Carrier 38MVC009-1, 40MVC009-1, 38MVC012-1, 40MVC012-1, 38MVC012-3 Product Data

40MVC / 38MVC
40MVQ / 38MVQ
High---Wall D uct Free Split System
Sizes 009 to 024

Product Data

INDUSTRY LEADING
FEATURES / BENEFITS

AN INEXPENSIVE AND CREATIVE
SOLUTION TO DESIGN PROBLEMS.

The 38/40MVC(Q) series duct--free split systems are a matched
combination of an outdoor condensing unit and an indoor fan coil
unit connected only by refrigerant tubing and wires.

The fan coil is mounted on the wall, near the ceiling. This
selection of fan coils permits inexpensive and creative solutions to
design problems such as:

the environmentally sound refrigerant

The ideal compliment to your ducted system when it is impractical
or prohibitively expensive to use ductwork.

S Add--ons to current space (an office or family room

addition)

S Special space requirements

S When changes in the load cannot be handled by the

existing system.

S When adding air conditioning to spaces that are heated

by hydronic or electric heat and have no ductwork.

S Historical renovations or any application where

preserving the look of the original structure is essential.

These compact indoor fan coil units take up very little space in the
room and do not obstruct windows. The fan coils are attractively
styled to blend with most room decors. Advanced system
components incorporate innovative technology to provide reliable
cooling performance at low sound levels.

LOW SOUND LEVELS

When noise is a concern, the duct--free split systems are the answer.
The indoor units are whisper quiet. There are no compressors
indoors, either in the conditioned space or directly over it, and
there is none of the noise usually generated by air being forced
through ductwork.

When sound ordinances and proximity to neighbors demand quiet
operation, the 38MVC,MVQ unit is the right choice: The
advanced, horizontal airflow design distributes air more evenly
over the coil.

SECURE OPERATION

If security is an issue, outdoor and indoor units are connected only
by refrigerant piping and wiring to prevent intruders from crawling
through ductwork. In addition, since 38MVC,MVQ units can be
installed close to an outside wall, coils are protected from vandals
and severe weather.

FAST INSTALLATION

This compact duct--free split system is simple to install. A
mounting bracket is standard with the indoor units and only wire
and piping need to be run between indoor and outdoor units. These
units are fast and easy to install ensuring minimal disruption to
customers in the home or workplace. This makes the

38/40MVC, MVQ

38/40MVC,MVQ duct--free split systems the equipment of choice,
especially in retrofit situations.

SIMPLE SERVICING AND
MAINTENANCE

Removing the top panel on outdoor units provides immediate
access to the control compartment, providing a service technician
access to check unit operation. In addition, the draw--thru design of
the outdoor section means that dirt accumulates on the outside
surface of the coil. Coils can be cleaned quickly from the inside
using a pressure hose and detergent.

On all indoor units, service and maintenance expense is reduced
due to easy--to--use cleanable filters. In addition, these high wall
systems have extensive self--diagnostics to assist in
troubleshooting.

BUILT--IN RELIABILITY

Duct--free split system indoor and outdoor units are designed to
provide years of trouble--free operation.

The high wall indoor units include protection against freeze--up
and high evaporator temperatures on heat pumps.

The condensing units and heat pumps are also protected. There is
a three minute time delay before the compressor will start. The
compressor is also protected by the over--current protection. On
size 18k and 24k heat pumps, there is high temperature protection.

INDIVIDUAL ROOM COMFORT

Maximum comfort is provided because each space can be
controlled individually based on usage pattern. The air sweep
feature provided permits optimal room air mixing to eliminate hot
and cold spots for occupant comfort. In addition, year--round
comfort can be provided with heat pumps.

ECONOMICAL OPERATION

The duct--free split system design allows individual room heating
or cooling when required. There is no need to run large supply--air
fans or chilled water pumps to handle a few spaces with unique
load patterns. In addition, because air is moved only in the space
required, no energy is wasted moving air through ducts.

EASY--TO--USE CONTROLS

The high--wall units have microprocessor--based controls to
provided the ultimate in comfort and efficiency. The user friendly
wireless remote control provides the interface between user and the
unit.

ACCESSORIES

Customizing these duct--free split systems to your application is
easily accomplished. Low--ambient temperature capability
(permitting cooling operation down to --20_F (--28.89_C)outdoor
ambient) is easily added on all units.

Adding a condensate pump accessory to the high wall fan coil
provides installation flexibility.

AGENCY LISTINGS

All systems are listed with ARI (Air Conditioning & Refrigeration
Institute), and ETL.

2

MODEL NUMBER NOMENCLATURE

INDOOR UNIT

40 MVC 3---01

Fan C oil U nit

Unit Type
MVC --- C o o l i n g O n l y
MVQ --- H e a t P u m p

018

Nominal Capacity
009 --- 3 / 4 To n
012 --- 1 To n
018 --- 1 --- 1 / 2 Ton
024 --- 2 To n s

---

Volt age

--- --- 3 0 V D C
1 --- 1 1 5 --- 1 --- 6 0
3 --- 208/230--- 1 --- 60

Air---Cooled Condenser

OUTDOOR UNIT

38 MVC 3---01

Unit Type
MVC --- C o o l i n g O n l y
MVQ --- H e a t P u m p

Use of the AHRI Certified
TM Mark indicates a
manufacturer’s
participation in the
program For verification
of certification for individual
products, go to
www.ahridirectory.org.

