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed. This helps to avoid missing a special moment while you wait for the camera to Auto Focus.
• Auto Focus Area Selection (page 75)
When Multi is selected for the Auto Focus area, the camera takes simultaneous meter readings at nine different points and automatically selects the best one.
• BEST SHOT (page 86)
Simply select the sample scene that matches the type of image you are trying to record and the camera performs troublesome setups automatically for beautiful images every time. New BEST SHOT sample scenes include setups for High Sensitivity and Anti Shake.
• Business Shot (page 93)
Business Shot automatically corrects rectangular shapes when recording the image of a business card, document, whiteboard, or similar subjects from an angle.
• Movie recording with audio (page 95)
VGA size, 30 fps, Motion JPEG format
• MOTION PRINT (page 126)
Capture frames from a movie and create still images that are suitable for printing.
• Audio Snapshot mode (page 99)
Use this mode to record snapshots that also include audio.
• Voice Recording (page 100)
Quick and easy recording of voice input.
• Real-time RGB histogram (page 102)
An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness, which makes shooting under difficult lighting conditions easier than ever before.
10
INTRODUCTION
• Calendar screen (page 128)
A simple operation displays a full-month calendar on the cameras monitor screen. Each day of the full-month calendar shows a thumbnail of the first file recorded for that date, which helps to make searching for a particular file quicker and easier.
• After Recording (page 134)
Use this mode to add audio to snapshots after you record them.
• Selectable Sound Settings (page 148)
You can configure different sounds to play whenever you turn on the camera, press the shutter button half-way or all the way, or perform a key operation.
• World Time (page 153)
A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones.
• Support for SD memory cards and MMC (MultiMedia Cards) for memory expansion (page 159)
• Digital Print Order Format (DPOF) (page 167)
Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services.
• PictBridge and USB DIRECT-PRINT support (page
170)
Connect directly to a PictBridge or USB DIRECT-PRINT compatible printer and you can print images without going through a computer.
• PRINT Image Matching III Compatible (page 175)
Images include PRINT Image Matching setting and other camera setup information). A printer that supports PRINT Image Matching adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them.
• DCF Data Storage (page 189)
DCF (Design rule for Camera File system) data storage protocol provides image compatibility between the digital camera and printers.
III
III
reads this data and
11
data (mode
INTRODUCTION
• Bundled with Photo Loader and Photohands (pages 196, 199, 205)
Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy.

Precautions

General Precautions
Be sure to observe the following important precautions whenever using the EX-Z500.
All references in this manual to camera refer to the CASIO EX-Z500 Digital Camera.
Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the risk of serious accident.
Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center.
Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately.
Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver’s vision and create the risk of accident.
12
INTRODUCTION
Never fire the flash while it is too close to the subjects eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject.
Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc.
Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the cameras battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock.
Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance.
Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera.
Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater.
At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the risk of fire.
If the cameras case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the cameras battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center.
Never use the camera inside of an aircraft or in any other area where its use is prohibited. Doing so creates the risk of accident.
Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Always keep backup copies of data by transferring them to personal computer memory.
13
INTRODUCTION
Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory.
Test for proper operation before using the camera!
Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly.
14
INTRODUCTION
Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in file memory.
Removing the battery or memory card, or setting the
camera onto the USB cradle while the camera is performing a record or memory access operation
Removing the battery, removing the memory card, or
placing the camera onto the USB cradle while the operation lamp is still flashing green after you turn off the camera
Disconnecting the USB cable, removing the camera
from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication operation is being performed
Low battery powerOther abnormal operations
Any of the above conditions can cause an error message to appear on the monitor screen (page 220). Follow the instructions provided by the message to eliminate the cause of the error.
Operating conditions
This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F).
Do not use or keep the camera in the following areas.
In areas subject to direct sunlightIn areas subject to high humidity or dustNear air conditioners, heaters, or other areas subject
to temperature extremes
Inside of a closed vehicle, especially one parked in the
sun
In areas subject to strong vibration
15
INTRODUCTION
Condensation
When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation.
To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery cover open for a few hours.
Power Supply
Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.
This camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied power by the battery and/or the USB cradle for about 30 hours. Be sure to reconfigure these settings after power is interrupted (page 151).
Lens
Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction.
You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lens, and does not indicate malfunction of the camera.
16
INTRODUCTION
Caring for your camera
Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth.
Fingerprints, dirt, and other foreign matter on the flash can interfere with proper operation of the camera. Avoid touching the flash. If the flash becomes dirty, wipe it clean with a soft, dry cloth.
If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth.
Other
The camera may become slightly warm during use. This does not indicate malfunction.
17

QUICK START GUIDE

QUICK START GUIDE

First, charge the battery!

