Casio 3229 Reference Guide

MA1804-EA

User’s Guide 3229/3421

ENGLISH

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”. Be sure to keep all user documentation handy for future reference.

Important!

x This manual provides a brief overview of your watch.

Configuring Time and Date Settings

To set the time and date

1. Press A while in the Timekeeping Mode. The seconds digits flash on the display

because they are selected.

2. Press C to change the selection in the following sequence.

Seconds Hour Minute

Day Month Year

3. While the seconds digits are selected (flashing), press B to reset the seconds to “00”. If you press B while the seconds count is in the range of 30 to 59, the seconds are reset to “00” and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged.

E-2

Mode Selection and Operations

x Press C to change the mode.

Timekeeping Mode Alarm Mode

For a full Operation Guide and Q&A information about this product, go to the website below.

http://world.casio.com/manual/wat/

4. While any other digits (besides seconds) are selected (flashing), press B to increase the number. Holding down B changes the number at high speed.

x To switch between the 12-hour and 24-hour formats, press DD while

some digits are flashing.

5. After you set the time and date, press A to return to the Timekeeping Mode.

x After you perform an operation in any mode, pressing C returns to the

Timekeeping Mode.

Countdown Timer Mode Stopwatch Mode

E-1

E-3

Turns on illumination.

E-4

Specifications

Accuracy at normal temperature: ±15 seconds a month Timekeeping: Hour, minutes, seconds, pm (PM), month, day, the day of the week

Time system: Switchable between 12-hour and 24-hour formats Calendar system: Auto-calendar pre-programmed from the year 2000 to 2099

Alarm: Multi-function alarm, hourly time signal Countdown Timer

Measuring unit: 1 second Input range: from 1 second to 24 hours Other: Auto-repeat function

Stopwatch

Measuring units: 1/100 second (for the first 60 minutes)

Measuring capacity: 23 hours, 59 minutes, 59 seconds Measuring modes: Elapsed time, split time and two finishes

E-6

1 second (after 60 minutes)

Split/

Reset

Illumination: EL (electro-luminescent) backlight Battery: One lithium battery (Type: CR2016)

Approximately 2 years on type CR2016 (Assuming 3.5 seconds light operation and 20 seconds alarm operation per day)

Note: Frequent use of the backlight shortens the battery life noted above.

Specifications are subject to change without notice.

Start/ Stop

E-5

E-7