018

Nominal Capacity
009 --- 3 / 4 To n
012 --- 1 To n
018 --- 1 --- 1 / 2 Ton
024 --- 2 To n s

---

Volt age
1--- 1 1 5 --- 1 --- 6 0
3--- 208/230--- 1--- 60

38/40MVC, MVQ

3

STANDARD FEATURES AND ACCESSORIES

Ease Of Installation

Mounting Brackets S
Low Voltage Controls S

Comfort Features

Microprocessor Controls S
Wireless Remote Control S
Automatic Air Sweep S
Air Direction Control S
Auto Restart Function S
Cold Blow Protection On Heat Pumps S
Turb o Mo d e On Size s 9K a n d 12 K S
Auto Changeover On Heat Pumps S

Energy Saving Features

Sleep Mode S
Stop/Start Timer S

Safety And Reliability

3MinuteTimeDelayForCompressor S
Over Current Protection For Compressor S
Indoor Coil Freeze Protection S
Indoor Coil High Temperature Protection On Heat Pumps S
Condenser High Temperature Protection On heat Pumps{ S
Accumulator On Heat Pumps S

Ease Of Service And Maintenance

38/40MVC, MVQ

Cleanable Filters S
Diagnostics S
Liquid Line Pressure Taps S
Suction And Discharge Pressure Taps (Sizes 18 and 24K) S

Application Flexibility

Low Ambient Controls (--- 20° F) A
Condensate Pumps A
Crankcase Heater A
Wind Baffles F

Warranty

5 ---Year Compressor Warranty S
1 --- Parts Warranty S
Compressor Extended Warranty Years 6 Thru 10 O
All Parts And Labor Years 2 Thru 5 O
All Parts And Labor Years 2 Thru 5, Compressor Years 6

Thru 10

{ Sizes 18k & 24k

Legend

SStandard
A Accessory
OOptional
F Field Fabricated

O

INDOOR UNITS

A07892

Fig. 1 – Condensate Pump Accessory

On high wall fan coils, the condensate pump has a lift capability of
12 ft (3.6 m) on the discharge side with the pump mounted in the
fan coil or 6 ft (1.8 m) on the suction side if the pump is remote
mounted. The pump is recommended when adequate drain line
pitch cannot be provided, or when the condensate must move up to
exit.

NOTE: An external 115v power source will be required to run the
pump on unit sizes 9k and 12k.

OUTDOOR UNITS
LOW AMBIENT KIT

The kit controls condenser fan cycling using a pressure switch. It is
specifically designed to control fan--motor cycles in response to
saturated condensing pressure. This device maintains a constant
saturated condensing temperature of 100 _F ± 10 _F (37.78_C ±

--12.22 _C) at outdoor--air temperatures between 55 _F and --20 _F
(12.78_C ± --12.22_C), and can be used on all outdoor units
without changing the outdoor fan motor.

CRANKCASE HEATER

Available for units with rotary compressors. Heater clamps around
compressor oil sump. Recommended for low--ambient applications
on sizes 9, 12 , 18, 24 and long line applications.

AHRI* CAPACITY RATINGS

OUTDOOR

SECTION

3 8 M V C 0 0 9 --- --- --- 1 4 0 M V C 0 0 9 --- --- --- 1 1000 325 9,200 13 N/A N/A
3 8 M V C 0 1 2 --- --- --- 1 4 0 M V C 0 1 2 --- --- --- 1 1000 425 11,400 13 N/A N/A
3 8 M V C 0 1 2 --- --- --- 3 4 0 M V C 0 1 2 --- --- --- 3 1000 425 11,800 13 N/A N/A
3 8 M V C 0 1 8 --- --- --- 3 4 0 M V C 0 1 8 --- --- --- 3 1600 630 17,500 13 N/A N/A
3 8 M V C 0 2 4 --- --- --- 3 4 0 M V C 0 2 4 --- --- --- 3 1600 750 22,000 13 N/A N/A
3 8 M V Q009 --- --- --- 1 4 0 M V Q 0 0 9 --- --- --- 1 1000 325 9,600 13 9,400 7.7
3 8 M V Q012 --- --- --- 1 4 0 M V Q 0 1 2 --- --- --- 1 1000 425 11,500 13 11,500 7.7
3 8 M V Q012 --- --- --- 3 4 0 M V Q 0 1 2 --- --- --- 3 1000 425 12,000 13 11,500 7.7
3 8 M V Q018 --- --- --- 3 4 0 M V Q 0 1 8 --- --- --- 3 1600 560 17,500 13 17,000 7.7
3 8 M V Q024 --- --- --- 3 4 0 M V Q 0 2 4 --- --- --- 3 1600 750 22,500 13 21,500 7.7

*Air Conditioning, Heating & Refrigeration Institute

Legend
HSPF --- Heating Seasonal Performance Factor
SEER --- Seasonal E n ergy Efficiency Ratio
NOTES:

1. Ratings are net values reflecting the effects of circulating fan heat. Ratings are based on: Cooling Standard: 80_F (26.67_C) db, 67_F (19.44_C) wb air
entering indoor unit and 95_F(35_C) db air entering outdoor unit. High Temperature Heating Standard: 70_F (21.11_C) db air entering indoor unit and 47_F
(8.33_C) db, 43_F (6.11_C) wb air entering outdoor unit.

