Carvin RL6815, RC210, R600 User Manual

This symbol is intended to alert the user to the presence of uninsulated “dan-

product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

gerous voltage” within the

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:

WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

POWER SOURCES: The product should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polarization is not defeated.

POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

SERVICING: The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer to replacement text on the unit for correct fuse type.

SAFETY INSTRUCTIONS (EUROPEAN)

The conductors in the AC power cord are colored in accordance with the following code.

GREEN & YELLOW—Earth BLUE—Neutral BROWN—Live

U.K. MAIN PLUG WARNING: Amolded main plug that has been cut off from the cord is unsafe. NEVER UNDER A N YC I R C U M S TANCES SHOULD YOU INSERTA D A M A G E D OR CUTMAIN PLUG INTO APOWER SOCKET.

LIMITED WARRANTY

Your Carvin product is guaranteed against failure for 1 YEAR unless otherwise stated. C a rvin will service and supply all parts at no charge to the customer providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PA RTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WA R R A N T Y. Carvin assumes no responsibility for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products.

CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CON-

SEQUENTIAL DAMAGES.

When RETURNING merchandise to the factory, you may call for a return authorization number. Describe in writing each problem. If your unit is out of warranty, you will be charged the current FLAT RATE for parts and labor to bring your unit up to factory specifications.

MAINTAINING YOUR EQUIPMENT

Avoid spilling liquids or allowing any other foreign matter inside the unit. The panel of your unit can be wiped from time to time with a dry or slightly damp cloth in order to remove dust and bring back the new look.

As with all pro gear, avoid prolonged use in caustic environments (salt air). When used in such an environment, be sure the amplifier is adequately protected by rack, covers, etc..

