Carnes SKTA User Manual
SPECIFICATION SHEET
Model SKTA
Imperial [IP] Dimensions
Metric (SI) in Parentheses
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com
Square Diffuser with Round Neck Option
T-Bar Lay In
Steel Construction
SQUARE
BLOW-10
3-1/2” (89)
BLOW-20
BLOW-25
BLOW-30
BLOW-40
Unit Size 11-3.4x11-3/4 11-3/4x23-3/4 23-3/4x23-3/4 23-3/4x47-3/4 47-3/4x47-3/4
Size A x B (229x229) (229x603) (603x603) (603x1212) (1212x1212)
Notes:
1 Order standard SKEA which has an
outside of 11-13/16” x 11-13/16”
(229x229).
2 Order standard SKEA which has an
outside of 11-13/16” x 23-13/16”
(603x603).
3 Standard finish is Carnes No. 11
White electrocoat.
For other sizes and panel sizes contact
Carnes Company Sales Department.
ADJUSTMENT DETAIL
HORIZONTAL
AIR FLOW
VERTICAL
AIR FLOW
Two spring loaded pins,
four pin suspension to
ceiling plate. Removable
and interchangeable center
core assembly.
4 6x6
(102) (152x152)
5 6x6
(127) (152x152)
6 6x6
(152) (152x152)
6 9x9
(152) (229x229)
8 9x9
(203) (229x229)
9 9x9
(229) (229x229)
10 12x12
(254) (305x305)
12 12x12
(305) (305x305)
12 15x15
(305) (381x381)
14 15x15
(356) (381x381)
15 15x15
(381) (381x318)
16 18x18
(406) (457x457)
18 18x18
(457) (457x457)
18 21x21
(457) (533x533)
20 21x21
(508) (533x533)
21 21x21
(533) (533x533)
22 24x24
(559) (610x610)
24 24x24
(610) (610x610)
1-1/4”
B
Neck O. D.
Size -1/8 (3)
(32)
1-1/2” (13)
1/2”
(13)
D
C
DIMENSIONS LISTED IN INCHES (Millimeters)
PANEL - C x D
NA = Not Available
1
1
1
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
2
2
2
2-1/4”
(57)
A
COPYRIGHT © 2013 CARNES COMPANY
ALL RIGHTS RESERVED
SUPERSEDES 12080-O 12080-P
Loading...