2. Ratings are based on 25 ft. (7.62 m) of interconnecting refrigerant lines.

3. All system ratings are based on fan coil units operating at high fan speed. Consult Physical Data tables for airflows at all available fan speeds.

INDOOR

SECTION

STANDARD CFM

Outdoor Indoor BTUH HSPF

COOLING BTUH SEER

HIGH HEAT

4

DIMENSIONS -- INDOOR

Model Size

9K 32.09 (815) 11.02 (280) 7.68 (195)
12K 35.67 (906) 11.26 (286) 9.25 (235)
18K 49.21 (1250) 12.80 (325) 9.06 (230)
24K 49.21 (1250) 12.80 (325) 9.06 (230)

in. (mm)

DIMENSIONS -- OUTDOOR

A07336

W

H

in. (mm)

D

in. (mm)

Operating Weight lb (kg)

17.6 (8)

25.3 (11.5)

39.6 (18)

39.6 (18)

Air Flow

H

L1

L2

L3

35

Model Size

9K 30.71 (780) 21.26 (540) 21.61 (549) 11.81 (300) 10.87 (276)
12K 29.92 (760) 23.23 (590) 20.87 (530) 12.40 (315) 11.42 (290)
18K 33.07 (840) 27.36 (695) 22.05 (560) 14.17 (360) 13.19 (335)
24K 35.00 (889) 33.50 (851) 23.11 (588) 13.98 (355) 13.11 (333)

W

in. (mm)

H

in. (mm)

L1

in. (mm)

L2

in. (mm)

SERVICE VALVE LOCATIONS

9K

12K

18K

W

L3

in. (mm)

24K

Operating Weight

lb (kg)

Cooling Only

70.4 (32) 72.6 (33)

79.2 (36) 83.6 (38)

116.6 (53) 117.7 (53.5)

149.6 (68) 151 (68.5)

Operating Weight

Heat Pumps

38/40MVC, MVQ

A07337

lb (kg)

J

Service Valve Locations

J 3.46 (88) 3.19 (81) 3.46 (88) 4.02 (102)
K 3.46 (88) 5.63 (143) 3.62 (92) 6.57 (167)

in. (mm)

9K

K

12K

in. (mm)

J

K

18K

in. (mm)

K

J

A07376a

24K

in. (mm)

J

K

5

CLEARANCES -- INDOOR

38/40MVC, MVQ

CLEARANCES -- OUTDOOR

5

"

(0.13m)

min.

6" (0.15m) min.

(1.8m)

6'

Fig. 2 – Indoor unit clearance

5

"

(0.13m)

min.

A07891

A

D

UNIT 9k and 12k in. (mm)

A 24 (610)

B 24 (610)
C 24 (610)

D 6 (152)
E 12 (305)

B

Fig. 3 – Outdoor Unit Clearance

Air-inlet

E

C

Air-outlet

A07894

18k and 24k in. (mm)

24 (610)
36 (914)
24 (610)

6 (152)

12 (305)

6

PHYSICAL DATA

Outdoor Unit 38MVC 009 012 012 018 24

System Voltage 115 V 115 V 208/230 208/230 208/230
Nominal Capacity (Btuh) 9000 12000 12000 18000 24000
Operating Weight lb(kg) 70.4(32) 79.2(36) 79.2(36) 116.6(53) 149.6(68)
Refrigerant Type R--- 410A
Metering Device Capillary Tube at Outdoor
Charge lb (kg) 2.3 (1.0) 2.9 (1.3) 3.0 (1.4) 4.4 (2.0) 5.3 (2.4)
Compressor

Type Rotary
Model EA82X1C--- 1FZDU1 EA108X1C--- 1FZDU1 PA108X1C---3FZDU PA150X2CS--- 3KUU PA200X2CS ---3MUU
O il C h a r g e ( POE --- o z ) 11.8 11.8 11.8 25.4 25.4

Outdoor Fan

Rpm 900 900 900 840 740
Diameter (in) .. No. of Blades 15.8 … 3 15.8 … 3 15.8 … 3 18.1 … 3 18.1 … 3
Motor (watts / hp) 23 / 0.102 23 / 0.102 23 / 0.102 53 / 0.224 100 / 0.218

Outdoor Coil

Face Area ( sq. ft) 4.05 3.94 3.94 5.51 6.67
No. Rows 2 2 2 4 3
Fins per inch 17 17 17 18 18
Circuits 4 4 4 4 6