REPLACEMENT PARTS LIST FOR R600

80-40628 R600 Driver & Output PCB REF DESCRIPTION PART #

A1 5532 Op Amp 60-55320 A2 5532 Op Amp 60-55320 A3 4558 Op Amp 60-45580 A5 4558 Op Amp 60-45580 A6 4558 Op Amp 60-45580 A7 4558 Op Amp 60-45580 A8 4558 Op Amp 60-45580 A9 4558 Op Amp 60-45580 A10 4558 Op Amp 60-45580 A11 4558 Op Amp 60-45580 A12 4558 Op Amp 60-45580 A13 5532 Op Amp 60-55320 A14 4558 Op Amp 60-45580 A15 4558 Op Amp 60-45580 A16 4558 Op Amp 60-45580 A200 5532 Op Amp 60-55320 A300 4558 Op Amp 60-45580 A301 4558 Op Amp 60-45580 A302 4558 Op Amp 60-45580 A400 5532 Op Amp 60-55320 BR1 Diode Bridge Rectifier 60-35041 C1 Capacitor, Mylar, 0.0068µF, 100V 46-68212 C2 Capacitor, Ceramic, 120pF, 500V 45-12152 C3 Capacitor, Ceramic, 120pF, 500V 45-12152 C4 Capacitor, Mylar, 0.1µF, 100V 46-10412 C5 Capacitor, Electrolytic, 10µF, 63V 47-10061 C6 Capacitor, Ceramic, 39pF, 500V 45-39052 C7 Capacitor, Mylar, 0.047µF, 100V 46-47312 C8 Capacitor, Ceramic, 560pF, 500V 45-56152 C9 Capacitor, Mylar, 0.1µF, 100V 46-10412 C10 Capacitor, Electrolytic, 10µF, 63V 47-10061 C11 Capacitor, Ceramic, 560pF, 500V 45-56152 C12 Capacitor, Electrolytic, 10µF, 63V 47-10061 C13 Capacitor, Mylar, 0.0022µF, 100V 46-22212 C14 Capacitor, Electrolytic, 10µF, 63V 47-10061 C15 Capacitor, Mylar, 0.047µF, 100V 46-47312 C16 Capacitor, Mylar, 0.0033µF, 100V 46-33212 C17 Capacitor, Mylar, 0.0033µF, 100V 46-33212 C18 Capacitor, Ceramic, 39pF, 500V 45-39052 C19 Capacitor, Ceramic, 120pF, 500V 45-12152 C23 Capacitor, Electrolytic, 10µF, 63V 47-10061 C27 Capacitor, Ceramic, 39pF, 500V 45-39052 C28 Capacitor, Mylar, 0.022µF, 100V 46-22312 C29 Capacitor, Mylar, 0.022µF, 100V 46-22312 C30 Capacitor, Electrolytic, 10µF, 63V 47-10061 C31 Capacitor, Mylar, 0.047µF, 100V 46-47312 C32 Capacitor, Ceramic, 120pF, 500V 45-12152 C33 Capacitor, Mylar, 0.01µF, 100V 46-10312 C34 Capacitor, Mylar, 0.01µF, 100V 46-10312 C35 Capacitor, Mylar, 0.001µF, 100V 46-10212 C37 Capacitor, Tant, 1µF, 35V 48-01031 C38 Capacitor, Mylar, 0.022µF, 100V 46-22312 C39 Capacitor, Tant, 1µF, 35V 48-01031 C40 Capacitor, Mylar, 0.01µF, 100V 46-10312 C41 Capacitor, Mylar, 0.22µF, 100V 41-22412 C42 Capacitor, Mylar, 0.01µF, 100V 46-10312 C43 Capacitor, Mylar, 0.1µF, 100V 46-10412 C44 Capacitor, Mylar, 0.0068µF, 100V 46-68212 C45 Capacitor, Mylar, 0.068µF, 100V 46-68312 C46 Capacitor, Mylar, 0.0033µF, 100V 46-33212 C47 Capacitor, Mylar, 0.033µF, 100V 46-33312 C48 Capacitor, Mylar, 0.0022µF, 100V 46-22212 C49 Capacitor, Mylar, 0.022µF, 100V 46-22312 C50 Capacitor, Mylar, 0.001µF, 100V 46-10212 C51 Capacitor, Mylar, 0.01µF, 100V 46-10312 C52 Capacitor, Ceramic, 680pF, 500V 45-68152 C53 Capacitor, Mylar, 0.0068µF, 100V 46-68212 C54 Capacitor, Ceramic, 560pF, 500V 45-56152 C55 Capacitor, Ceramic, 56pF, 500V 45-56052 C57 Capacitor, Mylar, 0.01µF, 100V 46-10312 C58 Capacitor, Mylar, 0.01µF, 100V 46-10312 C59 Capacitor, Electrolytic, 10µF, 63V 47-10061 C60 Capacitor, Mylar, 0.022µF, 100V 46-22312 C61 Capacitor, Mylar, 0.022µF, 100V 46-22312 C62 Capacitor, Ceramic, 120pF, 500V 45-12152 C64 Capacitor, Ceramic, 39pF, 500V 45-39052 C67 Capacitor, Mylar, 0.033µF, 100V 46-33312 C68 Capacitor, Mylar, 0.01µF, 100V 46-10312 C69 Capacitor, Mylar, 0.1µF, 100V 46-10412 C73 Capacitor, Electrolytic, 10µF, 63V 47-10061 C74 Capacitor, Electrolytic, 10µF, 63V 47-10061 C75 Capacitor, Electrolytic, 10µF, 63V 47-10061 C76 Capacitor, Electrolytic, 10µF, 63V 47-10061 C77 Capacitor, Electrolytic, 10µF, 63V 47-10061 C79 Capacitor, Electrolytic, 10µF, 63V 47-10061 C83 Capacitor, Mylar, 0.0022µF, 100V 46-22212 C84 Capacitor, Ceramic, 680pF, 500V 45-68152 C85 Capacitor, Electrolytic, 10µF, 63V 47-10061 C88 Capacitor, Electrolytic, 10µF, 63V 47-10061 C89 Capacitor, Electrolytic, 10µF, 63V 47-10061 C121 Capacitor, Mylar, 0.068µF, 100V 46-68312 C215 Capacitor, Ceramic, 27pF, 500V 45-27052 C216 Capacitor, Ceramic, 56pF, 500V 45-56052 C217 Capacitor, Ceramic, 250pF, 500V 45-25152 C218 Capacitor, Electrolytic, 10µF, 63V 47-10061 C219 Capacitor, Mylar, 0.01µF, 100V 46-10312 C220 Capacitor, Mylar, 0.001µF, 100V 46-10212 C221 Capacitor, Mylar, 0.068µF, 100V 46-68312 C310 Capacitor, Mylar, 0.047µF, 100V 46-47312

