Canon WFT-E7 B User Manual [ru]

Wireless File Transmitter

COPY

WFT-E7

To comply with local radio wave regulations, Canon offers five region-specific versions of the transmitter (WFT-E7A, E7B, E7C, E7D, and E7E) in various areas around the world. (See Areas of Use and Restrictions.) For convenience, we refer to the product in this manual simply as “the transmitter,” without reference to versions A, B, C, D, or E.

INSTRUCTION MANUAL

Thank you for purchasing a Canon product.

COPY

The Wireless File Transmitter WFT-E7 is an accessory for EOS cameras. In addition to time synchronization with other cameras (over a wireless or wired LAN connection) and Bluetooth connectivity with GPS devices, the transmitter enables the following operations.

Wireless and Wired LAN Functions

FTP TransferFTP Transfer

Transfer images to an FTP server

EOS Utility

Use EOS Utility to capture, view, and download images remotely

WFT Server

Use a web browser to capture, view, and download images remotely

Media Server

View images on a DLNA-compatible TV or other devices

Linked Shooting

Wirelessly trigger shooting by slave cameras linked to a master camera

Sync the Camera Time over a Wireless or Wired Connection

COPY

Slave camera

Master camera

Connect to GPS Devices (commercially available) via Bluetooth

Slave camera

LAN cable

Slave camera

Hub

Master camera

Connected via Bluetooth

Add the latitude, longitude, altitude, date and time, and other shooting information to images

Conventions Used in this Manual

COPY

These instructions assume that your wireless or wired LAN and FTP server settings are

complete. For details on configuring these settings, refer to the documentation provided with the respective equipment.

Terms in brackets [ ] indicate button or icon names or other software elements. Brackets

also denote camera menu items.

The EOS 5D Mark III is used as an example for illustrations and screens in this manual.

Note that the screens displayed on your camera may differ, depending on the camera model used.

Page numbers in parentheses indicate where you can find additional information. These instructions assume that you have read the Camera Instruction Manual and are

familiar with operating the camera.

Sections of this manual labeled with the following symbols contain information of the

corresponding nature.

: Warnings to avoid potential problems are labeled with a caution symbol.

: Supplemental information is labeled with a note symbol.

Windows is a trademark or registered trademark of Microsoft Corporation in the United

States and other countries.

Macintosh is a registered trademark of Apple Corporation in the United States and other

countries.

Wi-Fi is a registered trademark of the Wi-Fi Alliance. Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi

Alliance.

WPS as used on camera settings screens and in this manual signifies Wi-Fi Protected

Setup.

UPnP is a trademark of the UPnP Implementers Corporation. Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc. All other corporate and brand names in this manual are trademarks or registered

trademarks of their respective owners.

Using the transmitter for remote image transfer, capture, or viewing requires adequate knowledge of configuring your wireless or wired LAN and FTP server. Canon cannot provide support for configuring wireless or wired LANs or FTP servers. Note that Canon cannot be held liable for any loss or damage to the transmitter from erroneous network or FTP server settings. In addition, Canon cannot be held liable for any other loss or damage caused by use of the transmitter.

Chapter List

COPY

Introduction

Basic Network Settings

Transferring Images to an FTP Server

Remote Capture Using EOS Utility

Remote Capture Using WFT Server

Using the Transmitter as a Media Server

Linked Shooting

Managing Settings Information

Synchronizing the Camera Time

Using Bluetooth GPS Devices

Troubleshooting

Reference

113

COPY

Introduction

Conventions Used in this Manual ...................................................................................................... 4

Chapter List........................................................................................................................................ 5

Contents............................................................................................................................................. 6

Safety Warnings................................................................................................................................. 8

Nomenclature..................................................................................................................................... 9

Installing and Removing the Battery ................................................................................................ 11

Using a Household Power Outlet ..................................................................................................... 13

Attaching to the Camera .................................................................................................................. 14

Subsequent Organization of This Manual........................................................................................ 16

1 Basic Network Settings 17

Getting Ready.................................................................................................................................. 18

Displaying the Connection Wizard................................................................................................... 19

Selecting the Communication Method and LAN Type ..................................................................... 20

Using the Wizard to Establish a Connection.................................................................................... 23

WPS Connections (PBC Mode)....................................................................................................... 25

WPS Connections (PIN Mode) ........................................................................................................ 26

Configuring Network Settings .......................................................................................................... 27

