Carlo Gavazzi UA30EAD......TI Catalog Page
Ultrasonic
Diffuse, Analogue and Digital Output
Types UA30EAD......TI
• Cylindrical M30 Stainless Steel INOX
AISI 316L housing
• Sensing distance: 350-3500 mm
• Power supply: 12 (15) to 30 VDC
• Outputs: 0-10 VDC or 4-20 mA and one switching
output NPN or PNP.
• Linearity error 1%
• Repeatability 1%
• Beam angle. ±7°
• Protection: Short-circuit, reverse polarity and
overvoltage
• Protection degree IP 67
• 2 m cable or M12 plug
Product Description
A family of diffuse ultrasonic sensors in Stainless steel
housing and with sensing
range from 350-3500 mm
with a resolution as low as
2.0 mm.
The sensor contains both an
analogue and a digital output.
The output is either 0-10V or
4-20 mA and the digital output
NPN or PNP, NO or NC which
forms a windows detection.
The sensor is the ideal choice
for distance measurement,
level measurement, diameter
measurement or loop control.
Due to use of microprocessor control the digital filtering
makes the sensor immune to
most electromagnetic interferences.
Ordering Key
Ultrasonic sensor
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection
Teach-in
UA30EAD35NGM1TI
Type Selection
Housing Connec- Rated operating Analog Digital output Ordering no.
diameter tion dist. (Sn) Output NPN/PNP
M30 Plug M12 350-3500 mm 4-20 mA NPN UA 30 EAD 35 NG M1 TI
M30 Cable 350-3500 mm 4-20 mA NPN UA 30 EAD 35 NG TI
M30 Plug M12 350-3500 mm 0-10 V NPN UA 30 EAD 35 NK M1 TI
M30 Cable 350-3500 mm 0-10 V NPN UA 30 EAD 35 NK TI
M30 Plug M12 350-3500 mm 4-20 mA PNP UA 30 EAD 35 PG M1 TI
M30 Cable 350-3500 mm 4-20 mA PNP UA 30 EAD 35 PG TI
M30 Plug M12 350-3500 mm 0-10 V PNP UA 30 EAD 35 PK M1 TI
M30 Cable 350-3500 mm 0-10 V PNP UA 30 EAD 35 PK TI
Specifications
Rated operating distance (Sn) Reference target: 1 mm
metal rolled finish, size
400 x 400 mm.
350 - 3500 mm
Blind zone ≤ 350 mm
Repeatability 1%
Linearity error 1%
Beam angle ±7˚
Sensitivity
Push-button P1 (longest setpoint)
P2 (shortest setpoint)
Resolution 2 mm
Temperature drift 0.1%/˚C @ -20˚ to +70˚ C
Temperature compensation Yes
Hysteresis (H) Min. 1%
Specifications are subject to change without notice (01.04.2014) 1
Rated operational voltage (UB)
NG or PG versions 12 to 30 VDC
NK or PK versions 15 to 30 VDC
(ripple included)
Ripple (U
No-load supply current (Io) 50 mA @ UB max
Output current continuous
digital output (Ie)
Max. load capacity 100 nF 100 mA
Output current short-time
digital output (I)
Max. load capacity 100 nF 100 mA
Minimum operational current
digital output (Im) 0.5 mA
OFF-state current digital
output (Ir) 10 μA
) ≤ 5%
rpp
U
UA30EAD..
Ta
Specifications (cont.)
Voltage drop digital output (Ud) ≤ 2.2 VDC @ 100 mA
Protection
Digital output Short-circuit, overvoltage
pulses and reverse polarity
Supply Overvoltage pulses and
reverse polarity
Analogue output Overvoltage pulses
Analog output
NG.. or PG.. types 4 to 20 mA
NK.. or PK.. types 0 to 10 VDC
Load
4 to 20 mA ≤ 500 Ω
0 to 10 VDC ≥ 3 kΩ
Carrier frequency 112 kHz
Operating frequency digital
output (f) ≤ 2 Hz
Response time OFF-ON
digital output (tON) ≤ 250 mS
Response time ON-OFF
digital output (t
) ≤ 250 mS
OFF
Response time analog output ≤ 500 mS
Power ON delay ≤ 500 mS
Output function, open
collector
By sensor type NPN or PNP
Output switching function One open collector transis-
tor and one analogue
output to be configured as:
- Windows function with
N.O or N.C. output.
- Analogue output with
positive or negative slope.
Indication
Output ON Yellow LED
Echo received Green LED
Environment
Installation category lll (IEC 60664/60664A;
60947-1)
Pollution degree 3 (IEC 60664/60664A;
60947-1)
Degree of protection IP67 (IEC 60529; 60947-1
Ambient temperature
Operating
Storage
Vibration
-20° to +70°C (-4° to +158°F)
-35° to +70°C (-31° to +158°F)
10 to 55 Hz, 1.0 mm/6G.
(IEC/EN 60068-2-6)
Shock
30 g / 11 mS, 3 directions
(IEC/EN 60068-2-27)
Rated insulation voltage < 500 VAC (rms)
Housing
Material body AISI 316L
Material front Epoxy-glass resin
Material back, plug Grilamid
Material back, cable Grilamid
Material push-button TPE
Sealing around push-button TPE
Material sealing front
TPE
Connection
Cable PVC, grey, 2 m,
4 x 0.34 mm2, Ø = 4.7 mm
Plug M12, 4-pin (CON. 14-series)
Tightening torque ≤ 100 Nm
Weight
Cable version 220 g
Plug version 150 g
CE-marking Yes
Approvals cULus (UL508)
Wiring Diagram
BN1
WH2
PNP:
NPN:
BK4
U
BU3
Voltage Current
BN1
BK4
U
WH2
BU3
BN1
WH2
BK4
I
BU3
BN1
I
BK4
WH2
BU3
Detection Range
X
rget
Y
Sensor
1.6 3.3 4.9 9.8 11.50 6.6 8.2
0 0
0.5 1.0 1.5 3.0 3.50 2.0 2.5
-100
-200
Parallel displacement (mm)
-300
-400
400
300
200
100
Distance (feet)
Distance (m)
15.7
11.8
7.9
3.9
-3.9
-7.9
-11.8
-15.7
Parallel displacement (inch)
2 Specifications are subject to change without notice (01.04.2014)
Loading...