Refrigerant Lines

Connection Type Flare
Liquid (Mix Phase) (in) OD 1/4” 1/4” 1/4” 1/4” 3/8”
Vapor Line (in) OD 3/8” 1/2” 1/2” 1/2” 5/8”
Maximum Length* ft (m) 65 (20.0) 65 (20.0) 65 (20.0) 100 (30.4) 100 (30.4)
MaxLift(FanCoilAbove)ft(m) 35 (10.7) 35 (10.7) 35 (10.7) 50 (12.2) 60 (18.3)
Max Drop (Fan Coil Below)ft (m) 35 (10.7) 35 (10.7) 35 (10.7) 50 ( 12.2) 60 (18.3)

Controls

Control Voltage 13 VDC 13 VDC 13 VDC Pulse DC Pulse D C

External Finish White White White White White

38/40MVC, MVQ

Outdoor Unit

38MVQ

System Voltage 115 V 115 V 208/230 208/230 208/230
Nominal Capacity (Btuh) 9000 12000 12000 18000 24000
Operating Weight lb(kg) 72.6 (33) 83.6 (38) 83.6 (38) 117.7 (53.5) 151.0 (68.5)
Refrigerant Type R--- 410A
Metering Device Capillary Tube at Outdoor
Charge lb (kg) 2.4 (1.1) 3.0 (1.4) 3.0 (1.4) 4.5 (2.0) 5.3 (2.4)
Compressor

Type Rotary
Model EA82X1C---1FZDU1 EA108X1C---1FZDU1 PA108X1C --- 3FZDU PA150X2CS --- 3KUU PA200X2CS--- 3MUU
O il C h a r g e ( POE --- o z ) 11.8 11.8 11.8 25.4 25.4

Outdoor Fan

Rpm 900 900 900 840 740
Diameter (in) .. No. of Blades 15.8 … 3 15.8 … 3 15.8 … 3 18.1 … 3 18.1 … 3
Motor (watts / hp) 23 / 0.102 23 / 0.102 23 / 0.102 53 / 0.224 100 / 0.218

Outdoor Coil

Face Area ( sq. ft) 4.05 3.94 3.94 5.51 6.67
No. Rows 2 2 2 2 3
Fins per inch 17 18 18 18 18
Circuits 4 4 4 4 6

Refrigerant Lines

Connection Type Flare
Liquid Line (in) OD 1/4” 1/4” 1/4” 1/4” 3/8”
Vapor Line (in) OD 3/8” 1/2” 1/2” 1/2” 5/8”
Maximum Length* ft (m) 65 (20.0) 65 (20.0) 65 (20.0) 100 (30.4) 100 (30.4)
MaxLift(FanCoilAbove)ft(m) 35 (10.7) 35 (10.7) 35 (10.7) 50 (12.2) 60 ( 18.3)
Max Drop (Fan Coil Below)ft (m) 35 (10.7) 35 (10.7) 35 (10.7) 50 (12.2) 60 (18.3)

Controls

Control Voltage 13 VDC 13 VDC 13 VDC Pulse D C Pulse DC

Finish White White White White White

* Refer to Long Line Application section on page 21

009 012 012 018 024

7

PHYSICAL DATA (CONT.)

Indoor Unit 40MVC 009 012 018 024

System Voltage 115 115 or 208/230 208/230 208/230
Nominal Capacity (Btuh) 9000 12000 18000 24,000
Operating Weight lb(kg) 17.6(8) 25.3(11.5) 39.6(18) 39.6(18)
Refrigerant Type R--- 410A
Metering Device Capillary Tube at Outdoor
Charge (lb) 2.3(1.0) 2.9(1.3) 4.4(2.0) 5.3(2.4)
Indoor Fan

Rpm/Cfm (High) 1250/325 1270/425 1070/630 1070/750
Rpm/Cfm (Medium) 1000/260 1100/365 1000/570 1000/660
Rpm/Cfm (Low) 800/190 1000/340 960/500 960/ 585
Motor (Watts / hp) 20 / .034 25 / .044 31 / .075 50 / .112
Blower Diameter … Length (in) 3.84 … 25.87 4.17 … 25.2 4.21 … 37.6 4.21 … 37.6

Indoor Coil

Face Area ( sq. ft) 2.15 2.54 4.36 4.36
No. Rows 2 2 2 2
Fins per inch 19.5 19.5 19.5 19.5
Circuits 2 3 6 6

Controls Integrated Microprocessor

Remote Controller Wireless
Fan Mode High/Medium/Low/Auto
Turb o M o de Ye s Yes No No
Dehumidification Mode Ye s
Sleep Mode Ye s
Diagnostics Ye s

38/40MVC, MVQ

Timer Mode Ye s
Freeze Protection Ye s
Tes t Mo de Ye s
Auto Restart Yes
Auto Sweep Ye s
Control Voltage 13 VDC 13 VDC Pulse DC Pulse D C

Refrigerant Lines

Connection Type Flare
Liquid Line (in) OD 1/4” 1/4” 1/4” 3/8”
Vapor Line (in) OD 3/8” 1/2” 1/ 2” 5/8”
Maximum Length ft(m)* 65(19.8) 65(19.8) 100(30.5) 100(30.5)
Max Lift (Fan Coil Above) ft(m) 35(10.7) 35(10.7) 50(15.2) 60(18.3)
Max Drop (Fan Coil Below) ft(m) 35(10.7) 35(10.7) 50(15.2) 60(18.3)

Condensate Drain

Size (in) .65 (OD) .53 (ID) .65 (OD) .53 (ID) .65 (OD) .53 (ID) .65 (OD) .53 ( ID)

External Finish White White White White

* Refer to Long Line Application section on page 21

8

PHYSICAL DATA (CONT.)