C312 Capacitor, Mylar, 0.047µF, 100V 46-47312 C313 Capacitor, Electrolytic, 10µF, 63V 47-10061 C315 Capacitor, Mylar, 0.047µF, 100V 46-47312 C316 Capacitor, Mylar, 0.047µF, 100V 46-47312 C317 Capacitor, Mylar, 0.047µF, 100V 46-47312 C318 Capacitor, Electrolytic, 470µF 25V 47-47125 C415 Capacitor, Ceramic, 27pF, 500V 45-27052 C416 Capacitor, Ceramic, 56pF, 500V 45-56052 C417 Capacitor, Mylar, 250pF, 500V 45-25152 C418 Capacitor, Electrolytic, 10µF, 63V 47-10061 C419 Capacitor, Mylar, 0.01µF, 100V 46-10312 C420 Capacitor, Mylar, 0.001µF, 100V 46-10212 C501 Capacitor, Electrolytic, 10,000µF, 63V 42-10363 C502 Capacitor, Electrolytic, 10,000µF, 63V 42-10363 C503 Capacitor, Electrolytic, 1000µF 35V 47-10235 C504 Capacitor, Electrolytic, 1000µF 35V 47-10235 C505 Capacitor, Mylar, 0.047µF, 100V 46-47312 C506 Capacitor, Mylar, 0.047µF, 100V 46-47312 C507 Capacitor, Electrolytic, 220µF, 50V 47-22151 C517 Capacitor, Electrolytic, 470F, 25V 47-47125 C520 Capacitor, Electrolytic, 220pF, 50V 47-22151 C572 Capacitor, Electrolytic , 47µF, 63V 47-47061 D1 LED, small Red 60-75320 D2 Diode, 1N914, HI Speed 61-19140 D3 LED, small Green 60-75330 D4 LED, small Red 60-75320 D5 LED, small Yellow 60-75340 D9 Diode, 1N914, HI Speed 61-19140 D10 LED, small Red 60-75320 D11 LED, small Red 60-75320 D12 Diode, 1N914, HI Speed 61-19140 D13 Diode, 1N914, HI Speed 61-19140 D14 Diode, 1N914, HI Speed 61-19140 D103 LED, small Red 60-75320 D106 Diode, 1N4003, 1A 200V 61-40030 D107 Diode, 1N4003, 1A 200V 61-40030 D108 Diode, 1N4003, 1A 200V 61-40030 D203 LED, small Red 60-75320 D204 LED, small Red 60-75320 D205 Diode, 1N4003, 1A 200V 61-40030 D206 Diode, 1N4003, 1A 200V 61-40030 D207 Diode, 1N4003, 1A 200V 61-40030 D208 Diode, 1N4003, 1A 200V 61-40030 D209 Diode, 1N4003, 1A 200V 61-40030 D214 Diode, 1N4003, 1A 200V 61-40030 D310 Diode, 1N4003, 1A 200V 61-40030 D311 Diode, 1N4003, 1A 200V 61-40030 D312 Diode, 1N4003, 1A 200V 61-40030 D404 LED, small Red 60-75320 D409 Diode, 1N4003, 1A 200V 61-40030 D414 Diode, 1N4003, 1A 200V 61-40030 D501 Diode, 1N4003, 1A 200V 61-40030 D502 Diode, 1N4003, 1A 200V 61-40030 D503 Diode, 1N4003, 1A 200V 61-40030 D504 Diode, 1N4003, 1A 200V 61-40030 D505 Diode, 1N4003, 1A 200V 61-40030 D506 Diode, 1N4003, 1A 200V 61-40030 D520 Diode, 1N4003, 1A 200V 61-40030 H1A Header, 4 Pin AMP 23-08604 H1B Header, 4 Pin AMP 23-08604 H2-A Header, 10 Pin SHS Vert 23-11010 H2-B Header, 10 Pin SHS Vert 23-11010 H2A Header, 4 Pin SHS Vert 23-11004 H2B Header, 4 Pin SHS Vert 23-11004 H3-B Header, 10 Pin SHS Vert 23-11010 H3A Header, 10 Pin SHS Vert 23-11010 H4-A Header, 8 Pin SHS Vert 23-11008 H4-B Header, 8 Pin SHS Vert 23-11008 H5 Header, 2 Pin Panduit Vert 23-10002 H5-A Header, 4 Pin SHS Vert 23-11004 H5-B Header, 4 Pin SHS Vert 23-11004 H6-A Header, 4 Pin SHS Vert 23-11004 H6-B Header, 4 Pin SHS Vert 23-11004 H6A Header, 4 Pin Vert 23-08604 H6B Header, 4 Pin Vert 23-08604 H7 Header, AMP 9 Pin 23-08609 H8 Header, 2 Pin Panduit Vert 23-10002 H9 Header, 2 Pin Panduit Vert 23-10002 H10 Not Used J1 Mono Jack, 1/4”, 3 Pin Plastic, 24mm 21-06453 J2 Mono Jack, 1/4”, 3 Pin Plastic, 24mm 21-06453 J3 Stereo Jack, 1/4”, 7 Pin Plastic, 24mm 21-06457 J4 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J5 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J6 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J7 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J8 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J9 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J10 Jack XLR Male, Neutr 21-40001 J11 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J12 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J13 Stereo Jack, 1/4”, 5Pin Rean, 24mm 21-50545 J102 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 J202 Mono Jack, 1/4”, 3Pin Rean, 24mm 21-50345 K100 Relay 24V12A SPDT 70-05712 K200 Relay 24V12A SPDT 70-05712 L100 Inductor, 3.3µH, Air Core 15-00165 L200 Inductor, 3.3µH, Air Core 15-00165 OP1 Opto Isolator, VTL5C2 60-50253 P1 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P2 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501

