Carlo Gavazzi UA18EAD.. Specifications

UA18EAD..

Specifications

Rated operating distance (Sn) Reference target: 1 mm
metal rolled finish.
EAD04: 100 x 100 mm
EAD09 and EAD15:
200 x 200 mm
UA18EAD04 50 - 400 mm
UA18EAD09 100 - 900 mm
UA18EAD15 200 - 1500 mm

Blind zone
UA18EAD04... ≤ 50 mm
UA18EAD09... ≤ 100 mm
UA18EAD15... ≤ 200 mm

Repeatability 0.5%
Linear Accuracy 1%
Beam angle

UA18EAD04... ±10˚
UA18EAD09... ±7˚
UA18EAD15... ±7˚

Sensitivity
Push-button P1 (farthest setpoint)

P2 (nearest setpoint)
Resolution 1 mm

Temperature drift 0.1%/˚C @ -20˚ to +60˚ C
Temperature compensation Yes
Hysteresis (H) Min. 1%
Rated operational voltage (UB) 15 to 30 VDC

(ripple included)
Ripple (U

) ≤ 5%

rpp

No-load supply current (Io)
UA18EAD04... 50 mA @ UB max
UA18EAD09... 50 mA @ UB max
UA18EAD15... 50 mA @ UB max

Output current continuous
digital output (Ie)
Max. load capacity 100 nF 100 mA
UL508 specification 100 mA

Output current short-time
digital output (I)
Max. load capacity 100 nF 100 mA
UL508 specification 100 mA

Minimum operational current
digital output (Im) 0.5 mA

OFF-state current digital
output (Ir) 10 μA

Voltage drop digital output (Ud) ≤ 2.2 VDC @ Ie max.
Protection digital output Short-circuit, overvoltage

and reverse polarity

Output analog output
NG.. or PG.. types 4 to 20 mA
NK.. or PK.. types 0 to 10 VDC

Load
4 to 20 mA max. 500 Ω
0 to 10 VDC min. 3 kΩ

Carrier frequency
UA18EAD04... 300 kHz
UA18EAD09... 300 kHz
UA18EAD15... 200 kHz

Operating frequency digital
output (f)
UA18EAD04... ≤ 10 Hz
UA18EAD09... ≤ 4 Hz
UA18EAD15... ≤ 1 Hz

Response time OFF-ON
digital output (tON)
UA18EAD04... ≤ 50 mS
UA18EAD09... ≤ 125 mS
UA18EAD15... ≤ 500 mS

Response time ON-OFF
digital output (t
UA18EAD04... ≤ 50 mS

OFF

)

UA18EAD09... ≤ 125 mS
UA18EAD15... ≤ 500 mS

Response time analog output ≤ 500 mS
Power ON delay ≤ 500 mS
Output function, open

collector
By sensor type NPN or PNP

Output switching function One open collector transis-

tor and one analogue
output to be configured as:
Window function with N.O
or N.C. output.
Analogue output with posi­ tive or negative slope.

Indication Output ON Yellow LED
Environment

Installation category lll (IEC 60664/60664A;

60947-1)
Pollution degree 3 (IEC 60664/60664A;
60947-1)

Degree of protection IP67 (IEC 60529; 60947-1)
Ambient temperature

Operating

Storage

Vibration

-20° to +60°C (-4° to +140°F)

-35° to +70°C (-31° to +158°F)
10 to 55 Hz, 1.0 mm/6g

(IEC/EN 60068-2-6)
Shock

30 g / 11 mS, 3 directions

(IEC/EN 60068-2-27)

Rated insulation voltage < 500 VAC (rms)
Housing

Material body AISI 316L
Material front Epoxy-glass resin
Material back, plug Grilamid
Material back, cable Grilamid
Material trimmer POM
Sealing around trimmer TPE
Material sealing front

UA18EAD04... TPE
UA18EAD09... TPE
UA18EAD15... TPE

Connection

Cable PVC, grey, 2 m,
4 x 0.32 mm2, Ø = 4.7 mm
Plug M12, 4-pin (CON. 14-series)

Tightening torque ≤ 50 Nm

2 Specifications are subject to change without notice (01.04.2014)