Indoor Unit 40MVQ 009 012 018 024
System Voltage 115 115 or 208/230 208/230 208/230
Nominal Capacity (Btuh) 9000 12000 18000 24000
Operating Weight lb (kg) 17.6 (8) 25.3 (11.5) 39.6 (18) 39.6 (18)
Refrigerant Type R--- 410A
Metering Device Capillary Tube at Outdoor
Charge lb (kg) 2.35 (1.1) 3.0 (1.4) 4.5 (2.0) 5.3 (2.4)
Indoor Fan

Rpm/Cfm (High) 1250/325 1270/425 1070/630 1070/750
Rpm/Cfm (Medium) 1000/260 1100/365 1000/570 1000/660
Rpm/Cfm (Low) 800/190 1000/340 960/500 960/585
Motor (Watts / hp) 20 / .034 25 / .044 31 / .075 50 / .112
Blower Diameter … Length (in) 3.84 … 25.87 4.17 … 25.2 4.21 … 37.6 4.21 … 37.6

Indoor Coil

Face Area ( sq. ft) 2.15 2.54 4.36 4.36
No. Rows 2 2 2 2
Fins per inch 19.5 19.5 19.5 19.5
Circuits 2 3 6 6

Controls Integrated Microprocessor

Remote Controller Wireless
Fan M ode High/Medium/Low/Auto
Auto Changeover Ye s
Dehumidification Mode Ye s
Demand Defrost Ye s
Sleep Mode Ye s
Diagnostics Yes
Timer Mode Ye s
Freeze Protection Yes
Tes t Mo de Ye s
Auto Restart Yes
Auto Sweep Ye s
Control Voltage 13 VDC 13 VDC Pulse DC Pulse DC

Refrigerant Lines

Connection Type Flare
Liquid Line (in) OD 1/4” 1/4” 1/4” 3/8”
Vapor Line (in) OD 3/8” 1/2” 1/2” 5/8”
Maximum Length* ft (m) 65 (19.8) 65 (19.8) 100 ( 30.5) 100 (30.5)
MaxLift(FanCoilAbove)ft(m) 35 (10.7) 35 (10.7) 50 (15.2) 60 (18.3)
Max Drop (Fan Coil Below) ft (m) 35 (10.7) 35 (10.7) 50 (15.2) 60 (18.3)

Condensate Drain

Size (in) .65 (OD) .53 (ID) .65 (OD) .53 ( ID) .65 (OD) .53 (ID) .65 (OD) .53 (ID)

External Finish White White White White

* Refer to Long Line Application section on page 21

38/40MVC, MVQ

9

PERFORMANCE DATA

Te m p _F(_C)

Air Entering

38/40MVC, MVQ

Condenser

55

(12.78)

65

(18.33)

75

(23.89)

85

(29.44)

95

(35)

105

(40.56)

115

(46.11)

125

(51.67)

(Edb)

TCG 7.70 8.60 9.37 10.14 9.08 9.34 10.07 10.66 9.75 9.74 10.44 10.93
SHG 7.44 6.61 5.80 4.95 9.08 7.59 6.45 5.29 9.75 8.30 6.95 5.50

TC 7.69 8.58 9.36 10.12 9.07 9.32 10.06 10.65 9.74 9.72 10.42 10.92

kW 0.48 0.48 0.48 0.47 0.48 0.48 0.47 0.47 0.48 0.48 0.47 0.47
CMP 0.39 0.39 0.39 0.38 0.39 0.39 0.38 0.38 0.39 0.39 0.38 0.38
LDB 45.0 48.9 52.8 56.9 48.4 53.5 57.6 61.7 52.9 56.9 60.7 64.8
LWB 40.9 45.6 50.8 56.2 43.3 49.2 54.5 60.2 45.4 51.6 56.9 62.6
TCG 7.40 8.31 9.14 9.95 8.88 9.08 9.87 10.51 9.53 9.50 10.27 10.81
SHG 7.40 6.57 5.71 4.88 8.88 7.55 6.41 5.25 9.53 8.34 6.98 5.51

TC 7.38 8.29 9.13 9.93 8.86 9.07 9.85 10.50 9.52 9.48 10.26 10.80

kW 0.54 0.55 0.55 0.54 0.55 0.55 0.54 0.54 0.55 0.55 0.54 0.54
CMP 0.45 0.45 0.46 0.45 0.46 0.46 0.45 0.45 0.45 0.45 0.45 0.45
LDB 45.1 49.1 53.2 57.2 49.1 53.6 57.7 61.9 53.5 56.7 60.6 64.8
LWB 41.6 46.2 51.2 56.5 43.6 49.6 54.8 60.3 45.7 51.9 57.1 62.7
TCG 7.50 7.94 8.88 9.73 8.56 8.72 9.57 10.33 9.28 9.12 10.00 10.61
SHG 7.50 6.52 5.62 4.80 8.56 7.49 6.33 5.21 9.28 8.24 6.93 5.50