2 Transferring Images to an FTP Server 31

Configuring FTP Communication Settings....................................................................................... 32

Automatic Image Transfer After Each Shot ..................................................................................... 34

Transferring Images Individually ...................................................................................................... 37

Batch Transfer ................................................................................................................................. 40

Checking Image Transfer History .................................................................................................... 45

3 Remote Capture Using EOS Utility 47

Configuring EOS Utility Communication Settings ............................................................................ 48

Using EOS Utility ............................................................................................................................. 51

4 Remote Capture Using WFT Server 53

Configuring WFT Server Communication Settings .......................................................................... 54

Displaying WFT Server .................................................................................................................... 56

Viewing Images................................................................................................................................ 57

Remote Capture [Camera control]................................................................................................... 59

Remote Capture [Simple control]..................................................................................................... 62

Remote Capture............................................................................................................................... 63

Using WFT Server in Linked Shooting............................................................................................. 64

5 Using the Transmitter as a Media Server 65

Configuring Media Server Communication Settings ........................................................................ 66

Displaying Captured Images on a Television ................................................................................... 67

Contents

COPY

6 Linked Shooting 69

Preparing Slave Cameras ................................................................................................................ 70

Basic Linked Shooting ..................................................................................................................... 71

Positioning the Slave Cameras........................................................................................................ 72

Using the Transmitter with WFT Server ........................................................................................... 74

7 Managing Settings Information 83

Checking Settings ............................................................................................................................ 84

Changing Settings............................................................................................................................ 85

Saving and Loading Settings........................................................................................................... 87

8 Synchronizing the Camera Time 89

Preparing for Time Synchronization................................................................................................. 90

Synchronizing the Time ................................................................................................................... 91

9 Using Bluetooth GPS Devices 93

Connecting GPS Devices via Bluetooth........................................................................................... 94

10 Troubleshooting 97

Handling Error Messages ................................................................................................................ 98

Wireless LAN Notes ....................................................................................................................... 111

Checking Network Settings ............................................................................................................ 112

11 Reference 113

Creating and Registering Captions................................................................................................ 114

Using a Bracket (Sold Separately) ................................................................................................. 115

Specifications................................................................................................................................. 116

Index .............................................................................................................................................. 124

Safety Warnings

COPY

The following precautions are intended to prevent harm to you and others as well as damage to equipment. Become familiar with the precautions before using the transmitter to ensure correct and safe operation. Be sure that you fully understand the safety precautions contained in the instruction manuals for the battery, charger, and AC Adapter Kit before using them.

Warning Preventing Serious Injury or Death

To prevent fire, excessive heat, chemical leakage, or explosion, follow these safety guidelines.

• Do not insert metallic objects between electrical contacts of the transmitter, accessories, or connecting cables.

Do not use the transmitter where there is flammable gas. There is a risk of explosion or fire. If the transmitter is dropped and internal parts are exposed, do not touch the exposed parts. There is a risk of

electrical shock.

Do not disassemble or modify the transmitter. High-voltage internal parts may cause electrical shock. Do not store the transmitter in dusty or humid places. There is a risk of fire or electrical shock. Before using the transmitter on board airplanes or in hospitals, make sure use is permitted. Electromagnetic

waves emitted by the transmitter may interfere with instrumentation or medical equipment.

Caution Preventing Injury or Equipment Damage

Do not leave the transmitter inside a vehicle in hot weather or near a heat source. The transmitter may become

hot and cause burns if touched.

Do not cover or wrap the transmitter with a cloth. This may trap heat inside, posing a risk of case deformation or

fire.

Do not use paint thinner, benzene, or other organic solvents to clean the transmitter. This poses a risk of fire and

may be hazardous to your health.

If the product malfunctions, becomes damaged, or requires repair, contact your dealer or the nearest Canon Service Center.

Handling Precautions

The transmitter is a precision instrument. Do not drop it or subject it to shock. The transmitter is not waterproof. Do not use it underwater. Wipe off any moisture with a clean, dry cloth. If the transmitter has been exposed to salty air,

wipe it with a clean damp cloth after wringing it out to remove excess water.

Never leave the transmitter near any equipment that generates a strong magnetic field,

such as magnets or electric motors.

Do not leave the transmitter in excessive heat, such as in a vehicle in direct sunlight. High

temperature may damage the transmitter.

