Canon SmartBase PC1210D, SmartBase PC1230D, SmartBase PC1270D pc1200s-007

SERVICE BULLETIN

Issued by Canon Europa N.V.

FAX

MODEL:

LOCATION: READER ASSEMBLY

SUBJECT: ADDITION OF A HOLE

Reason :

Outline :

SmartBase PC1230D

SmartBase PC1210D
SmartBase PC1270D

To improve the ease of attaching and detaching the fixing unit.

A hole is made on the frame (of the reader unit) from which a screwdriver can be
inserted. (See the photo below.)

There is a possibility that vapor from the fixing unit might come out of this hole, and it
makes the copyboard glass dirty, resulting in image failures. To prevent such an
adverse effect, the shape of the press down guide (FB6-0211) is changed.

Be sure to use the new press down guide (FB6-0211-020) for the new reader frame
to which the change is made. The new press down guide (FB6-0211-020) can be
used for the old reader frame to which the change is not made.

How to detach the fixing unit:

1. Displace the reader unit by 50mm and uncover the hole on the frame (of the
reader unit).

2. Insert a long screwdriver into the hole on the frame (of the reader unit).

3. Put your hand under the frame from the left side of the photo and engage the tip
of the screwdriver with the screw.

4. Loosen the screw.

No.: PC1200S-007 Rev. 1
(FF-T01-L6-000026-02)
Date: 27.09.02

FAX - 2 - PC1200S-007 Rev. 1

When the hole on the frame (of the reader unit) is uncovered (When the reader unit is displaced by 50mm)

When the hole on the frame (of the reader unit) is covered

FB6-0211-000(Before change)

FB6-0211-020 (After change)