Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Compact Power
Adapter
CA-DC30/
CA-DC30E
Camera
Interface Cable
IFC-400PCU
* Do not peel off the battery pack label.
● Printed matter is also included.
● A memory card is not included (
Battery Pack
NB-9L*
Wrist Strap
=
3).
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
2
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of
capacity.
● microSD memory cards*
● microSDHC memory cards*
● microSDXC memory cards*
* Memory cards conforming to SD standards. However, not all memory cards have
been veried to work with the camera.
Preliminary Notes and Legal
Information
● Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and afliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
● Images recorded by the camera shall be for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note
that even for personal use, photography may contravene copyright
or other legal rights at some performances or exhibitions, or in some
commercial settings.
● The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
● Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specications, in rare cases some pixels may be defective or
may appear as red or black dots. This is not a malfunction. They do
not affect the images recorded.
● The LCD monitor may be covered with a thin plastic lm for protection
against scratches during shipment. If covered, remove the lm before
using the camera.
● When the camera is used over an extended period, it may become
warm. This is not a malfunction.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
3
Part Names and Conventions in This
Guide
(1) Lens
(2) Shutter ring
(3) Zoom ring
(4) Microphone
● In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
● Shooting modes and on-screen icons and text are indicated in
brackets.
: Important information you should know
●
: Notes and tips for expert camera use
●
●=xx: Pages with related information (in this example, “xx” represents
a page number)
● Instructions in this guide apply to the camera under default settings.
● For convenience, all supported memory cards are simply referred to as
the “memory card”.
● The symbols “
how the function is used - whether for still images or movies.
Still Images” and “ Movies” below titles indicate
(5) Flash/lamp (front)
(6) Strap mount
(7) Power button/power lamp
● Realize the joy of photos and movies (Creative Shot)
=
-
30
● Realize the joy of photos
=
30
-
● Realize the joy of movies
=
31
-
● Shoot in the optimal settings for self portrait (Self Portrait)
=
52
-
View
● View images (Playback Mode)
=
-
63
● Erase images
=
72
-
● Share images by the Wi-Fi functions
=
80
-
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
10
Safety Precautions
● Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
● The safety precautions noted here are intended to prevent you and
other persons from being injured or incurring property damage.
● Be sure to also check the guides included with any separately sold
accessories you use.
Warning
● Do not trigger the ash in close proximity to people’s eyes.
This may damage your eyesight. In particular, remain at least 1 meter (3.3
feet) away from infants when using the ash.
● Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
Date/time battery (if removable): Dangerous if swallowed. If this occurs,
contact a doctor immediately.
● Use only recommended power sources.
● Do not disassemble, alter, or apply heat to the product.
● Do not peel off the label, if the battery pack has one.
● Avoid dropping or subjecting the product to severe impacts.
● Do not touch the interior of the product if it is broken, such as when
dropped.
● Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
● Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
● Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
Denotes the possibility of serious injury or death.
This could result in electrical shock or re.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
● Do not look through the viewnder (if your model has one) at intense
light sources, such as the sun on a clear day or an intense articial
light source.
This could damage your eyesight.
● Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or re. Immediately stop using the
product and distance yourself from it.
● Use only the recommended battery pack/batteries.
● Do not place the battery pack/batteries near or in direct ame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, re, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately ush with water.
● If the product uses a battery charger, note the following precautions.
- Remove the plug periodically and, using a dry cloth, wipe away any
dust and dirt that has collected on the plug, the exterior of the power
outlet, and the surrounding area.
- Do not insert or remove the plug with wet hands.
- Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
- Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
- Do not cut, damage, alter, or place heavy items on the power cord, if
your product uses one.
This could result in electrical shock or re.
● Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices
is restricted, such as inside airplanes and medical facilities.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
11
● Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
● On products that raise and lower the ash automatically, make sure to
avoid pinching your ngers with the lowering ash.
This could result in injury.
Before Use
Basic Guide
Advanced Guide
Caution
● When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
● Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
● Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
● When using the ash, be careful not to cover it with your ngers or
clothing.
This could result in burns or damage to the ash.
● Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, re, burns, or other injuries.
Overheating and damage may result in electrical shock, re, burns, or
other injuries.
● The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
● When using optional lenses, lens lters, or lter adapters (if
applicable), be sure to attach these accessories rmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
Denotes the possibility of injury.
Caution
● Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense articial light source.