Do not wipe the transmitter using cleaners containing organic solvents. If the transmitter

becomes difficult to clean, take it to the nearest Canon Service Center.

To avoid corrosion, do not store the transmitter where there are strong chemicals, such as in

darkrooms or chemical labs.

Nomenclature

COPY

For detailed information, reference page numbers are provided in parentheses (p.**).

Powe r lamp

(p.14)

LAN

> lamp

LCD panel (p.10)

Tripod screw

Battery compartment cover release lever (p.11)

Battery compartment cover (p.11)

Power switch (p.14)

<a> port (p.14)

Ethernet RJ-45 port

Nomenclature

COPY

LCD panel

onnection icon

Error number

Wireless signal strength

Bluetooth connection

Case

Strap mounts

Wired LAN connection

Battery check

Belt holder

Case strap Case for tripod screw

Interface cables

Approx. 1.5 m / 4.9 ft.Approx. 25 cm / 9.8 in.

Installing and Removing the Battery

COPY

Use one Battery Pack LP-E6 to power the transmitter. When replacing the transmitter’s battery, be sure to turn the transmitter off before opening the battery compartment cover. Also note that the transmitter is not sold with a battery or charger. If you do not own these accessories, they are available for purchase separately.

Installing the battery

Open the cover.

Push the lever down and open the cover.

Insert the battery.

Insert the end with the battery contacts. Insert the battery all the way until it locks into

place.

Close the cover.

Press the cover up until it clicks into place.

Installing and Removing the Battery

COPY

Battery check

The remaining battery power is displayed when you turn the transmitter on. A blinking battery icon ( ) indicates that the battery will be depleted soon.

Icon

Level (%) 100 – 70 69 – 50 49 – 20 19 – 10 9 – 1 0

Number of images that can be transferred Approx. number of images

LAN At Normal Temperature (23°C / 73°F) At Low Temperature (0°C / 32°F)

Wireless LAN 2400 2300

Wired LAN 2200 2200

When using a fully charged LP-E6. The number of images that can be transferred is nearly

the same at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).

When automatic transfer is performed during shooting of an image of approx. 5 MB under

conditions based on the CIPA (Camera & Imaging Products Association) test standards.

Fewer images can be transferred when transferring images continuously over a wireless

LAN.

Removing the battery

Open the cover.

Push the lever down and open the cover.

Remove the battery.

Press the battery lock lever in the direction of the

arrow to unlock, and then remove the battery.

To prevent a short-circuit, be sure to always attach

the protective cover to the battery.

Using a Household Power Outlet

COPY

When the AC Adapter Kit ACK-E6 (sold separately) is used, a household power outlet can be used to power the transmitter without worrying about the battery level.

Connect the DC coupler plug.

Connect the DC coupler plug to the socket of the

AC adapter.

Connect the power cord.

Connect the power cord as shown. Insert the plug into the outlet. After usage, unplug from the outlet.

Insert the DC coupler.

Open the cover, and insert the DC coupler firmly

until the lock position.

Close the cover.

Pass the cord through the groove while opening

the cap of the DC coupler cord notch, and then close the cover.

Do not connect or disconnect the power cord while the transmitter’s power switch is set to <ON>. Do not connect and use AC Adapter Kits ACK-E6 with both the camera and transmitter WFT-E7

simultaneously. It may cause malfunction to the nearby electronic devices. For more information, contact a Canon Service Center.

Attaching to the Camera

COPY

When connecting the transmitter to the camera, always use one of the interface cables included with the transmitter.

Turn off both the camera and transmitter.

Attach the transmitter’s <a> port cap.

To keep the cable securely connected, attach the

cap to the transmitter.

Connect the transmitter and camera.

Connect the end of the cable with the <

logo to the transmitter’s <a> terminal.

Connect the end of the cable with the <

logo to the camera’s <a> terminal.

WFT GPS

CAMERA

Turn on both the camera and transmitter.

X The transmitter’s <3> lamp will light and

<D> will be displayed on the transmitter’s LCD

panel.

Using the Interface Cables

Use the 25 cm / 9.8 in. cable when the transmitter is attached to the camera tripod socket or

Accessory Bracket AB-E1 (sold separately, p.115).

Use the 1.5 m / 4.9 ft. cable when the transmitter is stored in the included case and either

worn over your shoulder or attached to a belt.

Before disconnecting the cable, turn off both the transmitter and camera.

