SERVICE BULLETIN
Issued by Canon Europa N.V.
COPIER
MODEL:
SmartBase PC1230D,
SmartBase PC1210D,
SmartBase PC1270D
Date: 26.07.02
No.: PC1200S-005
(FF-T01-L6-000023-01)
LOCATION: PAPER FEEDER ASSEMBLY
SUBJECT: CHANGE OF SHAPE AND MATERIAL OF FEEDER BEARING
Reason :
Outline :
Measure to prevent the feeder bearing from breaking during assembling.
1. The weld line is created on the feeder bearing upon welding due to the
position of the sprue.
This weld line makes the feeder bearing brittle, resulting in the breakage
during assembling.
To improve the strength, the shape of the feeder bearing is changed.
2. The breakage still occurred during the drop test after the aforementioned
measure was taken.
Therefore, the material of the feeder bearing is also changed from LA541 to
Delrin500P.
3. While the revision number of the service part number is not advanced, all the
service parts to be stocked are the new parts to which these changes have been
made.
4. It is difficult to make the distinction between the old and new parts because the
difference in shape is between 0.1mm and 0.2mm and there is little difference in
color.
Parts
Part Name Part No. UNIT No. Qty IC Location
Old BUSHING FB6-0261-000 1 NY
New BUSHING FB6-0261-000 1
COPIER - 2 - PC1200S-005
Serial No.
Product Code Model Rev No. Starting Serial No.
SmartBase PC1210D C.EUR UUK2605
SmartBase PC1210D GER UUU1606
SmartBase PC1210D FRN UUV0577
SmartBase PC1210D ITA UUW0401
SmartBase PC1210D UK QTJ0603 SmartBase
Smart Base PC1230D C.EUR UUM1008
Smart Base PC1230D GER UUX1024
Smart Base PC1230D FRN UUY0345
Smart Base PC1230D ITA UUZ0193
Smart Base PC1230D UK QTK487
Smart Base PC1230D RUSSIA TTG515
Smart Base PC1230D RUSSIA TTH477