Doing so may damage the image sensor or other internal components.
● When using the camera on a sandy beach or at a windy location, be
careful not to allow dust or sand to enter the camera.
● On products that raise and lower the ash automatically, do not push
the ash down or pry it open.
This may cause the product to malfunction.
● Wipe off any dust, grime, or other foreign matter on the ash with a
cotton swab or cloth.
The heat emitted from the ash may cause foreign matter to smoke or the
product to malfunction.
● Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
● Before you discard the battery pack/batteries, cover the terminals with
tape or other insulators.
Contacting other metal materials may lead to re or explosions.
Denotes the possibility of property damage.
Index
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
12
● Unplug any battery charger used with the product when not in use. Do
not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in re.
● Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or
explosion, resulting in product damage or re.
● Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
● If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
This may cause the product to malfunction.
● Do not place anything which is easily inuenced by magnetism such
as a credit card near the screen.
Data may be lost because a magnet (1) is attached to the back of the
screen.
● Do not sit down with the camera in your pants pocket.
Doing so may cause malfunctions or damage the screen.
● When putting the camera in your bag, ensure that hard objects do not
come into contact with the screen. Also close the screen (so that it
faces the body), if your product’s screen closes.
Index
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
13
Basic Guide
Touch-Screen Operations
The camera’s touch-screen panel enables intuitive operation simply by
touching or tapping the screen.
Before Use
Basic Guide
Advanced Guide
Basic Operations
Basic information and instructions, from initial preparations to shooting
and playback
Touching
Dragging
Touch the screen briey with your
nger.
● This gesture is used to shoot, congure
camera functions, and so on.
Touch the screen and move your nger
across it.
● This gesture is used in Playback mode
to switch to the next image, or to change
the magnied image area, among other
operations.
Index
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
14
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
● Thread the end of the strap through the
strap hole (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
● The strap can also be attached to the left
side of the camera.
Inserting and Charging the Battery Pack
Install and charge the battery pack in the camera. Be sure to charge the
battery pack initially, because the camera is not sold with the battery pack
charged.
Open the cover.
1
● Slide the cover (1) and open it (2).
Insert the battery pack.
2
● Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
● If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always conrm that the
battery pack is facing the right way and
locks when inserted.
Close the cover.
3
● Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
15
Connect the compact power
4
adapter.
● With the camera turned off, open the
cover (1). With the smaller plug of the
included interface cable (=
orientation shown, insert the plug fully
into the camera terminal (2).
● Insert the larger plug of the interface
cable into the included compact power
adapter.
Charge the battery pack.
5
● CA-DC30: Flip out the plug (1) and plug
the compact power adapter into a power
outlet (2).
● CA-DC30E: Plug the power cord into the
compact power adapter, then plug the
other end into a power outlet.
● Battery charging begins, and the USB
charge lamp is lit.
● When charging is nished, the lamp is
turned off.
● Remove the compact power adapter from
the power outlet and the interface cable
from the camera.
2) in the
● To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
● For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
● For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
“Number of Shots/Recording Time, Playback Time” (
● You can view images even while the battery is charging, by
turning the camera on and entering Playback mode (
However, you cannot shoot while the battery is charging. Also
note that the camera cannot be used unless the battery is in it.
● Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
● The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
=
=
133).
21).
Using a Computer to Charge the Battery
You can also charge the battery by inserting the larger plug of the
interface cable into a computer’s USB terminal in step 4 of “Inserting and
Charging the Battery Pack” (=
on the computer, refer to the computer user manual.
● The battery pack cannot be charged in some computers without
the memory card. Install the memory card to the camera
=
17) before connecting the USB terminal of the computer.
(
15). For details about USB connections
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
16
Removing the Battery Pack
● Open the cover and press the battery
lock in the direction of the arrow.
● The battery pack will pop up.
Inserting the Memory Card
Insert a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(=
108).
Open the cover.
1
● Open the monitor (1).
● Slide the cover (2) and open it (3).
Close the cover.
3
● Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
● For guidelines on how many shots or hours of recording can
be saved on one memory card, see “Number of 4:3 Shots per
Memory Card” (
=
134).
Removing the Memory Card
● Open the cover and push the memory
card in until it clicks, and then slowly
release the memory card.
● The memory card will pop up.
Setting the Date and Time
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Insert the memory card.
2
● Insert the memory card facing as shown
until it clicks into the locked position.
● Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
Turn the camera on.
1
● Press the power button.
● The [Date/Time] screen is displayed.
Index
Accessories
9
Appendix
10
17
Set the date and time.
2
● Touch the option to congure, and then
touch [ ][ ] to adjust the setting.
● When nished, touch [Next].
Specify your home time zone.
3
● Touch [ ][ ] to choose your home time
zone.
Finish the setup process.
4
● Touch [OK] when nished. After a
conrmation message, the setting screen
is no longer displayed.
● To turn off the camera, press the power
button.
● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
● To set daylight saving time (1 hour ahead), touch [ ] and
choose [
] in step 2.
Changing the Date and Time
Adjust the date and time as follows.
Access the menu screen.
1
● Touch [], and then touch [].
Choose [Date/Time].
2
● Touch the [ ] tab.
● Drag up or down across the screen to
choose [Date/Time].
● Touch [Date/Time].
Change the date and time.
3
● Follow step 2 in “Setting the Date and
Time” (=
● Double-touch [
screen.
● Date/time settings can be retained for about 3 weeks by the
camera’s built-in date/time battery (backup battery) after the
battery pack is removed.
● The date/time battery will be charged in about 4 hours once you
charge the battery or connect the camera to an AC adapter kit
(sold separately,
● Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on.”Setting the Date and
Time” (
=
112), even if the camera is left off.
=
17) Set the correct date and time as described in.
17) to adjust the settings.
] to close the menu
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
18
Display Language
Change the display language as needed.
Enter Playback mode.
1
● Press the [] button.
Access the setting screen.
2
● Touch and hold [] until the setting
screen is displayed.
Set the display language.
3
● Touch a display language to choose it,
and then touch the chosen language
again.
● Once the display language has been set,
the setting screen is no longer displayed.
● If there are images on the memory card, touch [] in the
lower left to access [
● You can also change the display language by touching []
and then [
] tab.
[
], and then choosing [Language ] on the
Trying the Camera Out
Before Use
Still Images
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Movies
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
Turn the camera on.
1
● Press the power button.
● The startup screen is displayed.
Enter [] mode.
2
● Set the mode switch to [].
].
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
19
● Touch [] and [ ] or [ ], drag the
screen vertically, and touch [].
● To conrm your choice, touch [OK].
● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
● Icons representing the scene and image
stabilization mode are displayed in the
upper left of the screen.
● Frames displayed around any detected
subjects indicate that they are in focus.
Compose the shot.
3
● If the zoom ring is turned in the direction
of [], the subject gets larger. If the
zoom ring is turned in the direction of
[ ], the subject gets smaller.
Shoot.
4
Shooting Still Images
1) Focus.
● Press the shutter ring lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
2) Shoot.
● Press the shutter ring all the way down.
● As the camera shoots, a shutter sound
is played, and in low-light conditions, the
ash res automatically.
● Keep the camera still until the shutter
sound ends.
● After displaying your shot, the camera will
revert to the shooting screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
20
(1)(2)
(1)
Shooting Movies
1) Start shooting.
● Touch [ ]. The camera beeps once
as recording begins, and [ Rec] is
displayed with the elapsed time (1).
● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
● Frames displayed around any detected
faces indicate that they are in focus.
2) Finish shooting.
● Touch [ ]. The camera beeps twice as
recording stops.
● If you set the mode switch to [] in step 2, the camera
proposes images from which you can nd new expressions and
new ideas which can make you realize the joy of photos and
movies by simple operations of just shooting (Creative Shot
=
Mode) (
30).
Viewing
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
1
● Press the [] button.
● Your last shot is displayed.
Choose an image.
2
● To view the next image, drag right to
left across the screen, and to view the
previous image, drag left to right.
● You can also view the next image by
touching the right edge of the screen (1).
In this case, [
you can view the previous image by
touching the left edge of the screen (2).
[ ] is displayed.
● Touch and hold [
images quickly.
● Movies are identied by a [
play movies, go to step 3.
Play movies.
3
● Touch [ ] to start playback.
● To adjust the volume, quickly drag up or
down across the screen during playback.
● After the movie is nished, [
displayed.
] is displayed. Similarly,
][ ] to browse through
] icon. T o
] is
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
● Press the shutter ring halfway in the playback mode when the
lens is out to enter the shooting mode (except while charging is in
=
progress (
15)).