TC 7.49 7.93 8.87 9.71 8.54 8.70 9.55 10.31 9.26 9.10 9.98 10.60

kW 0.61 0.61 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62
CMP 0.52 0.52 0.53 0.52 0.52 0.53 0.53 0.52 0.53 0.53 0.52 0.52
LDB 44.7 49.2 53.6 57.6 50.1 53.8 57.9 62.0 54.2 57.0 60.7 64.8
LWB 41.4 47.0 51.7 56.9 44.1 50.1 55.2 60.6 46.0 52.3 57.4 62.8
TCG 7.20 7.55 8.50 9.42 8.20 8.09 9.25 10.04 8.99 8.72 9.62 10.34
SHG 7.20 6.49 5.52 4.67 8.20 7.34 6.28 5.12 8.99 8.23 6.86 5.44

TC 7.18 7.53 8.48 9.41 8.19 8.07 9.23 10.03 8.97 8.71 9.61 10.33

kW 0.68 0.69 0.69 0.70 0.69 0.69 0.70 0.70 0.70 0.70 0.70 0.70
CMP 0.59 0.59 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60
LDB 46.0 49.3 54.0 58.2 51.3 54.3 58.1 62.3 54.9 57.0 60.9 65.0
LWB 42.1 47.8 52.5 57.5 44.7 51.1 55.6 60.9 46.4 52.7 57.8 63.1
TCG 6.86 7.02 8.06 9.06 7.82 7.63 8.86 9.66 8.57 8.22 9.22 9.98
SHG 6.86 6.37 5.42 4.53 7.82 7.28 6.20 5.00 8.57 8.22 6.83 5.35

TC 6.85 7.00 8.05 9.05 7.80 7.61 8.85 9.64 8.55 8.20 9.21 9.97

kW 0.76 0.76 0.77 0.78 0.77 0.77 0.78 0.78 0.78 0.78 0.78 0.78
CMP 0.66 0.67 0.68 0.69 0.67 0.67 0.68 0.69 0.68 0.68 0.69 0.69
LDB 47.5 49.8 54.4 58.8 52.6 54.4 58.3 62.7 56.0 57.0 60.9 65.2
LWB 42.8 48.9 53.3 58.1 45.3 51.7 56.2 61.4 46.9 53.3 58.2 63.4
TCG 6.40 6.54 7.59 8.70 7.39 7.09 8.26 9.20 8.10 8.10 8.73 9.56
SHG 6.40 6.19 5.28 4.40 7.39 7.09 6.11 4.86 8.10 8.10 6.74 5.26

TC 6.39 6.53 7.58 8.69 7.38 7.07 8.25 9.19 8.08 8.09 8.72 9.54

kW 0.84 0.85 0.86 0.87 0.86 0.85 0.87 0.87 0.86 0.86 0.87 0.87
CMP 0.75 0.75 0.76 0.77 0.76 0.76 0.77 0.77 0.77 0.77 0.77 0.78
LDB 49.6 50.6 55.0 59.4 54.0 55.0 58.6 63.1 57.3 57.3 61.2 65.4
LWB 43.9 49.9 54.2 58.7 46.0 52.5 57.0 61.9 47.5 53.4 58.7 63.8
TCG 5.87 5.81 7.03 8.09 6.91 6.91 7.64 8.67 7.59 7.59 8.01 8.99
SHG 5.87 5.79 5.08 4.18 6.91 6.91 5.97 4.70 7.59 7.59 6.61 5.10

TC 5.85 5.80 7.01 8.08 6.89 6.90 7.63 8.65 7.57 7.57 7.99 8.97

kW 0.93 0.93 0.95 0.96 0.95 0.95 0.96 0.97 0.96 0.96 0.96 0.97
CMP 0.83 0.83 0.85 0.86 0.85 0.85 0.86 0.87 0.86 0.86 0.86 0.87
LDB 52.0 52.4 55.9 60.3 55.6 55.6 59.0 63.6 58.7 58.7 61.5 65.8
LWB 45.0 51.3 55.2 59.7 46.7 52.8 57.8 62.5 48.1 54.0 59.4 64.3
TCG 5.33 5.33 6.22 7.44 6.37 6.37 6.80 8.09 7.03 7.03 7.00 8.35
SHG 5.33 5.33 4.75 3.96 6.37 6.37 5.71 4.54 7.03 7.03 6.31 4.96

TC 5.31 5.31 6.21 7.42 6.35 6.35 6.78 8.07 7.02 7.02 6.99 8.33

kW 1.03 1.03 1.04 1.06 1.04 1.04 1.05 1.07 1.05 1.05 1.05 1.07
CMP 0.93 0.93 0.94 0.96 0.94 0.94 0.95 0.97 0.95 0.95 0.95 0.97
LDB 54.4 54.5 57.3 61.3 57.5 57.5 59.8 64.1 60.2 60.2 62.2 66.2
LWB 46.2 52.3 56.7 60.8 47.6 53.5 58.8 63.2 48.8 54.6 60.4 64.9