If the transmitter’s <3> lamp blinks, it means that the transmitter and camera are not properly connected. Check the connection.

Example of Attachment

COPY

Example of Using the Case and Strap

Attaching to the Camera

If you turn on/off the transmitter or connect/disconnect the interface cable during Live View shooting or movie shooting, Live View shooting or movie shooting will stop.

Subsequent Organization of This Manual

COPY

Click one of the following chapter titles to view the corresponding page.

1 Basic Network Settings (p.17)

2 Transferring Images to an FTP Server (p.31)

3 Remote Capture Using EOS Utility (p.47)

4 Remote Capture Using WFT Server (p.53)

5 Using the Transmitter as a Media Server (p.65)

6 Linked Shooting (p.69)

7 Managing Settings Information (p.83)

8 Synchronizing the Camera Time (p.89)

9 Using Bluetooth GPS Devices (p.93)

Basic Network Settings

COPY

Complete the basic network settings by following the transmitter’s

connection instructions on the camera menu screen.

Getting Ready

COPY

[FTP trans.], [EOSUtility], [WFTserver]

The connection instructions help you follow the steps to connect the transmitter to an existing wireless or wired LAN. To connect to a wireless LAN, prepare the wireless LAN terminal (wireless LAN access point or wireless LAN adapter) and computer in advance so that they are ready for you to connect the transmitter to the wireless network. When configuring the basic network settings, bring the transmitter within 3 m / 9.8 ft. of the wireless LAN terminal. To connect to a wired LAN, use a LAN cable to connect the transmitter and computer. Set the transmitter for connection to the wired network.

Wireless transfer of movies

Individual movie files are large, and wireless file transfer takes some time. When setting up an environment for stable transmission to the wireless LAN terminal, see the information on page

111.

[MediaServ.]

Set up a DLNA*-compatible television, digital photo frame, or similar media player so that it is ready for use after the transmitter is connected to its network. * DLNA: Digital Living Network Alliance

[LinkedShot]

Set up multiple cameras, including cameras with this transmitter attached and other cameras compatible with linked shooting that have WFT units attached.

Displaying the Connection Wizard

COPY

This section’s explanation follows the flow of the connection instructions. If an error is displayed, see “Troubleshooting” in Chapter 10 (p.97) and check the settings.

Pressing the shutter button or other camera controls during configuration will cause the

connection instructions to close. Do not press the shutter button or other controls until configuration is finished.

In the menu, set [Auto power off] to [Disable]. If auto power off is activated, the connection

instructions close during the configuration process.

Turn on both the camera and transmitter.

Display the transmitter menu.

On the camera, press the <7> button. In the menu, select [Communication settings]

and press <0>.

Select [Network settings].

Select [Connection wizard].

X The [Select communication method] screen is

displayed.

X The <

LAN

> lamp on the transmitter starts blinking.

Selecting the Communication Method and LAN Type

COPY

Selecting the Communication Method

Turn the <5> dial to select the communication

method, and then press <0>.

Select [OK] and press <0> to go to the next

screen.

• FTP trans.

Select this option to transfer captured images to an FTP server. Images can be automatically transferred as you shoot them, or you can select images to be transferred later.

Computer Operating Systems

Use of [FTP trans.] requires that one of the following operating systems be installed on your computer. In addition, the computer must be set up as an FTP server in advance.

• Windows 7 (Professional, Enterprise, or Ultimate Edition for 32- or 64-bit systems)

• Windows Vista (Business, Enterprise, or Ultimate Edition for 32- or 64-bit systems)

• Windows XP Professional

• Mac OS X 10.6 or 10.7

For instructions on setting up your computer as an FTP server, refer to the computer documentation.

The following operating systems cannot be used because FTP server functionality is not provided.

• Windows 7 Home Premium

• Windows Vista Home Premium/Home Basic Edition

• Windows XP Home Edition

• EOSUtility

Select this option for remote capture over a wireless or wired LAN using the EOS Utility software included with your camera. In addition to remote capture, all camera operations in EOS Utility are supported. With this option, a wireless or wired network is used instead of the USB cable.

Requires a computer with EOS Utility (software included with EOS digital cameras) installed.

Selecting the Communication Method and LAN Type

COPY

• WFTserver

Select this option for remote capture over a wireless or wired LAN with the transmitter acting as a server. Additionally, images on a memory card in the camera can be viewed and downloaded to a computer. The camera can be accessed in the same way as browsing a web page, by users at up to three computers.

