Casio EQB-501, 5519 Quick Start Guide

MA1704-EB

Quick Reference Manual 5519

Congratulations upon your selection of this CASIO watch. To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”. Be sure to keep all user documentation handy for future reference.

Bluetooth® is a registered trademark or trademark of Bluetooth SIG, Inc. of the United States.

Your watch has a Mobile Link function that allows it to communicate with a Bluetooth® mobile phone and adjust its time settings to match those of the mobile phone.

• This product complies with or has received approval under radio laws in various

countries and geographic areas. Use of this product in an area where it does not conform to or where it has not been approved under applicable radio laws may be punishable under local laws. For details, visit http://world.casio.com/ce/BLE/.

• Use of this product inside of an aircraft is restricted by the aviation laws of each

country. Be sure to obey instructions provided by flight personnel concerning use of devices such as this product.

For details about functions, go to the website below and select your language for the EQB-

501.

http://support.casio.com/wat/bs/

Using the Watch

Charging

Remove the watch from your wrist and place it in a brightly lit area.

• The watch may become hot when exposed to light for charging. Take care to avoid

burn injury.

• Avoid charging in locations where it is very hot.

Power Saving

• Leaving the watch in a dark location for about one hour between the hours of 10p.m.

and 6a.m. will cause the second hand to stop at 12o’clock.

• Leaving the watch in a dark location for about one week will cause all hands to stop at

12o’clock.

Battery Alerts

• Low Battery

Second hand jumps every two seconds (Low Battery Alert).

• Dead Battery

All hands stopped at 12 o’clock.

General Guide

2413

Click 2

Click 1

56 7

* Hold down C for about 1.5 seconds to connect via Bluetooth.

Setting the Time

1. Rotate the crown towards you to loosen it.

2. Pull the crown out to the second click.

• This enables setting of the hour and minute.

3. Rotate the crown to change the current hour and minute setting.

4. Press A.

• This enables the month and day setting.

5. Use B to change the month setting.

6. Rotate the crown to change the day setting.

7. Press A.

• This enables the year 10’s digit setting.

8. Rotate the crown to change the year 10’s digit setting.

Crown

1. : Bluetooth Connection

2. Hour and minute hands: Current time

3. AL: AL mark

4. Dial (9 o’clock): Dual Time

5. R: Bluetooth connection standby

6. Day of the week

7. 0·100·200·300: Speedometer

Month Setting

Month Day

Year 10’s Digit Setting

9. Press A.

• This enables the year 1’s digit setting.

10.

Rotate the crown to change the year 1’s digit setting.

11.

After the settings are the way you want, push the crown back in and then screw it securely into place.

Changing the Dual Time Setting

1. Rotate the crown towards you to loosen it.

2. Pull the crown out to the first click.

3. Rotate the crown to move the hands to the time you want to set.

4. After the setting is the way you want, push the crown back in and then screw it securely into place.

Year 1’s Digit Setting

Dual Time

Specifications

Accuracy at normal temperature

Timekeeping : Hour, minute (hands move at 10-second intervals), second; 24-hour

Stopwatch : Measuring unit: 1 second

Alarm : Setting units: Hour, minute

Mobile Link Functions

Other : Power Saving; Low battery alert; Airplane Mode (disables data

Power Supply : Solar panel and one rechargeable battery

Approximate Battery Life

:±15 seconds a month

timekeeping, date, day of the week

Calendar system: Full-auto calendar from 2000 to 2099 Others: Dual time (hour, minute; 24-hour timekeeping; Swapping

with Home Time)

Measuring capacity: 23:59'59" (24 hours) Measurement functions: Elapsed time, split times Speed Display: 0 to 300 units/hour

Beeper: 10 seconds

: Auto Time Correction

Time setting adjusted automatically at preset time.

Auto summer time switching

Automatic switching between standard time and summer time.

Mail checking

Check for incoming mail from the watch

Phone finder

Watch operation sounds the alert sound of the mobile phone.

Stopwatch data transfer

Lap/Split time display measured in 1/1000 second for up to

100entries Hand position correction Data Communication Specifications

Bluetooth

Frequency Band: 2440MHz-2480MHz

Maximum Transmission: 0 dBm (1 mW)

Communication range: 2 meters max. (depends on environment)

communication)

: 8 months

Conditions

• Mobile Link: 4 times (40 seconds)/day

• Alarm: Once (10 seconds)/day

• Power Saving: 6 hours/day