57

(13.89)62(16.67)67(19.44)72(22.22)57(13.89)62(16.67)67(19.44)72(22.22)57(13.89)62(16.67)67(19.44)72(22.22)

COOLING CAPACITIES

38MVC(Q)009--1 / 40MVC(Q)009--1

A i r E n t e r i n g E v a p o r a t o r --- C f m / B F

190/0.04 259/0.04 327/0.05

Air Entering Evaporator --- Ewb _F(_C)

LEGEND

BF --- Bypass Factor
CMP --- Compressor
Edb --- Entering Dry Bulb
Ewb --- Entering Wet Bulb
k W --- Tota l Po w e r
LDB --- Leaving Dry Bulb
L WB --- L e a v i n g Wet Bu l b
SHG --- Gross Sensible Capacity (1000 Btu/hour)
TC --- Total Net Cooling Capacity (1000 Btu/hour)

---

NOTES:

1. Direct interpolation is permissible. Do not extrapolate.

2. The SHG is based on 80_F (26.67_C) edb temperature of air

entering indoor coil.
Below 80_F (26.67_C) edb, subtract (corr factor x cfm) from
SHG.
Above 80_F (26.67_C) edb, add (corr factor x cfm) to SHG.

Correction Factor = 1.10 x (1 --- BF) x (edb --- 80).

10

PERFORMANCE DATA (CONT.)

38MVC(Q)012--1 / 40MVC(Q)012--1

Te m p _F(_C)

Air Entering

Condenser

(Edb)

55

(12.78)

65

(18.33)

75

(23.89)

85

(29.44)

95

(35)

105

(40.56)

115

(46.11)

125

(51.67)

57 (13.89)