21
Erasing
You can choose and erase unneeded images one by one. Note that
erased images cannot be recovered. Be sure that you want to erase all
Wi-Fi settings before using this option.
Choose an image to erase.
1
● Drag left or right across the screen to
choose an image.
Erase.
2
● Touch [], drag up or down on the
screen, and then touch [ ] to choose it.
● After [Erase?] is displayed, touch [Erase].
● The current image is now erased.
● To cancel erasure, touch [Cancel].
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
● Images can also be erased by using Touch Actions (=
● You can choose multiple images to erase at once (
=
72).
76).
22
Advanced Guide
1
Camera Basics
Other basic operations and more ways to enjoy your camera, including
shooting and playback options
On/Off
Shooting Mode
● Press the power button to turn the
camera on and prepare for shooting.
● To turn the camera off, press the power
button again.
Playback Mode
● Press the [] button to turn the camera
on and view your shots.
● While the power is on, the mode is
switched between the playback mode
and shooting mode every time the [
button is pressed.
● To turn off the camera, press the power
button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
]
5
Playback Mode
6
Wi-Fi Functions
7
● Press the shutter ring halfway (=
when the lens is out to enter the shooting mode (except while
charging is in progress (
24) in the playback mode
=
15)).
Index
Setting Menu
8
Accessories
9
Appendix
10
23
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specic period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of
inactivity. In about two more minutes, the lens is retracted and the camera
turns itself off. To activate the screen and prepare for shooting when
the screen is off but the lens is still out, press the shutter ring halfway
(=
24).
Power Saving in Playback Mode
The camera turns itself off automatically after about ve minutes of
inactivity.
● The camera’s power-saving functions are deactivated while
the camera is connected with an interface cable (
connected to other devices via Wi-Fi (
=
80).
=
115) or
Shutter Ring
To ensure your shots are in focus, always begin by holding the shutter ring
halfway down, and once the subject is in focus, press the button all the
way down to shoot.
In this manual, shutter ring operations are described as pressing the
button halfway or all the way down.
Press halfway. (Press lightly to
1
focus.)
● Press the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
Press all the way down. (From the
2
halfway position, press fully to
shoot.)
● The camera shoots, as a shutter sound
is played.
● Keep the camera still until the shutter
sound ends.
● The shutter ring can be pressed halfway
or all the way down in all directions such
as down, left and right, and diagonally.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
24
● Images may be out of focus if you shoot without initially pressing
the shutter ring halfway.
● Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Holding the Camera
This camera can shoot in the normal holding style as well as various
other holding styles by free angle (free style) from which you can nd new
shooting styles.
Holding Style in Normal Shooting
● Place the strap around your wrist.
● When shooting, keep your arms close to
your body and hold the camera securely
by both hands to prevent it from moving.
Do not rest your ngers on the ash.
● The camera shoots when you press the
shutter ring from the direction easy to
press toward the center of the lens.
Low-angle Holding Style
● Hold the camera in a position lower than
the eye line and adjust the angle so that
the screen is easy to see.
● The shutter ring can be pressed vertically,
horizontally, and diagonally. You can
shoot in a comfortable position even
when changing the holding style in
accordance with the subject to shoot and
composition.
High-angle Holding Style
● If the camera is turned upside down, the
screen display is ipped vertically, so hold
the camera in a position higher than the
eye level and adjust the angle so that the
screen is easy to see.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
25
Self Portrait Holding Style
● If the screen opens at 180 degrees,
the screen display will also be ipped
vertically so hold the camera securely by
the hand with the strap around its wrist.
● If you touch [
the lower left, the camera will operate in
[ ] mode (=
● Store the camera closed while you do not use it.
● The screen opens up to approximately 180 degrees. Do not open
it forcibly because it may damage the camera.
] while [ ] is displayed in
52).
Shooting Display Options
Touch [] to view other information on the screen, or to hide the
information. For details on the information displayed, see “On-Screen
Information” (=
127).
Information is displayed
No information is displayed
● Screen brightness is automatically increased by the night view
function when you are shooting under low light, making it easier
to check how shots are composed. However, on-screen image
brightness may not match the brightness of your shots. Note that
any on-screen image distortion or jerky subject motion will not
affect recorded images.
● For playback display options, see “Switching Display Modes”
=
64).