Computer Operating Systems

Any computer with a web browser can be used, regardless of the operating system. Devices other than computers that feature a web browser can also be used. However, if the web browser does not support JavaScript, WFT Server functions will be limited. Also note that devices with limited performance may display images more slowly, and downloading images to these devices may not be possible.

• MediaServ.

Select this option to view images on a memory card in the camera over a wireless or wired LAN on a television. This function requires a DLNA-compatible television, digital photo frame, or similar media player.

• LinkedShot

Select this option for linked shooting, using multiple cameras compatible with linked shooting that have WFT units attached. Up to 10 slave cameras can be linked to the master camera on which you will release the shutter. Note that there will be a slight delay after you release the master camera shutter before the slave cameras shoot. Movie shooting is not supported.

For further instructions on [LinkedShot], see page 69 of this manual.

Selecting the Communication Method and LAN Type

COPY

Selecting the LAN Type

For [LinkedShot] instructions, see page 69. Note that no information about [LinkedShot] is given in this chapter.

Turn the <5> dial to select the type of LAN, and

then press <0>.

Select [OK] and press <0> to go to the next

screen.

Wireless LAN

The [Wireless LAN setup method] screen is displayed.

[Connect with wizard]: See p.23 [WPS (PBC mode)]: See p.25 [WPS (PIN mode)]: See p.26

Select [WPS (PBC mode)] or [WPS (PIN mode)] when using a wireless LAN terminal compatible with Wi-Fi Protected Setup (WPS).

Wired LAN

The [Network] settings screen is displayed. If you have selected a wired network, see page 27, “Configuring Network Settings.” Use a Category 5e or higher STP LAN cable. (STP: Shielded Twisted Pair)

Using the Wizard to Establish a Connection

123 4

COPY

Selecting the Wireless Network

When you select [Connect with wizard], active wireless LAN terminals in your area are listed, accompanied by their respective information. Select the SSID (or ESS-ID) of your desired wireless LAN terminal.

Select [Connect with wizard].

Turn the <5> dial to select [Connect with

wizard], and then press <0>.

Select the wireless LAN terminal.

To select the wireless LAN terminal, press <0>. Turn the <5> dial to select the wireless LAN

terminal, and then press <0>.

Select [OK] and press <0> to go to the next

screen.

1 Indicates whether the device is in infrastructure or ad hoc mode 2 An icon is displayed if the wireless LAN terminal uses encrypted communication 3 Indicates the first 9 characters of the SSID 4 Indicates the channel used

Encryption by Wireless LAN Terminals

If the wireless LAN terminal uses encrypted communication, select the corresponding method in [Authentication] and [Encryption].

[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK [Encryption]: WEP, TKIP, or AES

[Enter connection] and [Search again]

To configure settings for the wireless LAN terminal manually, select [Enter connection] and

press <0>. Complete the settings following the procedure displayed.

To search for wireless LAN terminals again, select [Search again] and press <0>.

Using the Wizard to Establish a Connection

COPY

Entering the Wireless LAN Encryption Key

Enter the encryption key set for the wireless LAN terminal. For details on the encryption key, refer to the device’s instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and encryption of the wireless LAN terminal.

The [Key index] screen is displayed only if WEP

encryption is used by the wireless LAN terminal.

Turn the <5> dial to select the key index number

specified as the access point, and then press <0>.

Select [OK] and press <0> to go to the next

screen.

Turn the <5> dial to select the key format, and

then press <0>.

Select [OK] and press <0> to go to the next

screen.

Enter the encryption key. To switch between input areas, press the <Q>

button.

To move the cursor, turn the <5> dial. In the bottom input area, turn the <5> dial and

press <0> to enter the encryption key.

If you make a mistake, press the <L> button to

erase it.

When you press the <7> button to complete

the connection with the wireless LAN terminal, the [Network] screen (p.27) is displayed.

To return to the screen in step 2, press the

<6> button. The entry is canceled.

WPS Connections (PBC Mode)

COPY

This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi Protected Setup (WPS). Pushbutton Connection mode (PBC mode) makes it easy to establish a connection between the camera and the wireless LAN terminal by pressing the WPS button on the wireless LAN terminal. Note that if multiple wireless LAN terminals are active in your area, it may be harder to establish a connection. In this case, try using [WPS (PIN mode)] to establish a connection. Confirm the position of the WPS button on the wireless LAN terminal in advance. It may take about one minute to establish connection.

