Carnes KXKA User Manual
SPECIFICATION SHEET
MODEL KXKA STEEL OPPOSED BLADE DAMPER
for STEEL SQUARE and RECTANGULAR DIFFUSER
and SQUARE NECK STAMPED PERFORATED DIFFUSERS
CARNES COMPANY © 2007 COPYRIGHT
ALL RIGHTS RESERVED
SUPERSEDES 12631-D 12631-E
DIMENSIONS LISTED IN INCHES (Millimeters)
SIZE A x B SIZE A x B SIZE A x B
6 x 6 (152 x 152) 9 x 21 (229 x 533) 15 x 21 (381 x 533)
6 x 9 (152 x 229) 9 x 24 (229 x 610) 15 x 24 (381 x 610)
6 x 12 (152 x 305) 10 x 10 (254 x 254)
•
16 x 16 (406 x 406)
•
6 x 15 (152 x 381) 10 x 22 (254 x 559)
•
18 x 18 (457 x 457)
6 x 18 (152 x 457) 12 x 12 (305 x 305) 18 x 21 (457 x 533)
6 x 21 (152 x 533) 12 x 15 (305 x 381) 18 x 24 (457 x 610)
6 x 24 (152 x 610) 12 x 18 (305 x 457) 21 x 21 (533 x 533)
8 x 8 (203 x 203)
•
12 x 21 (305 x 533) 21 x 24 (533 x 610)
9 x 9 (229 x 229) 12 x 24 (305 x 610) 22 x 22 (559 x 559)*
9 x 12 (229 x 305) 14 x 14 (356 x 356)
•
24 x 24 (610 x 610)
9 x 15 (229 x 381) 15 x 15 (381 x 381)
9 x 18 (229 x 457) 15 x 18 (381 x 457)
•
For use on stamped perforated ONLY.
Notes:
1. Model KXKAS — Blades parallel to short dimension.
2. Model KXKAL — Blades parallel to long distance.
3. For square diffusers with blow patterns 12 and 22 use Model KXKAL with long blades.
4. Standard finish is #04 gray electrocoat enamel.
A
LIST SIZE -3/8” (10)
B
LIST SIZE -1/16” (2)
1-5/8” (41)
2-1/16” (52)
2-3/8” (60)
BLADES PARALLEL TO
SHORT DIMENSION
A
STAMPED DIFFUSER
CEILING PLATE
SQUARE DIFFUSER
CEILING PLATE
OPREATING LEVER STUB
REMOVABLE
OPEATOR
Imperial [IP] Dimensions
Metric (SI) in Parentheses
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6470 www.carnes.com
Loading...