P3 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P4 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P5 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P6 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P7 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P8 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P9 Pot, 16, 15C50Kx2, D-shaft, Vert. 15mm72-16503 P10 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P11 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P12 Pot, 16, B50K, D-shaft, Vert. 15mm 71-16501 P13 Fader B10K C30m15 71-10331 P14 Fader B10K C30m15 71-10331 P15 Fader B10K C30m15 71-10331 P16 Fader B10K C30m15 71-10331 P17 Fader B10K C30m15 71-10331 P18 Fader B10K C30m15 71-10331 P19 Fader B10K C30m15 71-10331 P20 Fader B10K C30m15 71-10331 P21 Fader B10K C30m15 71-10331 P23 Pot, 16, 15C50Kx2, D-shaft, Vert. 15mm72-16503 P101 Pot, Trimmer 500Ω, Vert 71-24500 P201 Pot, Trimmer 500Ω, Vert 71-24500 Q1 Transistor, Darlington NPN, MPSA14 60-00014 Q2 J175, TO-92, JFETP-Channel 60-17500 Q3 J175, TO-92, JFETP-Channel 60-17500 Q4 J175, TO-92, JFETP-Channel 60-17500 Q5 J175, TO-92, JFETP-Channel 60-17500 Q7 Transistor, Darlington NPN, MPSA14 60-00014 Q8 Transistor, Darlington NPN, MPSA14 60-00014 Q101 Transistor, TIP31C NPN, 3A 100V 60-31000 Q102 Transistor, MPSW42 NPN, HV 1.0W 60-00042 Q103 Transistor, CENW92, HV PNP, 1.0W 60-00092 Q104 Transistor, MJE15033 PNP, 3A 100V 60-15033 Q105 Transistor, MJE15032 NPN, 3A 100V 60-15032 Q106 Transistor, TIP31C NPN, 3A 100V 60-31000 Q107 Transistor, MJL21194 NPN, 200W 60-21194 Q108 Transistor, MJL21194 NPN, 200W 60-21194 Q109 N/U Q110 Transistor, MJL21193 PNP, 200W 60-21193 Q111 Transistor, MJL21193 PNP, 200W 60-21193 Q112 N/U Q114 Transistor, 2N5400 PNP 60-54000 Q202 Transistor, MPSW42 NPN, HV 1.0W 60-00042 Q203 Transistor, CENW92, HV PNP, 1.0W 60-00092 Q204 Transistor, MJE15033 PNP, 3A 100V 60-15033 Q205 Transistor, MJE15032 NPN, 3A 100V 60-15032 Q206 Transistor, TIP31C NPN, 3A 100V 60-31000 Q207 Transistor, MJL21194 NPN, 200W 60-21194 Q208 Transistor, MJL21194 NPN, 200W 60-21194 Q209 N/U Q210 Transistor, MJL21193 PNP, 200W 60-21193 Q211 Transistor, MJL21193 PNP, 200W 60-21193 Q212 N/U Q214 Transistor, 2N5400 PNP 60-54000 Q301 Transistor, Darlington NPN, MPSA14 60-00014 Q302 Transistor, 2N5400 PNP 60-54000 Q303 Transistor, 2N5400 PNP 60-54000 R1 Resistor 1/4W, ±5%, 470K 50-47055 R2 Resistor 1/4W, ±5%, 6.8K 50-68035 R3 Resistor 1/4W, ±5%, 150K 50-15055 R4 Resistor 1/4W, ±5%, 33K 50-33045 R5 Resistor 1/4W, ±5%, 6.8K 50-68035 R6 Resistor 1/4W, ±5%, 1K 50-10035 R7 Resistor 1/4W, ±5%, 180K 50-18055 R8 Resistor 1/4W, ±5%, 100K 50-10055 R9 Resistor 1/4W, ±5%, 22K 50-22045 R10 Resistor 1/4W, ±5%, 470Ω 50-47025 R11 Resistor 1/4W, ±5%, 470Ω 50-47025 R12 Resistor 1/4W, ±5%, 2.2K 50-22035 R13 Resistor 1/4W, ±5%, 4.7K 50-47035 R14 Resistor 1/4W, ±5%, 4.7K 50-47035 R15 Resistor 1/4W, ±5%, 4.7K 50-47035 R16 Resistor 1/4W, ±5%, 4.7K 50-47035 R17 Resistor 1/4W, ±5%, 1K 50-10035 R18 Resistor 1/4W, ±5%, 15K 50-15045 R19 Resistor 1/4W, ±5%, 1M 50-10065 R20 Resistor 1/4W, ±5%, 1K 50-10035 R21 Resistor 1/4W, ±5%, 150K 50-15055 R22 Resistor 1/4W, ±5%, 47K 50-47045 R23 Resistor 1/4W, ±5%, 47K 50-47045 R24 Resistor 1/4W, ±5%, 47K 50-47045 R25 Resistor 1/4W, ±5%, 150K 50-15055 R26 Resistor 1/4W, ±5%, 47K 50-47045 R27 Resistor 1/4W, ±5%, 47K 50-47045 R28 Resistor 1/4W, ±5%, 47M 50-47065 R29 Resistor 1/4W, ±5%, 22K 50-22045 R30 Resistor 1/4W, ±5%, 10K 50-10045 R31 Resistor 1/4W, ±5%, 10K 50-10045 R32 Resistor 1/4W, ±5%, 22K 50-22045 R33 Resistor 1/4W, ±5%, 47K 50-47045 R34 Resistor 1/4W, ±5%, 100Ω 50-10025 R35 Resistor 1/4W, ±5%, 100Ω 50-10025 R36 Resistor 1/4W, ±5%, 10K 50-10045 R37 Resistor 1/4W, ±5%, 10K 50-10045 R38 Resistor 1/4W, ±5%, 10K 50-10045 R39 Resistor 1/4W, ±5%, 10K 50-10045 R40 Resistor 1/4W, ±5%, 300K 50-30055 R41 Resistor 1/4W, ±5%, 470Ω 50-47025 R42 Resistor 1/4W, ±5%, 470Ω 50-47025 R43 Resistor 1/4W, ±5%, 470Ω 50-47025 R44 Resistor 1/4W, ±5%, 470Ω 50-47025

