Canon SmartBase PC1210D, SmartBase PC1230D, SmartBase PC1270D pc1200s-017

SERVICE BULLETIN

Issued by Canon Europa N.V.

FAX

MODEL:

Date: 22.11.02

SmartBase PC1230D

SmartBase PC1270D

No.: PC1200S-017 Rev. 1

(FF-T01-L6-000056-01)

LOCATION: ADF ASSEMBLY (2/2)

SUBJECT: THE SHAPE OF MEMBER PART CHANGED

Reason :

Outline :

For manufacturing reasons

XD2-1100-242 (RING, E; See 507 in the attachment) prevented coming off of
FC5-0054-000 (SHAFT, REGIST PRESSURE ARM; See 37 in the attachment).
However, the shape of the base part attached to FC5-0054-000 is changed this time,
to prevent FC5-0054-000's coming off instead.
Therefore, XD2-1100-242 is not used with this change.
In addition, the groove of FC5-0054-000 to attach XD2-1100-242 is not used.

Service Parts
FC5-0054-000 with groove is stored.
For the products manufactured before this change, XD2-1100-242 is stored.

NOTE)
In the case that FC5-0054-000 cannot be attached to the base part, remove
XD2-1100-242.

Figure 161 of the Parts Catalog (partial)

FAX - 2 - PC1200S-017

AFFECTED MACHINES

Model Starting Serial No.
SmartBase PC1230D EUR UUM-01008
SmartBase PC1230D GER UUX01024
SmartBase PC1230D FRN UUY-00345
SmartBase PC1230D ITA UUZ-00193
SmartBase PC1230D UK QTK-00457
SmartBase PC1230D RUSSIA TTH-00477