1.
Load the battery into the camera (page 32).
1
2
Stopper
2.
Place the camera onto the USB cradle to charge the battery (page 33).
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
• It takes about 180 minutes to achieve a full charge.
21 Inlet Type
3
○○○○○○○○○○○○○○○○
1 Plug-in Type
18
[CHARGE] lamp Charging: Lights red Charging Complete: Lights green
QUICK START GUIDE

To configure display language and clock settings

• Be sure to configure the following settings before using the camera to record images. See page 48 for details.
1
2, 3, 4, 5, 6, 7, 8, 9
DISP
[]
[][왘]
[]
SET
[SET]
1.
Press the power button to turn on the camera.
2.
Use [], [], [], and [] to select the language you want.
3.
Press [SET] to register the language setting.
4.
Use [], [], [], and [] to select the geographical area you want, and then press [SET].
5.
Use [] and [] to select the city you want, and then press [SET].
6.
Use [] and [] to select the summer time (DST) setting you want, and then press [SET].
7.
Use [] and [] to select the date format setting you want, and then press [SET].
8.
Set the date and the time.
9.
Press [SET] to register the clock settings and exit the setting screen.
19
QUICK START GUIDE
3

To record an image

Auto recording icon
See page 52 for details.
1.
Press [ ] (REC).
• This enters the REC (recording) mode.
2
Focus frame
Operation lamp
Before using a commercially available memory card, be sure to first format it using the camera’s formatting procedure. For details about formatting a memory card, see page 162.
2.
Point the camera at the subject, use the monitor screen to compose the image, and then press the shutter button half way.
1
• When the camera finishes its Auto Focus operation, the focus frame will turn green and the operation lamp lights green.
3.
Holding the camera still, gently press the shutter button all the way down.
20
QUICK START GUIDE

To view a recorded image

See page 115 for details.
1
2
1.
Press [ ] (PLAY).
• This enters the PLAY (playback) mode.
2.
Use [] and [] to scroll through the images.

To delete an image

See page 140 for details.
1
2, 3, 4, 5
1.
Press [ ] (PLAY).
2.
Press [] ( ).
3.
Use [] and [] to display the image you want to delete.
4.
Use [] and [] to select “Delete”.
• To exit the image delete operation without deleting anything, select “Cancel”.
5.
Press [SET] to delete the image.
21

GETTING READY

GETTING READY
This section contains information about things you need to know about and do before trying to use the camera.

About This Manual

This section contains information about the conventions used in this manual.
Terminology
The following table defines the terminology used in this manual.
This term as used in this manual:
camera
file memory
battery
charger
Means this:
The CASIO EX-Z500 Digital Camera
The location where the camera is currently storing images you record (page 53)
The NP-40 Rechargeable Lithium Ion Battery
The optionally available CASIO BC-30L charger
This term as used in this manual:
digital noise Tiny flecks or snow in a
Means this:
recorded image or on the monitor screen, which makes the image look grainy.
Button Operations
Button operations are indicated by the button name inside of brackets ([ ]).
On-screen Text
On-screen text is always enclosed by double quotation marks (“ ”).
Supplementary Information
IMPORTANT! indicates very important information you need to know in order to use the camera correctly.
NOTE indicates information that is useful when operating the camera.
22
GETTING READY
6
File Memory
The term file memory in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations.
The cameras built-in memory
An SD memory card loaded in the camera
A MultiMediaCard loaded in the camera
For more information about how the camera stores images, see page 189.

General Guide

The following illustrations show the names of each component, button, and switch on the camera.

Camera

Front
2
1
1 Zoom controller 2 Shutter button 3 Power button
7
4 Microphone 5 AF assist light/
self-timer lamp
6 Lens 7 Flash
23
3
4
5
GETTING READY
H
Back
8
9
0
F
E
C
D
8 Operation lamp 9 [ ] (PLAY mode) button 0 [ ] (REC mode) button A [BS] (BEST SHOT) button B Strap ring C [][][][] D [SET] button E [MENU] button F Monitor Screen
A B
[]
[][왘]
[]
DISP
SET
Bottom
G Stopper H Memory card slot I Battery compartment J Battery cover K Tripod screw hole
* Use this hole when attaching to a tripod.
L Connector M Speaker
G
[SET]
IJKLM
24
GETTING READY
6
2

USB Cradle

Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks.
Battery charging (page 33)
Viewing of images using the Photo Stand slideshow
feature (page 131).
TV connectability for viewing of images on a television screen (page 137).
Direct connection to a printer for printing (page 170)
Automatic transfer of images to a computer (page 176)
IMPORTANT!
Use only the USB cradle (CA-29) that comes with the camera. Other USB cradles are not supported.
25
Front
5
Back
8
7
4
1
1 Camera connector 2 [USB] lamp 3 [USB] button 4 [PHOTO] button 5 [CHARGE] lamp
3
6 [DC IN 5.3V]
(AC adaptor connector)
7 [AV OUT]
(AV output port)
8 [ ] (USB port)
GETTING READY

Monitor Screen Contents

The monitor screen uses various indicators and icons to keep you informed of the cameras status.
Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen
contents actually produced on the camera.