CAUTION

RISK OF ELECTRIC SHOCK

R45 Resistor 1/4W, ±5%, 1M 50-10065 R46 Resistor 1/4W, ±5%, 100K 50-10055 R47 Resistor 1/4W, ±5%, 100K 50-10055 R48 Resistor 1/4W, ±5%, 100K 50-10055 R49 Resistor 1/4W, ±5%, 100Ω 50-10025 R50 Resistor 1/4W, ±5%, 100Ω 50-10025 R51 Resistor 1/4W, ±5%, 1M 50-10065 R53 Resistor 1/4W, ±5%, 10K 50-10045 R54 Resistor 1/4W, ±5%, 10K 50-10045 R55 Resistor 1/4W, ±5%, 10K 50-10045 R56 Resistor 1/4W, ±5%, 10K 50-10045 R57 Resistor 1/4W, ±5%, 2.2K 50-22035 R58 Resistor 1/4W, ±5%, 2.2K 50-22035 R59 Resistor 1/4W, ±5%, 100Ω 50-10025 R60 Resistor 1/4W, ±5%, 10K 50-10045 R61 Resistor 1/4W, ±5%, 33K 50-33045 R62 Resistor 1/4W, ±5%, 10K 50-10045 R63 Resistor 1/4W, ±5%, 33K 50-33045 R64 Resistor 1/4W, ±5%, 1M 50-10065 R65 Resistor 1/4W, ±5%, 1M 50-10065 R66 Resistor 1/4W, ±5%, 10K 50-10045 R67 Resistor 1/4W, ±5%, 10K 50-10045 R68 Resistor 1/4W, ±5%, 10K 50-10045 R69 Resistor 1/4W, ±5%, 2.4K 50-24035 R70 Resistor 1/4W, ±5%, 220K 50-22055 R71 Resistor 1/4W, ±5%, 1.8K 50-18035 R72 Resistor 1/4W, ±5%, 220K 50-22055 R73 Resistor 1/4W, ±5%, 1.8K 50-18035 R74 Resistor 1/4W, ±5%, 300K 50-30055 R75 Resistor 1/4W, ±5%, 2K 50-20035 R76 Resistor 1/4W, ±5%, 300K 50-30055 R77 Resistor 1/4W, ±5%, 2.4K 50-24035 R78 Resistor 1/4W, ±5%, 300K 50-30055 R79 Resistor 1/4W, ±5%, 2K 50-20035 R80 Resistor 1/4W, ±5%, 360K 50-36055 R81 Resistor 1/4W, ±5%, 2.2K 50-22035 R82 Resistor 1/4W, ±5%, 360K 50-36055 R83 Resistor 1/4W, ±5%, 2.2K 50-22035 R84 Resistor 1/4W, ±5%, 300K 50-30055 R85 Resistor 1/4W, ±5%, 2.2K 50-22035 R86 Resistor 1/4W, ±5%, 150K 50-15055 R87 Resistor 1/4W, ±5%, 10K 50-10045 R88 Resistor 1/4W, ±5%, 10K 50-10045 R89 Resistor 1/4W, ±5%, 33K 50-33045 R90 Resistor 1/4W, ±5%, 1M 50-10065 R91 Resistor 1/4W, ±5%, 1M 50-10065 R92 Resistor 1/4W, ±5%, 33K 50-33045 R93 Resistor 1/4W, ±5%, 10K 50-10045 R94 Resistor 1/4W, ±5%, 10K 50-10045 R95 Resistor 1/4W, ±5%, 47K 50-47045 R96 Resistor 1/4W, ±5%, 47K 50-47045 R97 Resistor 1/4W, ±5%, 47K 50-47045 R98 Resistor 1/4W, ±5%, 100K 50-10055 R99 Resistor 1/4W, ±5%, 4.7K 50-47035 R100 Resistor 1/4W, ±5%, 4.7K 50-47035 R101 Resistor 1/4W, ±5%, 47K 50-47045 R102 Resistor 1/4W, ±5%, 100K 50-10055 R104 Resistor 1/4W, ±5%, 33K 50-33045 R105 Resistor 1/4W, ±5%, 150K 50-15055 R106 Resistor 1/4W, ±5%, 22K 50-22045 R107 Resistor 1/4W, ±5%, 22K 50-22045 R108 Resistor 1/4W, ±5%, 22K 50-22045 R109 Resistor 1/4W, ±5%, 22K 50-22045 R110 Resistor 1/4W, ±5%, 1K 50-10035 R111 Resistor 1/4W, ±5%, 1K 50-10035 R112 Resistor 1/4W, ±5%, 100K 50-10055 R113 Resistor 1/4W, ±5%, 10K 50-10045 R120 Resistor 1/4W, ±5%, 1M 50-10065 R121 Resistor 1/4W, ±5%, 47K 50-47045 R122 Resistor 1/4W, ±5%, 2.2K 50-22035 R123 Resistor 1/4W, ±5%, 100Ω 50-10025 R124 Resistor 1/4W, ±5%, 33K 50-33045 R125 Resistor 1/4W, ±5%, 1M 50-10065 R126 Resistor 1/4W, ±5%, 47K 50-47045 R128 Resistor 1/4W, ±5%, 5.6K 50-56035 R129 Resistor 1/4W, ±5%, 100K 50-10055 R135 Resistor 1/4W, ±5%, 10Ω 50-10015 R137 Resistor 1/4W, ±5%, 10Ω 50-10015 R138 Resistor 1/4W, ±5%, 10K 50-10045 R141 Resistor 1/4W, ±5%, 220K 50-22055 R142 Resistor 1/4W, ±5%, 33K 50-33045 R143 Resistor 1/4W, ±5%, 1K 50-10035 R144 Resistor 5W, ±5%, 5Ω 55-05025 R145 Resistor 1/4W, ±5%, 300K 50-30055 R147 Resistor 1/4W, ±5%, 47K 50-47045 R148 Resistor 1/4W, ±5%, 10K 50-10045 R150 Resistor 1/4W, ±5%, 68K 50-68045 R153 Resistor 1/4W, ±5%, 2.2K 50-22035 R158 Resistor 1/4W, ±5%, 33K 50-33045 R159 Resistor 1/4W, ±5%, 68K 50-68045 R160 Resistor 1/4W, ±5%, 68K 50-68045 R211 Resistor 1/4W, ±5%, 150Ω 50-15025 R215 Resistor 1/4W, ±5%, 22K 50-22045 R216 Resistor 1/4W, ±5%, 15K 50-15045 R217 Resistor 1/4W, ±5%, 4.7K 50-47035 R218 Resistor 1/4W, ±5%, 47K 50-47045 R219 Resistor 1/4W, ±5%, 4.7K 50-47035 R220 Resistor 1/4W, ±5%, 100Ω 50-10025 R221 Resistor 1/4W, ±5%, 100Ω 50-10025 R222 Resistor 1/4W, ±5%, 4.7K 50-47035 R223 Resistor 1/4W, ±5%, 680Ω 50-68025

