CapturePerfect Setup Guide
The setup disc included with the scanner contains the following software:
● ISIS/TWAIN driver
This driver allows this scanner to be used with ISIS-compatible application
software or TWAIN-compatible application software. The driver must be
installed in order to be able to use the scanner.
● CapturePerfect
This is a TWAIN-compatible software application. Install this application
if necessary.
This Setup Gide explains the procedure how to install the CapturePerfect.
As for the installation of the ISIS/TWAIN Driver, please refer to the separated
manual “ISIS/TWAIN Driver Instructions”.
Notice
Before installing the CapturePerfect, be sure to open and read the Readme.txt
file on the setup disc.
Installing CapturePerfect
Follow the procedure described below to install CapturePerfect.
1.
Turn on your PC. Windows starts.
Notice
If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,
or Windows XP, be sure to log on as a user with administrator privileges.
2.
Load the setup disc in the PC’s CD-ROM drive.
3.
On the Start menu, click Run.
The Run dialog box appears.
4.
In the Open box, type “D:\CapturePerfect\Setup.exe” (where “D” is the drive
letter assigned to your CD-ROM drive) and then click the OK button.
The Installer starts.
5.
Follow the instructions on the screen and complete the installation process.