Carnes HXHCG Installation Manual
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com
COPYRIGHT © 2013 CARNES COMPANY
ALL RIGHTS RESERVED
SUPERSEDES 16810 16810-A
SPECIFICATIONS
INSTALLATION
The wall mounted HXHCG Humidistat uses a monolithic sensor and electronic circuitry to provide accurate and reliable humidity
sensing. Set point range is 0 to 100% R. H. to cover most application requirements. The HXHCG has a concealed setpoint
adjustment with a locking cover to prevent tampering. Ambient operating conditions are from 0
O
to 85OC.
All wiring connections must be made in
accordance with the National Electrical
Code and all local regulations.
Make connections using No. 18 AWG
wire.
Avoid running control wiring near high
voltage primary wires.
SPECIFICATIONS AND INSTALLATION
Model HXHCG
Wall Humidistat, Proportional Control
IP [English] Dimensions
Metric (SI) In Parentheses
4-1/2”
(114mm)
2-13/16”
(71mm)
The HXHCG has a locking cover. Unlock and open the cover by inserting an Allen wrench as shown.
1-1/4”
(32mm)
Lift cover up
from base
Allen
Screws
Use Allen
wrench to
unlock cover
J16
Loading...