(
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
26
Using the FUNC. Menu
(1)
Congure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(=
129) or playback mode (=
(2)
132).
Access the FUNC. menu.
1
● Touch [].
Choose a menu item.
2
● Drag the menu up or down to scroll it, or
touch a menu item (1) to choose it.
● You can also scroll the menu by dragging
up or down outside of the menu area.
● Touch your chosen menu item again, or
touch an option at right (2).
Choose an option.
3
● Drag the options up or down to scroll
them, or touch an option to choose it.
● You can also scroll the options by
dragging up or down outside of the option
area.
Finish the setup process.
4
● Touch your chosen option again, or touch
[ ].
● The screen before you touched [
in step 1 is displayed again, showing the
option you congured.
● To undo any accidental setting changes, you can restore the
camera’s default settings (
● On the screen in step 2, you can also choose options by touching
an option in the menu at right.
=
110).
Before Use
Basic Guide
]
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
27
Using the Menu Screen
Congure a variety of camera functions through the menu screen as
follows. Menu items are grouped by purpose on tabs, such as shooting
[ ], playback [], and so on. Note that available menu items vary
depending on the selected shooting or playback mode (=
=
132).
Access the menu screen.
1
● Touch [], and then touch [].
Choose a tab.
2
● Touch a tab to choose it.
130 –
Choose a menu item.
3
● Drag the menu items up or down to scroll
them, or touch a menu item to choose it.
● For menu items with options not shown,
rst touch the item to switch screens, and
then either drag up or down to scroll or
touch an item to choose it.
● To return to the previous screen, touch
].
[
Choose an option.
4
● For options displayed with [ ][ ] on
either side, touch [ ][ ] to change the
option.
● For menu items displayed with a bar
to indicate the level, touch the desired
position on the bar.
Finish the setup process.
5
● Touch [ ] to return to the screen
displayed before you touched []
in step 1.
● To undo any accidental setting changes, you can restore the
camera’s default settings (
● You can also choose the tab by moving the zoom ring in step 2.
=
110).
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
28
On-Screen Keyboard
(1)
Use the on-screen keyboard to enter information for Face ID (=
Wi-Fi connections (=
information you can enter varies depending on the function you are using.
80), and so on. Note that the length and type of
Entering Characters
● Touch the characters to enter them.
● The amount of information you can enter
(1) varies depending on the function you
are using.
Moving the Cursor
● Touch [ ] [ ].
Entering Line Breaks
● Touch [ ].
Switching Input Modes
● Touch [ ] to switch to numbers or
symbols.
● Touch [
● Available input modes vary depending on
the function you are using.
Deleting Characters
● Touch [] to delete the previous
character.
Conrming Input and Returning to the
Previous Screen
● Touch [ ].
] to enter capital letters.
43),
Indicator Display
The indicator of the camera (=
camera status.
IndicatorColor
Power
Lamp
USB
Charge
Lamp
Green
Orange
● When the power lamp blinks green, never turn the camera off,
open the memory card or battery cover, or shake or jolt the
camera, which may corrupt images or damage the camera or
memory card.
Indicator
Status
On
Blinking
OnCharging
BlinkingCharging error
4) lights up or blinks depending on the
Camera Status
=
Connected to a computer (
or display off (=
Starting up, recording/reading/
transmitting images, or connecting/
transmitting via Wi-Fi
24, =
115),
108)
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
29
2
Creative Shot Mode
Shoot multiple still images with effects using camera-determined settings
Realizing the Joy of Photos and
Movies (Creative Shot)
Still Images
The camera proposes images from which you can nd new expressions
and new ideas which can make you realize the joy of photos and movies
by simple operations of just shooting.
Realizing the Joy of Photos
If you press the shutter ring once, the camera will take three shots. The
camera can record a total of six images including ve images which can
make you realize the joy of photos and one normal image by automatically
adding various effects determining the subject and shooting conditions,
emphasizing the subject, etc.
Enter [] mode.
1
● Set the mode switch to [].
Shoot.
2
● Hold the camera steady until the shutter
sound is played three times because if
you press the shutter ring all the way
down, the camera will take three shots.
● After the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
● For full-screen display, choose an image
by touching it. To return to the original
display, touch [
].
Movies
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Creative Shot Mode
2
Auto Mode / Hybrid Auto
3
Mode
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
10
Index
30
Loading...
+ 110 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.