Axial Direct Drive Fans are the perfect low cost exhaust choice in the areas that have little or no ductwork, and thus,
relatively low to moderate resistance.
DDAR-FA
AXIAL DOWNBLAST DIRECT DRIVE FANS
Air Volume: 2 - 2400 cfm
Maximum SP: 1.5" wg. @ standard air density
Spun aluminum housing for rust-free weather resistant durability
Propellers constructed with die formed blades riveted to a steel hub
Can be roof or wall mounted
Standard bird screen
Wire conduit to provide a clear channel for electrical connections
Emergency Disconnect Switch
OPTIONS
Gravity Damper.
Motorized Damper.
Wall Mount Sleave.
Roof Curb.
CERTIFICATIONS
CaptiveAire certifies that Model DDAR10FA thru DDAR18FA shown
herein are licensed to bear the AMCA seal. The ratings shown are
based on tests and procedures performed in accordance with AMCA
Publication 211 and comply with the requirements of the AMCA
Certified Rating Program.
Models DDAR10FA thru DDAR18FA are ETL Listed under file number
3049729-002 and comply with UL705 (electrical) Standards and CSA
Std C22.2, No 113.
Catalog #109C
March 2009