Carnes RAWA User Manual

Imperial [IP] Dimensions

Metric (SIB) in Parentheses

SPECIFICATION SHEET

Aluminum Split Blade Drum Louver Option “S”

RAWA (Grille)

RNWA (Register)

CARNES COMPANY, 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone [phone] Fax: (608 ) 845.6470 [e-mail] www.CARNES.com

CARNIES COMPANY © 2004 COPYRIGHT

ALL RIGHTS RESERVED

14128

Height Blade Core Forward Grille Register

Nominal ODA Centers Height Projection Depth Depth

Size

(A) (B) (C) (D) (E) (F)

9” x 6”
12” x 6”
18” x 6”
24” x 6” 8-5/16” 3” 3-5/16” 1-3/8” 3-7/8” 5-1/8”
30” x 6” (211) (76) (84) (35) (98) (130)

36” x 6”

48” x 6”

60” x 6”

10” x 10”
15” x 10”
30” x 10”
35” x 10” 12-3/8” 3” 5-7/8” 2-11/16” 5-15/16” 7-7/16”
40” x 10” (314) (76) (149) (68) (151) (189)
50” x 10”
60” x 10”
17” x 10”

Height Blade Core Forward Grille Register

Nominal ODA Centers Height Projection Depth Depth

Size

(A) (B) (C) (D) (E) (F)

20” x 12”
30” x 12”
40” x 12” 14-3/8” 3” 7-7/8” 2-11/16” 5-15/16” 7-7/16”
50” x 12” (365) (76) (200) (68) (151) (189)
60” x 12”
70” x 12”
15” x 15”
20” x 15”
25” x 15”
30” x 15” 16-7/8” 3” 9-3/16” 3-3/4” 8-3/8” 9-3/16”
40” x 15” (429) (76) (233) (95) (213) (233)
50” x 15”
60” x 15”
70” x 15”

Notes:

1. Construction is 6063-T5 extruded aluminum.

2. Felt gasket is used to seal the edge of the drum.

3. Recommended duct opening is Nominal Width by Nominal Height +5/16” (16).

4. Standard finish is mill finish. Other finishes are available on request.

5. Use of damper is recommended only when static pressure is .250 w.g. or lower.

6. Drum is adjustable 30° up or down from the centerline.

7. Top and bottom of blade are adjustable individually of each other

Nominal Width
+1-11/16” (430

F

Recommended Duct

Opening is Nominal

Width

B

C

A

E

D

1/4” (6)

0° Deflection

15° Deflection

30° Deflection

Recommended

Duct Opening

Nominal Height

+5/8” (16)

Grille
Model
RAWA

Register
Model
RNWA