REC Mode

Screen Indicators appears momentarily
35
2 467
9
81
I H
G
F
E
1 Flash mode indicator
(page 62)
Auto
Flash Off
0
A B C
D
Flash On
Red-eye reduction
appears momentarily when you select Auto as the flash mode, and then disappears.
If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter button is pressed half way.
2 Focus mode indicator
(page 72)
Auto Focus
Macro
Pan Focus
Infinity
Manual Focus
when you select auto focus, and then disappears.
3 White balance indicator
(page 82)
Auto
AWB
Daylight
Cloudy
Shade
Day White
Daylight
Tungsten
Manual
appears momentarily
AWB
when you select auto white balance, and then disappears.
4 Continuous Shutter
mode (page 85)
None Single shot
Continuous shutter
5 Self-timer (page 67)
None 1-Image
Self-timer 10 sec
10
s
Self-timer 2 sec
2
s
Triple self-timer
x3
6 Recording types
Auto recording
BEST SHOT
Movie
Voice Recording
7 Metering mode indicator
(page 111)
Multi
Center Weighted
Spot
26
GETTING READY
8 • Snapshots: Image size
(page 70)
9 • Snapshots: Memory capacity
(pages 54, 222)
Movies: Remaining recording time (page 97)
0 • Snapshots: Image quality
(page 71)
F : Fine N : Normal E : Economy
Movies: Image quality (page 96)
HQ : High Quality NORMAL : Normal LP : Long Play
A ISO sensitivity
(page 110)
B Aperture value (page 54)
C Shutter speed value
(page 54)
D Date and time
(page 151)
E EV value (page 80)
F Battery capacity
(page 38)
G Histogram (page 102)
H Anti Shake indicator
(page 91)
I Focus frame
(page 53)
Focusing complete: Green
Focusing failed: Red
NOTE
An out of range aperture, shutter speed, or ISO sensitivity setting causes the corresponding monitor screen value to turn amber.
Changing the setting of any one of the following functions will cause Icon Help text to appear on the monitor screen. Flash mode, Focus mode, White balance, Self-timer, Recording type, EV shift
27
GETTING READY
K
L
K Digital zoom indicator (page 60)
L Zoom indicator (page 60)
Left side indicates optical zoom.
Right side indicates digital zoom.

PLAY Mode

F
E
1 PLAY mode file type
Snapshot
Movie
Audio Snapshot
Voice Recording
2 Image protection
indicator (page 143)
28
D
12 3
C
0AB
3 Folder name/File name
(page 142)
Example : When a file named CIMG0023.JPG is stored in a folder named 100CASIO
100-0023
Folder name File name
4 • Snapshots: Image quality
(page 71) F : Fine N : Normal E : Economy
Movies: Recording time (page 97)
4 5
6 7 8 9
GETTING READY
5 • Snapshots: Image Size
(page 70)
Movies: Image quality (page 96) HQ : High Quality NORMAL : Normal LP : Long Play
6 ISO sensitivity (page 110)
7 Aperture value
(page 54)
8 Shutter speed value
(page 54)
9 Date and time
(page 151)
0 Metering mode indicator
(page 111)
Multi
Center Weighted
Spot
A White balance indicator
(page 82)
Auto
AWB
Daylight
Cloudy
Shade
Day White
Daylight
Tungsten
Manual
B Flash mode indicator
(page 62)
Flash On
Flash Off
Red-eye reduction
C Recording types
Auto recording
BEST SHOT
D Battery capacity
(page 38)
E Histogram (page 102)
F EV value (page 80)
IMPORTANT!
Some information may not display properly if you display an image that was recorded using a different digital camera model.
29
GETTING READY

Changing the Contents of the Monitor Screen

Each press of [] (DISP) changes the contents of the monitor screen as shown below.
REC Mode
Indicators on Histogram on
Indicators off
PLAY Mode
Indicators on Histogram/Details on
Indicators off
30
Loading...
+ 197 hidden pages