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL! THIS UNIT CONTAINS HIGH VOLTAGE INSIDE!

R224 Resistor 1/4W, ±5%, 4.7K 50-47035 R225 Resistor 1/4W, ±5%, 2.2K 50-22035 R226 Resistor 1/4W, ±5%, 1K 50-10035 R227 Resistor 1/4W, ±5%, 680Ω 50-68025 R228 Resistor 1/4W, ±5%, 2.2K 50-22035 R229 Resistor 1/2W, ±5%, 4.7Ω 52-47005 R230 Resistor 1/4W, ±5%, 150Ω 50-15025 R231 Resistor 1/2W, ±5%, 4.7Ω 52-47005 R232 Resistor 5W, ±5%, 0.22Ω 55-02205 R233 Resistor 5W, ±5%, 0.22Ω 55-02205 R234 Resistor 5W, ±5%, 0.22Ω 55-02205 R235 Resistor 5W, ±5%, 0.22Ω 55-02205 R236 Resistor 1/4W, ±5%, 15K 50-15045 R237 Resistor 1/4W, ±5%, 10K 50-10045 R238 Resistor 1/4W, ±5%, 100K 50-10055 R239 Resistor 1/4W, ±5%, 100K 50-10055 R240 Resistor 1/4W, ±5%, 33K 50-33045 R241 N/U R242 N/U R244 Resistor 5W, ±5%, 5Ω 55-05025 R250 Resistor 2W, ±5%, 10Ω 54-10015 R305 Resistor 1/4W, ±5%, 39K 50-39045 R306 Resistor 1/4W, ±5%, 39K 50-39045 R307 Resistor 1/4W, ±5%, 470K 50-47055 R308 Resistor 1/4W, ±5%, 470K 50-47055 R309 Resistor 1/4W, ±5%, 22K 50-22045 R310 Resistor 1/4W, ±5%, 22K 50-22045 R311 Resistor 1/4W, ±5%, 20K 50-20045 R312 Resistor 1/4W, ±5%, 6.8K 50-68035 R313 Resistor 1/4W, ±5%, 2.2M 50-22065 R314 Resistor 1/4W, ±5%, 20K 50-20045 R315 Resistor 1/4W, ±5%, 10K 50-10045 R316 N/U R317 Resistor 1/4W, ±5%, 22K 50-22045 R318 Resistor 1/4W, ±5%, 1K 50-10035 R319 Resistor 1/4W, ±5%, 10K 50-10045 R320 Resistor 1/4W, ±5%, 10K 50-10045 R321 Resistor 1/4W, ±5%, 27K 50-27045 R322 Resistor 1/4W, ±5%, 5.6K 50-56035 R323 Resistor 1/4W, ±5%, 470K 50-47055 R324 Resistor 1/4W, ±5%, 10K 50-10045 R325 Resistor 1/4W, ±5%, 1K 50-10035 R326 Resistor 1/4W, ±5%, 4.7K 50-47035 R327 Resistor 1/4W, ±5%, 22K 50-22045 R328 Resistor 1/4W, ±5%, 220Ω 50-22025 R329 Resistor 1/4W, ±5%, 10K 50-10045 R331 Resistor 1/4W, ±5%, 100K 50-10055 R411 Resistor 1/4W, ±5%, 150Ω 50-15025 R415 Resistor 1/4W, ±5%, 22K 50-22045 R416 Resistor 1/4W, ±5%, 15K 50-15045 R417 Resistor 1/4W, ±5%, 4.7K 50-47035 R418 Resistor 1/4W, ±5%, 47K 50-47045 R419 Resistor 1/4W, ±5%, 4.7K 50-47035 R420 Resistor 1/4W, ±5%, 100Ω 50-10025 R421 Resistor 1/4W, ±5%, 100Ω 50-10025 R422 Resistor 1/4W, ±5%, 4.7K 50-47035 R423 Resistor 1/4W, ±5%, 680Ω 50-68025 R424 Resistor 1/4W, ±5%, 4.7K 50-47035 R425 Resistor 1/4W, ±5%, 2.2K 50-22035 R426 Resistor 1/4W, ±5%, 1K 50-10035 R427 Resistor 1/4W, ±5%, 680Ω 50-68025 R428 Resistor 1/4W, ±5%, 2.2K 50-22035 R429 Resistor 1/2W, ±5%, 4.7Ω 52-47005 R430 Resistor 1/4W, ±5%, 150Ω 50-15025 R431 Resistor 1/2W, ±5%, 4.7Ω 52-47005 R432 Resistor 5W, ±5%, 0.22Ω 55-02205 R433 Resistor 5W, ±5%, 0.22Ω 55-02205 R434 Resistor 5W, ±5%, 0.22Ω 55-02205 R435 Resistor 5W, ±5%, 0.22Ω 