Connection may not be possible if stealth functions are enabled on the wireless LAN terminal. Deactivate stealth functions.

Select [WPS (PBC mode)].

Turn the <5> dial to select [WPS (PBC mode)],

and then press <0>.

Select [OK] and press <0> to go to the next

screen.

Establish a connection with the wireless LAN terminal.

Press the WPS button on the wireless LAN

terminal. For details about where the button is located and how long to press it, refer to the instruction manual of the wireless LAN terminal.

Select [OK] and press <0> to establish a

connection with the wireless LAN terminal.

When the connection with the wireless LAN

terminal is established, the [Network] screen (p.27) is displayed.

WPS Connections (PIN Mode)

COPY

This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set on the wireless LAN terminal to establish a connection. Even if there are multiple wireless LAN terminals active in your area, this is a relatively reliable method of establishing a connection using a shared identification number. It may take about one minute to establish connection.

Connection may not be possible if stealth functions are enabled on the wireless LAN terminal. Deactivate stealth functions.

Select [WPS (PIN mode)].

Turn the <5> dial to select [WPS (PIN mode)],

and then press <0>.

Select [OK] and press <0> to go to the next

screen.

Specify the PIN code on the wireless LAN terminal.

On the wireless LAN terminal, specify the 8-digit

PIN code shown on camera LCD monitor.

For instructions on setting PIN codes on the

wireless LAN terminal, refer to the instruction manual of the wireless LAN terminal.

Select [OK] and press <0> to display the

confirmation screen.

Establish a connection with the wireless LAN terminal.

Select [OK] and press <0> to establish a

connection with the wireless LAN terminal.

When the connection with the wireless LAN

terminal is established, the [Network] screen (p.27) is displayed.

Configuring Network Settings

COPY

Turn the <5> dial to select a configuration

method for the network settings, and then press <0>.

Select [OK] and press <0> to go to the next

screen.

[Auto setting]

Settings otherwise configured with [Manual setting] can be configured automatically.

However, the IP address and similar settings must be automatically assigned and configured in environments using DHCP servers or wireless LAN terminals or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned and configured.

[Manual setting]

The [IP address set.] screen is displayed after you select [Manual setting]. If [Auto setting] results in an error, select [Manual setting]. The IP address you enter must be the IP address assigned to the camera. Enter the [IP address], [Subnet mask], [Gateway], and [DNS address] on each screen as they are displayed. If you are not sure what to enter, see page 112, “Checking Network Settings,” or ask the network administrator or another person knowledgeable about the network.

When entering numbers for the IP address, subnet mask,

and so on, press <0> to move the input position and turn the <5> dial to enter the number.

Configuring Network Settings

COPY

Completing Settings for the Communication Method

The following instructions are for setting screens that vary depending on the communication method (FTP Transfer, EOS Utility, WFT Server, or Media Server), as shown below. Read the page that describes the selected communication method.

FTP trans.

Chapter 2 (p.31)

EOSUtility

Chapter 3 (p.47)

Windows 7 and Windows Vista Users

Before performing the operations described from page 47, perform the operations below. If these operations are not performed, the WFT Pairing Software described on page 48 may not start. Open the [C Drive]  [Program Files]  [Canon]  [EOS Utility]  [WFTPairing] folder (in this order), and then double-click the [WFT FirewallSettings] icon. After performing this operation, perform the operations described from page 47.

WFTserver

MediaServ.

Chapter 4 (p.53)

Chapter 5 (p.65)

Configuring Network Settings

COPY

Virtual Keyboard Operation

The virtual keyboard is displayed when entering the encryption key, server name, and other information.

Switching between input areas

To switch between input areas, press the <Q> button.

Moving the cursor

To move the cursor, turn the <5> dial. You can also move the cursor using <9>.

Entering text

In the bottom input area, turn the <5> dial to move the cursor and press <0> to enter text. You can also move the cursor using <9>. You can check how many characters you have entered by referring to [*/5] in the upper-right corner of the screen.

Deleting text

If you make a mistake, press the <L> button to erase characters.

Confirming entries

Press the <7> button to confirm what you have entered and go to the next screen.

Canceling entries

Press the <6> button to erase the entry and return to the previous screen.

COPY

+ 96 hidden pages