Canon LV-5210, LV-7210 Owner's Manual

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

LV-5210/7215/7210

EXPAND SERIAL COMMAND

FUNCTIONAL SPECIFICATION

Page 1

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

CONTENTS

1. Overtview

2. Serial Interface Specification

2.1 Communication Specification

2.2 Connection

3. Note for communications

4. Name Definition

5. Functional Execution Command table

5.1 Image Command Table

5.2 PC Control Command Table

5.3 VIDEO Control Command Table

5.4 Input Control Command Table

5.5 Screen Command Table

5.6 Lamp Command Table

5.7 Sound Command Table

5.8 Setting Command Table

6. Status Read Command Table

6.1 IMAGE Status Read Command table

6.2 PC Status Read Command Table

6.3 VIDEO Status Read Command Table

6.4 Input Status Read Command Table

6.5 Screen Status Read Command Table

6.6 Lamp Status Read Command Table

6.7 Sound Status Read Command Table

6.8 Setting Status Read Command Table

6.9 Other Status Read Command Table

7. Error Code Table

8. Functional Execution Command

8.1 Format

8.2 Transfer Example

8.3 Operation Requirements

8.4 Image Command

8.4.1 CF_BRIGHT COMMAND

8.4.2 CF_CONT COMMAND

8.4.3 CF_COLOR COMMAND

8.4.4 CF_TINT COMMAND

8.4.5 CF_SHARP COMMAND

8.4.6 CAMMA COMMAND

Page 2

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

8.4.7 WBAL COMMAND

8.4.8 COLTEMP COMMAND

8.4.9 PROGV COMMAND

8.4.10 IMGE COMMAND

8.4.11 CF IMAGE ADJ COMMAND

8.5 PC Control command

8.5.1 CF_FSYNC COMMAND

8.5.2 CF_TDOTS COMMAND

8.5.3 CF_CLAMP COMMAND

8.5.4 CF_H-POS COMMAND

8.5.5 CF_V-POS COMMAND

8.5.6 CF_DDOTS COMMAND

8.5.7 CF_DLINE COMMAND

8.5.8 CF_PC STORE COMMAND

8.5.9 CF_PC MODE FREE COMMAND

8.6 VIDEO Control Command

8.6.1 CF_AVDDOTS COMMAND

8.6.2 CF_AVDLINECOMMAND

8.6.3 CF_AVHPOS COMMAND

8.6.4 CF_AVVPOS COMMAND

8.6.5 CF_AVSERV COMMAND

8.7 Input Control Command

8.7.1 CF_INPUT COMMAND

8.7.2 CF_SOURCE COMMAND

8.7.3 CF_INPUT_%1_%2 COMMAND

8.7.4 CF_SYSTEM COMMAND

8.8 Screen Control Command

8.8.1 CF_SCREEN COMMAND

8.8.2 CF_FLSCREN COMMAND

8.8.3 CF_UE COMMAND

8.8.4 CF_CENT COMMAND

8.8.5 CF_KEYSTONE COMMAND

8.8.6 CF_KYSTNMODE COMMAND

8.9 Lamp Command

8.9.1 CF_LAMOPH COMMAND

8.9.2 CF_ALMP MODE COMMAND

8.10 Sound Command

8.10.1 CF_VOLUME COMMAND

8.10.2 CF_MUTE COMMAND

Page 3

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

8.11 Setting Command

8.11.1 CF_BBACK COMMAND

8.11.2 CF_DISPCOMMAND

8.11.3 CF_LOGOCOMMAND

8.11.4 CF_CEILCOMMAND

8.11.5 CF_REARCOMMAND

8.11.6 CF_RCODE COMMAND

8.11.7 CF_LANGCOMMAND

8.11.8 CF_ON-STACOMMAND

8.11.9 CF_P-MANECOMMAND