55-02205 R436 Resistor 1/4W, ±5%, 15K 50-15045 R437 Resistor 1/4W, ±5%, 10K 50-10045 R438 Resistor 1/4W, ±5%, 100K 50-10055 R439 Resistor 1/4W, ±5%, 100K 50-10055 R440 Resistor 1/4W, ±5%, 33K 50-33045 R441 N/U R442 N/U R450 Resistor 2W, ±5%, 10Ω 54-10015 R519 Resistor 5W, ±5%, 100Ω 55-10020 R528 Resistor 1/4W, ±5%, 10K 50-10045 S1 Switch, DPDT Vert 25-02201 S2 Switch, DPDT Vert 25-02201 S3 Switch, DPDT Vert 25-02201 S4 Switch, DPDT Vert 25-02201 S5 Switch, DPDT Vert 25-02201 S6 Switch, DPDT Vert 25-02201 S7 Switch, DPDT Vert 25-02201 S9 Switch, DPDT Vert 25-02201 U2 DIP IC, MC14049UBCP Hex Inverter 60-40490 V1 Tube Socket, 9 Pin, 12AX7A 23-91632

12AX7A, Twin Triode 65-00127

VR1 Voltage Regulator, 7815 +15V 60-78150

Heatsink T0-220, Vert 12-57462

VR2 Voltage Regulator, 7915 -15V 60-79150

Heatsink T0-220, Vert 12-57462 VR3 Voltage Regulator, 7912 -12V 60-79120 Z1 Zener Diode, 5.1V, 1N4733A, 1W 61-04733

FAN DC24V 80x80x25mm 42cfm 70-02408

CARVIN ENGINEERING DA TA OPERATING MANUAL

R600/R1000 HEAD/RL6815 CYCLOPS /RC210 RED EYE

Congratulations on your decision to purchase the new Red Line Series bass amp. The Red line Series of products represent Carv i n ’s commitment to producing the state of the art in professional bass technology. All Red Line amplifiers offer a hybrid 12AX7 tube pre-amp which gives the player a choice of a clean or vintage sound at the turn of a knob. The light-weight and compact design is complemented by heavy duty construction perfectly suited for the rigors of road use. This manual covers the R600 and R1000 head, “Cyclops” and “Red Eye” (combo) amplifiers.

GETTING STARTED QUICKLY

If you are like most players, you probably want to plug in your new amp and get started playing right away. However, with a sophisticated amp like the R600/R1000, the setup must be right or you will experience unsatisfactory results. Before you start, be sure your amp is plugged into the correct AC voltage.

1. Plug your bass guitar into the ACTIVE (bass with preamp) or PASSIVE (bass with no battery) input jack. With your bass full on and playing hard, be sure the CLIP led next to the input jacks is not flashing (very dim flashing is OK) or preamp distortion will result. Use the ACTIVE input if your instrument continues to cause clipping.

2. The INPUT GAIN control should be set at its center “0” position. The master AMP 1 & 2 and VOLUME levels should be set at their center “5” position. If these setting are too loud, then bring all three down proportionally. However, the GAIN control should be kept at “0” for the best signal to noise performance. Note, the GAIN control does not turn the guitar off.

