CARVIN VX412T, VX412B, VX212, VX212S, VX112 User Manual

VX Series Guitar Cabinets

USER MANUAL

The VX series cabinets are designed to let the passion and detail of your music
be heard. The Baltic Birch is sou ght after by top musicians for it’s pure sound and
roadworthiness. The VX goes fur ther, using dado joint construction and socketed
internal bracing with steel corn ers and handles. Thick sides and premium gr ill cloth
give you the stage presence to match your sound. Choose different tunings by
removing the back panels and open undiscovered tonal possibilities.

VX412T
VX412B

Internal bracing on 212, 412

custom coverings

VX212S VX112

VX212

Removable back panels for

open, closed or ported responses

VX212S on VX212

16262 WEST BERNARDO DR. SAN DIEGO, CA 92127

800-854-2235 CARVINAUDIO.COM

REAR CONNECTION PLATE

(no switch on VX112)

Remove the rubber plug to access

the Mono/Stereo switch

Replace the plug when finished

Note: You will need to change the

impedance switch on tube amps.

(no switch on VX112)

SPECIFICATIONS

VX112
Configuration: One 12” speaker
tilt-back or flat side orientation

Frequency Response: 76 Hz – 5.5 kHz (with back closed)

Power Handling:
Carvin GT12 speaker 100W (standard)
Celestion™ Vintage30™ 60W (optional)

Impedance: 16 Ohms

Enclosure: Premium Russian Baltic Birch,
Removable back panel
Removable top amp stop for tilt-back

Finish: Black Vinyl standard,
optional colors and textures

Transport: 2 Recessed Steel Handles

Grill: Acoustically Transparent Grillcloth
removable for speaker access
rotates 90 degrees for tilt or flat

Connections: Two 1/4” connectors, mono

Dimensions (H x W x D): 18” x 17.5” x 12.25”
458 x 445 x 321mm

Net Wt: 32.2 lb (14.6 kg)

Accessories CVVX112 cover

REMOVABLE BACK PANELS

Speaker response can be changed by

removing the rear panels for the option of

sealed or ported/open-back operation.

412 and 212 models feature two openings

for more variation.

VX212, VX212S
Configuration: Two 12” speakers
VX212 horizontal or vertical orientation
VX212S vertical, slant top

Frequency Response: 72 Hz – 5.5 kHz (with backs closed)

Power Handling:
Carvin GT12 speaker 200W mono, 100W/100W stereo (std.)
Celestion™ Vintage30™ 120W mono, 60W/60W stereo (opt.)

Impedance: 16 Ohms mono, 8 Ohms stereo

Enclosure: Premium Russian Baltic Birch,
2 Removable back panels

Finish: Black Vinyl standard,
optional colors and textures

Transport: 2 Recessed Steel Handles

Grill: Acoustically Transparent Grillcloth
removable for speaker access

Connections: Two 1/4” connectors
mono/stereo switch

Dimensions (H x W x D): 30.75” x 17.5” x 12.25” (S-top=9.25”)
781 x 445 x 321mm (S-top=235mm)
Net Wt:
VX212 54 lb (24.6 kg)
VX212S 51.8 lb (23.6 kg)

Accessories CVVX212 cover for VX212
CVVX212S for VX212S

To remove panels, unscrew the six screws.

Store the screws in the threaded holes.

VX412T, VX412B
Configuration: Four 12” speakers
VX412T slant top
VX412B square (bottom)

Frequency Response: 68 Hz – 5.5 kHz (with backs closed)

Power Handling:
Carvin GT12 speaker 400W mono, 200W/200W stereo (std.)
Celestion™ Vintage30™ 240W mono, 120W/120W stereo (opt.)

Impedance: 16 Ohms mono, 8 Ohms stereo

Enclosure: Premium Russian Baltic Birch,
2 Removable back panels

Finish: Black Vinyl standard,
optional colors and textures

Transport: 2 Recessed Steel Handles,
caster sockets fit CTS4

Grill: Acoustically Transparent Grillcloth
removable for speaker access

Connections: Two 1/4” connectors
mono/stereo switch

Dimensions (H x W x D): 30.75” x 30.25” x 14”(S-top=11”)
781 x 769 x 356mm (S-top=280mm)
Net Wt:
VX412T 89 lb (40.5 kg)
VX412B 92 lb (41.8 kg)

Accessories CVVX412T or CVVX412B covers
CTS4 caster set (4)

LIMITED WARRANTY
Your Carvin loudspeaker is guaranteed against failure due to manufacturing defects for 5 YEARS unless otherwise stated. Carvin will service and supply all parts at no charge to the customer

providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE
ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for equipment damaged by this unit. This warranty does not cover, and no liability is
assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties,
expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

MAINTAINING YOUR EQUIPMENT
The panel of your unit can be wiped with a dry or slightly damp cloth in order to remove dust and bring back the new look. A void spilling liquids or allowing any other foreign matter inside the unit. As

with all pro gear, avoid prolonged use in caustic environments (salt air). When used in such an environment, be sure the equipment is adequately protected.

SERVICE:
In the USA: email: [e-mail], or visit our website: www.carvinaudio.com and under “SUPPORT” click on “REPAIR INFORMATION”
Outside the USA: contact your dealer, or go to http://www.carvinaudio.com click on “DEALERS” for your nearest service center.
Include a written description of the problem with serial number and date of purchase.

76-01412C 122716