8.11.10 CF_P-MANETIMECOMMAND

8.11.11 CF_FANSPEEDCOMMAND

8.11.12 KEYDISCOMMAND

8.11.13 TERMINALCOMMAND

8.11.14 STANDBYMODEOCOMMAND

8.11.15 POINTERCOMMAND

8.11.16 FDEFAULTCOMMAND

8.11.17 LOGOCAPTURECOMMAND

9. Status Read Command

9.1 Format

9.2 Transfer Example

9.3 Operation Requirement

9.4 IMAGE COMMAND

9.4.1 CR-BRIGHTCOMMAND

9.4.2 CR-CONTCOMMAND

9.4.3 CR-COLORCOMMAND

9.4.4 CR-TINTCOMMAND

9.4.5 CR-SHARPCOMMAND

9.4.6 CR-GAMMACOMMAND

9.4.7 CR-WBAL-RCOMMAND

9.4.8 CR-WBAL-GCOMMAND

9.4.9 CR-WBAL-BCOMMAND

9.4.10 CR-COLTEMPCOMMAND

9.4.11 CR-PROGVCOMMAND

9.4.12 CR-IMAGECOMMAND

9.4.13 CR-IMGGMD COMMAND

9.5 PC COMMAND

9.5.1 CR-FSYNC COMMAND

9.5.2 CR-TDOTS COMMAND

Page 4

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

9.5.3 CR-CLAMP COMMAND

9.5.4 CR-H-POS COMMAND

9.5.5 CR-V-POS COMMAND

9.5.6 CR-DDOTS COMMAND

9.5.7 CR-DLINECOMMAND

9.5.8 CR-PC STORECOMMAND

9.5.9 CR-SET PC ADJ COMMAND

9.6 Video Command

9.6.1 CR_SERSYSCOMMAND

9.7 Input Command

9.7.1 CR-INPUTCOMMAND

9.7.2 CR-COURCECOMMAND

9.7.3 CR-INPUT_%1COMMAND

9.7.4 CR-SYSTEMCOMMAND

9.8 Screen Command

9.8.1 CR-SCREENCOMMAND

9.8.2 CR-FLSCRENCOMMAND

9.8.3 CR-TRUECOMMAND

9.8.4 CR-KYSTONMODECOMMAND

9.9 Lamp COMMAND

9.9.1 CR_LAMPREPLCOMMAND

9.9.2 CR-LAMPMODECOMMAND

9.9.3 CR-PROJECOMMAND

9.10 Sound Status COMMAND

9.10.1 CR-VOLUMECOMMAND

9.10.2 CR-MUTECOMMAND

9.11 Setting Status COMMAND

9.11.1 CR-BBACKCOMMAND

9.11.2 CR-DISPCOMMAND

9.11.3 CR-RCODECOMMAND

9.11.4 CR-LANGCOMMAND

9.11.5 CR-ON-STACOMMAND

9.11.6 CR-P-MANE COMMAND

9.11.7 CR-P-MANETIMECOMMAND

9.11.8 CR-FANSPEEDCOMMAND

9.11.9 CR-KEYDISCOMMAND

9.11.10 CR-TERMINALCOMMAND

9.11.11 CR-STANDBYMODECOMMAND

9.11.12 CR-POINTERCOMMAND

Page 5

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

9.12 Other Status Read Command

9.12.1 CR-SIGNAL COMMAND

9.12.2 CR-VMUTECOMMAND

9.12.3 CR-FREEZECOMMAND

9.12.4 CR-PTIMERCOMMAND

9.12.5 CR-TEMPWARNCOMMAND

9.12.6 CR-TEMPFAILCOMMAND

Page 6

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

1 Outview

1.1 This Functional Specification defines communication functions such as Wireless Imager for

LV-5210/7215/7210.

1.2 The Projector Firmware Ver.1.x-ready.

1.3 Commands are to communicate to such as Wireless Imager, but most commands control a

remote projector with PC installed RS232C. That’s why commands are defined as expand

serial commands

2 Serial Interface Specification

2.1 Communication Specification

Specification

Synchro System Asynchronou

2.2 Connection

Must use a dedicated serial cable that come with the projector for a connection to a

COMPUTER and a projector.

