Specifications are subject to change without notice (20.07.2005) 1
Ultrasonic
Diffuse, Analogue Output
Type UC 80 CND 60 A . M1 TR
Product Description
Ultrasonic sensor
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection
Remote teach
Type Selection
Housing Connection Rated operating Outputs Ordering no.
dimensions dist. (S
n
)
80 x 80 x 50 mm Plug M12, 5 pin 600-6000 mm 0-10 V UC 80 CND 60 AK M1 TR
80 x 80 x 50 mm Plug M12, 5 pin 600-6000 mm 4-20 mA UC 80 CND 60 AG M1 TR
Ordering Key
UC80CND60AKM1TR
A self-contained multi function diffuse ultrasonic sensor
with a sensing range of 600
to 6000 mm. The analog
output is easily set up in 2
setpoints, pos./neg. slope
and adjusted by teach-in makes it ideal for level control tasks in a wide variety of
vessels. A sturdy one-piece
ABS housing provides the
perfect packaging for the
sofisticated microprocessor
controlled and digitally filtered sensor electronics.
Excellent EMC performance
and precision are typical
features of this sensor
based on true distance
measurement.
Technical Data
Rated operational volt. (Ue) 15 to 30 VDC (ripple included)
Ripple ≤ 10%
No-load supply current (Io) ≤ 35 mA
Protection Short-circuit, transients and
reverse polarity
Rated insulation voltage > 1 kV
Power-on delay* 200 ms
Output
UA..CLD..AK.. 0-10 VDC
UA..CLD..AG.. 4-20 mA
Output slope Positive or negative
Setup via teach-in
Linearity error < 0.5%
Repeat accuracy (R) 0.2% ± 2 mm
Rated operating distance/
Resolution
* 1.5 mm
Load
4-20 mA max. 500 Ω
0-10 V min. 1 kΩ
Carrier frequency*
80 KHz
Indication Set points, 2 LEDs yellow
Echo, 1 LED green
Rated operating distance 600 - 6000 mm
Temperature compensation Ye s
Beam angle 8°
Ambient temperature
Operating and Storage -15° to +70°C (5° to +158°F)
Degree of protection IP 65
Housing material Polyester, PTPB
Connection Plug M12, 5-pin
Cables for plug (M1) CONM15 series
Weight 300 g
CE-marking Yes
• Square 80 mm ABS housing
• Sensing distance: 600 - 6000 mm
• Remote Teach by wire
• Outputs: Analog 0-10 V or 4-20 mA
• Setup of positive or negative slope
• Power supply: 15 to 30 VDC
• 8° beam angle
• Protection: Short-circuit, reverse polarity, transients
• Protection degree IP 65
• M12 plug, 5 pin
* Preliminary* Preliminary
2 Specifications are subject to change without notice (20.07.2005)
7
UC 80 CND 60 A. M1 TR
Analogue Output Adjustment
Echo P1 P2
Green Yellow Yellow
Teach in of P1 position
Teach in of P2 position
Teach-In for
8 sec
14 sec
Normal function:
The Echo LED is ON when the echo is received (this is the
alignment LED confirming that the target is properly aligned).
The LED P1 is ON, when the target is between the sensor
face and P1. The LED P2 is ON when Target is farther than
P2.
Teach-In for
14 sec
Detection Range
Guaranteed detection of a target 100 x 100 mm
Possible detection of a large target
Dimensions
Dimensions in mm.
+
-
1 BN
3 BU
4 WH
Teach-in
5 PK
(GY)
5
3
2
1
4
Wiring Diagram
+400
-400
mm
600 6000
mm
Loading...