TCG 11.97 12.10 12.93 13.50 12.26 12.28 13.10 13.60 12.71 12.61 13.33 13.76

SHG 11.97 9.93 8.34 6.68 12.26 10.27 8.58 6.77 12.71 10.96 8.95 6.97

TC 11.94 12.07 12.90 13.47 12.23 12.25 13.07 13.57 12.68 12.58 13.30 13.74

kW 0.63 0.63 0.62 0.62 0.63 0.63 0.62 0.62 0.62 0.62 0.62 0.62

CMP 0.53 0.53 0.53 0.53 0.53 0.53 0.53 0.53 0.53 0.53 0.53 0.53

LDB 48.2 53.5 57.8 62.4 49.8 54.6 58.9 63.5 53.0 56.6 61.0 65.3

LWB 43.2 49.4 54.8 60.6 44.0 50.2 55.7 61.4 45.5 51.7 57.2 62.9

TCG 11.64 11.71 12.64 13.30 11.94 11.91 12.79 13.37 12.44 12.25 13.07 13.52

SHG 11.64 9.78 8.27 6.66 11.94 10.15 8.49 6.73 12.44 10.95 9.02 6.90

TC 11.61 11.68 12.61 13.27 11.91 11.88 12.76 13.34 12.41 12.22 13.04 13.49

kW 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72

CMP 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.62

LDB 49.0 53.9 58.0 62.4 50.6 54.9 59.1 63.5 53.5 56.6 60.8 65.4

LWB 43.6 49.8 55.1 60.8 44.3 50.6 55.9 61.6 45.7 52.1 57.4 63.1

TCG 11.28 11.27 12.27 13.00 11.56 11.45 12.43 13.12 12.07 11.48 12.70 13.25

SHG 11.28 9.63 8.15 6.61 11.56 9.92 8.47 6.75 12.07 10.16 8.94 6.89

TC 11.25 11.24 12.24 12.97 11.53 11.43 12.40 13.09 12.04 11.46 12.67 13.23

kW 0.81 0.81 0.82 0.82 0.81 0.81 0.82 0.82 0.82 0.82 0.82 0.82

CMP 0.71 0.71 0.71 0.72 0.71 0.71 0.71 0.72 0.71 0.71 0.71 0.72

LDB 49.9 54.3 58.3 62.5 51.5 55.5 59.1 63.5 54.3 58.3 60.9 65.4

LWB 44.0 50.3 55.5 61.1 44.8 51.2 56.3 61.9 46.1 52.7 57.7 63.3

TCG 10.79 10.76 11.78 12.63 11.12 10.68 11.96 12.76 11.63 11.29 12.24 12.93

SHG 10.79 9.24 7.98 6.49 11.12 9.50 8.25 6.64 11.63 10.62 8.81 6.89

TC 10.76 10.73 11.76 12.60 11.09 10.65 11.93 12.73 11.60 11.27 12.21 12.91

kW 0.91 0.91 0.92 0.92 0.92 0.91 0.92 0.93 0.92 0.92 0.92 0.93

CMP 0.81 0.81 0.82 0.82 0.81 0.81 0.82 0.82 0.82 0.82 0.82 0.82

LDB 51.2 55.3 58.7 62.8 52.5 56.4 59.6 63.7 55.2 57.3 61.2 65.4

LWB 44.6 51.5 56.0 61.4 45.3 52.0 56.7 62.2 46.5 52.8 58.0 63.5

TCG 10.17 9.76 11.21 12.15 10.55 10.05 11.37 12.27 11.12 11.12 11.66 12.49

SHG 10.17 9.14 7.81 6.32 10.55 9.50 8.08 6.47 11.12 11.12 8.64 6.79

TC 10.14 9.73 11.18 12.12 10.53 10.02 11.34 12.24 11.09 11.09 11.63 12.46

kW 1.02 1.01 1.03 1.04 1.02 1.02 1.03 1.04 1.03 1.03 1.03 1.04

CMP 0.91 0.91 0.92 0.93 0.92 0.91 0.92 0.93 0.92 0.92 0.93 0.93

LDB 52.7 55.4 59.1 63.2 53.8 56.4 60.0 64.1 56.2 56.2 61.5 65.6

LWB 45.4 52.0 56.6 61.8 45.9 52.5 57.3 62.6 47.0 53.0 58.5 63.8

TCG 9.51 8.95 10.54 11.55 9.87 9.86 10.70 11.68 10.54 10.55 10.96 11.88

SHG 9.51 8.73 7.59 6.12 9.87 9.86 7.88 6.28 10.54 10.55 8.44 6.60

TC 9.48 8.92 10.51 11.52 9.84 9.84 10.68 11.65 10.52 10.52 10.93 11.85

kW 1.13 1.12 1.14 1.15 1.13 1.13 1.14 1.15 1.14 1.14 1.15 1.16

CMP 1.02 1.01 1.04 1.05 1.03 1.03 1.04 1.05 1.04 1.04 1.04 1.05

LDB 54.4 56.5 59.7 63.7 55.5 55.5 60.4 64.6 57.4 57.4 61.9 66.0

LWB 46.2 52.9 57.2 62.4 46.7 52.7 57.9 63.1 47.5 53.5 59.0 64.2

TCG 8.82 8.82 9.56 10.82 9.16 9.16 9.82 10.96 9.81 9.81 10.17 11.16

SHG 8.82 8.82 7.29 5.87 9.16 9.16 7.61 6.04 9.81 9.81 8.21 6.37

TC 8.79 8.79 9.53 10.79 9.13 9.13 9.80 10.93 9.78 9.78 10.14 11.13

kW 1.25 1.25 1.26 1.28 1.25 1.25 1.26 1.28 1.26 1.26 1.27 1.28

CMP 1.14 1.14 1.15 1.17 1.14 1.14 1.15 1.17 1.15 1.15 1.16 1.17

LDB 56.2 56.2 60.4 64.4 57.2 57.1 61.0 65.1 58.9 58.9 62.4 66.4

LWB 47.0 53.0 58.2 63.0 47.4 53.4 58.7 63.6 48.2 54.1 59.6 64.7

TCG 8.11 8.14 8.49 9.97 8.42 8.41 8.65 10.10 9.01 9.01 8.81 10.30

SHG 8.11 8.14 6.97 5.59 8.42 8.41 7.18 5.77 9.01 9.01 7.63 6.11

TC 8.08 8.11 8.46 9.94 8.39 8.38 8.63 10.07 8.99 8.98 8.78 10.27

kW 1.37 1.37 1.37 1.40 1.37 1.37 1.38 1.40 1.39 1.39 1.38 1.41

CMP 1.26 1.26 1.26 1.29 1.26 1.26 1.27 1.29 1.27 1.27 1.27 1.29

LDB 58.1 58.0 61.2 65.1 58.9 58.9 62.1 65.7 60.5 60.6 63.5 66.9

LWB 47.9 53.7 59.2 63.8 48.2 54.1 59.7 64.3 49.0 54.8 60.7 65.3

339/0.04 367/0.04 427/0.05

62

(16.67)67(19.44)72(22.22)57(13.89)62(16.67)67(19.44)72(22.22)57(13.89)62(16.67)67(19.44)72(22.22)

COOLING CAPACITIES

A i r E n t e r i n g E v a p o r a t o r --- C f m / B F

Air Entering Evaporator --- Ewb _F(_C)

38/40MVC, MVQ

LEGEND

BF --- Bypass Factor
CMP --- Compressor
Edb --- Entering Dry Bulb
Ewb --- Entering Wet Bulb
k W --- Tota l Po w e r
LDB --- Leaving Dry Bulb
L WB --- L e a v i n g Wet Bu l b
SHG --- Gross Sensible Capacity (1000 Btu/hour)
TC --- Total Net Cooling Capacity (1000 Btu/hour)

---

11

NOTES:

1. Direct interpolation is permissible. Do not extrapolate.

2. The SHG is based on 80_F (26.67_C) edb temperature of air

entering indoor coil.
Below 80_F (26.67_C) edb, subtract (corr factor x cfm) from
SHG.
Above 80_F (26.67_C) edb, add (corr factor x cfm) to SHG.

Correction Factor = 1.10 x (1 --- BF) x (edb --- 80).