CARLO GAVAZZI UA18CLD05AGM1TR, UA18CLD05AKTR, UA18CLD08AKM1TR, UA18CLD05AGTR, UA18CLD08AGM1TR Product Description
...
Ultrasonic
Diffuse, Analogue Output
Type M18 and M30
• M18 and M30 PBT housing
• Sensing distance: 60 - 3500 mm
• Remote Teach by wire
• Outputs: Analog 0-10 V or 4-20 mA
• Setup of positive or negative slope
• Power supply: 15 to 30 VDC
• 8° beam angle
• Protection: Short-circuit, reverse polarity, transients
• Protection degree IP 67
• M12 plug, 5 pin
Product Description
A family of multi function diffuse ultrasonic sensors with
a sensing range of 60 to
3500 mm. The analog output
is easily set up in 2 setpoints
(pos./neg. slope) and adjusted by teach-in - makes it
ideal for level control tasks in
a wide variety of vessels. A
sturdy one-piece PBT
housing provides the perfect
packaging for the sofisticated microprocessor controlled and digitally filtered
sensor electronics. Excellent
EMC performance and precision are typical features of
this sensor based on true
distance measurement.
Ordering Key
Ultrasonic sensor
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection
Remote teach
UA18CLD20AKM1TR
Type Selection
Housing Connection Rated operating Outputs Ordering no.
dimensions dist. (S
M18 x 93 mm Plug M12, 5 pin 60-500 mm 0-10 V UA18CLD05AKM1TR
M18 x 93 mm Cable 60-500 mm 0-10 V UA18CLD05AKTR
M18 x 93 mm Plug M12, 5 pin 60-500 mm 4-20 mA UA18CLD05AGM1TR
M18 x 93 mm Cable 60-500 mm 4-20 mA UA18CLD05AGTR
M18 x 93 mm Plug M12, 5 pin 100-800 mm 0-10 V UA18CLD08AKM1TR
M18 x 93 mm Cable 100-800 mm 0-10 V UA18CLD08AKTR
M18 x 93 mm Plug M12, 5 pin 100-800 mm 4-20 mA UA18CLD08AGM1TR
M18 x 93 mm Cable 100-800 mm 4-20 mA UA18CLD08AGTR
M18 x 93 mm Plug M12, 5 pin 200-2000 mm 0-10 V UA18CLD20AKM1TR
M18 x 93 mm Cable 200-2000 mm 0-10 V UA18CLD20AKTR
M18 x 93 mm Plug M12, 5 pin 200-2000 mm 4-20 mA UA18CLD20AGM1TR
M18 x 93 mm Cable 200-2000 mm 4-20 mA UA18CLD20AGTR
M30 x 125 mm Plug M12, 5 pin 300-3500 mm 0-10 V UA30CLD35AKM1TR
M30 x 123.5 mm Cable 300-3500 mm 0-10 V UA30CLD35AKTR
M30 x 125 mm Plug M12, 5 pin 300-3500 mm 4-20 mA UA30CLD35AGM1TR
M30 x 123.5 mm Cable 300-3500 mm 4-20 mA UA30CLD35AGTR
)
n
Technical Data
Rated operational volt. (Ue) 15 to 30 VDC (ripple included)
Ripple ≤ 10%
No-load supply current (Io) ≤ 40 mA
Protection Short-circuit, transients and
reverse polarity
Rated insulation voltage > 1 kV
Power-on delay
UA18..D05/D08 60 ms
UA18..D20 90 ms
UA18..D35 220 ms
Specifications are subject to change without notice (06.08.2008) 1
Output
UA..CLD..AK.. 0-10 VDC
UA..CLD..AG.. 4-20 mA
Output slope Positive or negative
Setup via teach-in
+
-
1 BN
3 BU
4 BK
Teach-in
5 PK
(GY)
5
3
2
1
4
M18 and M30
1
2
3
4
5
Echo P1 P2
Green Yellow Yellow
Technical Data (cont.)
Linearity error < 0.5%
Repeat accuracy (R)
UA....D05/08 0.2%; 1 mm
UA....D20/35 0.2%: 2 mm
Rated operating distance/
Resolution
UA18CLD05 60-500 mm: 0.25 mm
UA18CLD08 100-800 mm: 0.25 mm
UA18CLD20 200-2000 mm: 1.0 mm
UA30CLD35 300-3500 mm: 1.0 mm
Load
4-20 mA max. 500 Ω
0-10 V min. 1 kΩ
Carrier frequency
UA....D05 330 KHz
UA....D08 300 KHz
UA....D20 180 KHz
UA....D35 130 KHz
Response time
UA18CLD05/08 100 ms
UA18CLD20 200 ms
UA30CLD35 400 ms
*
Analogue Output Adjustment
Teach-In for
8 sec
Teach-In for
14 sec
Teach in of P1 position
14 sec
Indication Set points, 2 LEDs yellow
Echo, 1 LED green
Rated operating distance 60 - 3500 mm
Temperature compensation Yes
Beam angle 8°
Ambient temperature
Operating and Storage -15° to +70°C (5° to +158°F)
Degree of protection IP 67 (Nema 1, 3, 4, 6, 13)
Housing material Polyester, PBTP
Connection
Cable 2 m, 5 x 0.25 mm
Plug
Cables for plug (M1) CONM15 series
WeightWeight UA 18 ...A. 96 g
UA 18 ...A.M1 57 g
UA 30 ...A. 199 g
UA 30 ...A.M1 140 g
Tightening torque M18 2.6 Nm
M30 7.5 Nm
CE-marking Yes
M12, 5-pin
2
Teach in of P2 position
Normal function:
The Echo LED is ON when the echo is received (this is the
alignment LED confirming that the target is properly aligned).
The LED P1 is ON, when the target is between the sensor
face and P1. The LED P2 is ON when Target is farther than
P2.
Wiring Di a gram
2 Specifications are subject to change without notice (06.08.2008)
Loading...