3. Set the COMPRESSOR & GATE to their off position. Read about their function later.

4. Set the LOW, MID SWEEP and HIGH tone controls to their off center “0” position. Adjust later after you are more familiar with the amp.

5. Set the 9 EQ bands to their “0” center positions and adjust later if needed. The EQ switch can also be used to defeat the EQ.

6. Set the guitar’s level about 1/2 and turn the master VOLUME OFF. Now, turn the amp ON and gradually raise the master VOLUME (set the input GAIN at “0” & the AMP 1 & 2 at “5”). Re-adjust the guitar and these masters according to the desired volume. If you require full output, then raise these master controls to 10. Never try to get full power by pushing the input GAIN control to its maximum and keeping the master AMP 1 & 2 and VOLUME below 5.

7. Your tone shaping should start with the PRE-SHAPE filters. You can use the tone controls and the 9-band graphic EQ as more tone variation is required. It is not recommended to add a lot of bass if the pre-shape bass filter is used especially at high levels because early clipping can occur. Use moderation when dialing in tone.

8. Use the built-in COMPRESSOR to limit peaks. This will help you to get more power from your amp.

9. Biamping the CYCLOPS combo or any large bass stacks requires careful balancing of the AMP 1 & 2 controls. These amp controls power the woofer and midrange/tweeter independently. Double check to see that the speaker’s components are plugged into the correct amp jacks. If the cables are reversed (feeding the wrong speakers), or the BRIDGE switch is inadvertently pushed in, or the front BIAMP switch or X-OVER frequency is incorrectly set, your amp will not perform correctly. Carefully checking these items will help prevent service calls.

10. Need more power? Even though the R600/R1000 is a powerful amp, adding more speakers is the only way for substantially more output. Every time you double your speakers, your acoustic output goes up by a factor of four. This is far more efficient than trying to add 4 times the power especially when speakers become less efficient when driving them harder. Bridging your amp into a 4 ohm system will give you more output. However, use caution because speakers can be be damaged from its high output.

H o p e f u l l y, this will help you get started. Have fun exploring the many new features and sounds

of the R600/R1000. Take your time because you’re new amp has a lot of potential if properly setup!

76-4000 0798

RECEIVING INSPECTION—read before getting start e d

INSPECT YOUR UNIT FOR ANY DAMAGE which may have occurred during shipping. If any

damage is found, please notify the shipping company and CARVIN immediately.

S AVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit, always use the original carton and packing material. This will provide the best possible protection during shipment. CARVIN and the shipping company are not liable for any damage caused by improper packing.

S AVE YOUR INVOICE. It will be required for warranty service if needed in the future.

SHIPMENT SHORTAGE. If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual for your records. Keep your portion of the card and return the portion with your name and comments to us.

DESIGNED FOR TOURING

Every R600 is made from heavy-duty 16 gauge steel that is galvanized before being painted to prevent rust. All internal cabling is neatly tied and harnessed. Every circuit card is MIL SPEC, double-sided, through-hole plated, fire retardant FR-4 glass epoxy. This insures that the solder flows on the top, bottom and through each hole of every component, preventing components from shaking loose. Toroid transformers are used as they are the engineer’s choice for greater power supply current while reducing weight and magnetic “hum” fields.

R600/R1000 RED LINE SPECIFICATIONS:

Output Power R 6 0 0 R 1 0 0 0

8 Ω THD < 1% 1 7 5 / 1 7 5 w 2 2 5 / 2 2 5 w 4 Ω THD < 1% 2 5 0 / 2 5 0 w 3 5 0 / 3 5 0 w 2 Ω THD < 1% 3 0 0 / 3 0 0 w 5 0 0 / 5 0 0 w 8Ω Bridged THD < 1% 5 0 0 w 7 0 0 w 4Ω Bridged THD <1% 6 0 0 w 1 0 0 0 w

Input Impedance (passive input) 1 M Ω Pre-Shape EQ. Low Boost: +8dB @ 80Hz

Main EQ. Low ±12dB @ 100Hz

(active input) 200k Ω

Mid Shift: 250 Hz or 475 Hz @-12dB

Hi Boost: +7dB @ 6kHz

Mid Sweep ±12dB @ 200Hz-2kHz

High ±12dB @ 8kHz

Graphic EQ Freq. 50, 80, 125, 250, 500, 800, 1.3k, 2.6k, 5k C o m p r e s s o r Variable Threshold Range (-10dB to -35dB)

Variable Ratio Range (1.3 to 1) to (5 to 1)

Noise Gate Variable Threshold Range off to -30dB C r o s s o v e r 12dB per Octave Sweepable 200Hz to 2kHz D i m e n s i o n s 3 1/2” High x 19” Wide x 10” Deep Shipping Weight with SV2 Duratuff II™ cabinet R600: 30 lbs. R1000:36 lbs Wa r r a n t y One year parts and labor unless otherwise state

For your records, you may wish to record the following information. Serial No._____________________ Invoice Date_______________

12340 World Trade Drive, San Diego, CA 92128

(619) 487-1600 (800) 854-2235

www.carvin.com

+ 2 hidden pages