Transmission Speed

9600 / 19200

Data Length 8 bit

Parity N/A

Stop Bit 1

Flow Control N/A

Note1) transfer rate: initial setting value is 19200

Note2) transfer rate can be changed by service MODE

PC Projector

COM No.1 Control Port

RXD

TXD

DTR

DSR

RTS

CTS

RING

(D-Sub 9 Pin) (Mini DIN 8 Pin)

Page 7

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

3 Note for communications

3.1 The expand command is defined one Command/one line that starts ”C” and ends carriage

return (0x0D)

3.2 When a projector receives carriage return (0x0D), it starts decoding.

-Functional Execution

(Ex.) ”CF_BRIGHT_032” [CR]

-Status Read Command

(Ex.) “CR_RIGHT” [CR] Note) _means a space

3.3 When it takes more than one second to receive one Command, it does not execute the Command.

Since the projector has received the first data “C”, when it takes more than 1 second until the

projector receives a carriage return (0x0D), it clears information of buffer.

3.4 When a COMPUTER keeps sending some Command, it must wait sending next command after

100ms when the COMPUTER receives the return command.

More than 100ms

Command

PC Projector “CF_BRIGHT_032” CR Next Command

Projector PC “000” CR

Response

(A few ms -- 5s)

3.4.1 When a COMPUTER sends next command before receiving a return command, the

projector may not operate properly.

3.4.2 Except no response after 5 seconds

3.5 It takes about 5 seconds for internal initialization after plugging in AC. During this time it

cannot process command. Do not issue any commands.

4 Name Definition

4.1 Data from a controller to a projector is represented as COMMAND, and data from a projector to

a controller for the incoming command is represented as RESPONSE.

4.2 [CR]: Carriage Return Code

The Command ends carriage return code. Also response Command ends carriage return, too.

4.3 : Space Code

All space Code is indicated by (_).

4.4 %1: Parameter in Command

When there are some parameters, the parameters are defined as %2, %3…

4.5 %%%: Error Code from a projector

“000”: Normal Reception

See “ 7.Error Code Table “ for error number.

4.6 %a : Parameter for response from a projector

When there are a few parameters, the parameter defines as %b, %c…

Page 8

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

5 Functional Execution Command Table

5.1 Image Command Table Execute Command Item

CF_BRIGHT_%1 [CR] Set Brightness value CF_CONT_%1 [CR] Set Contrast value CF_COLOR_%1 [CR] Set Color value CF_TINT_%1 [CR] Set Tint value CF_SHARP_%1 [CR] Set Sharpness value CF_GAMMA_%1 [CR] Set-GAMMA value CF_WBAL-R_%1 [CR] Set White Balance Red value CF_WBAL-G_%1 [CR] CF_WBAL-B_%1 [CR] Set White Balance Blue value CF_COLTEMP_%1 [CR] CF_PROGV_%1 [CR] Set or Cancel for Progressive CF_IMAGE_%1 [CR] Set Image MODE. CF_IMAGEADJ_%1 [CR] Reset and store for Image Adjustment.

Set White Balance Green value

Set Color Temp. value

5.2 PC Control Command Table Execute Command Item

CF_FSYNC_%1 [CR] CF_TDOTS_%1 [CR] CF_CLAMP_%1 [CR] CF_H-POS_%1 [CR] CF_V-POS_%1 [CR] CF_DDOTS_%1 [CR] CF_DLINE_%1 [CR] CF_PCSTORE_%1 [CR] Store e current PC Adj. Status to MODE 1, 2, 3, 4, or 5. CF_PCMODEFREE_%1 [CR] Reset MODE1, 2, 3, 4, and 5.

Set Fine Sync value. Set Total Dots value. Set Clamp value. Set Horizontal Position value. Set Vertical Position value. Set Display Dots value. Set Display Line value.

5.3 VIDEO Control Command Table Execute Command Item

CF_AVDDOTS_%1 [CR] Set AV Horizontal Resolution Value CF_AVDLINE_%1 [CR] Set AV Vertical Resolution Value CF_AVHPOS_%1 [CR] Set AV Horizontal Position Value. CF_AVVPOS_%1 [CR] Set AV Vertical Position Value.

Reset AV Horizontal /Vertical Resolution that are set in

CF_AVSERV_%1 [CR]

such as CF_AVDDOTS/CF_AVDLINE to default setting.

5.4 Input Control Command Table Execute Command Item

CF_INPUT_%1 [CR] Select Input. CF_SOURCE_%1 [CR] Select Input Sauce. CF_INPUT_%1_%2 [CR] Select Input and Source. CF_SYSTEM_%1 [CR] Select System.

Page 9

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

5.5 Screen Command Table Execute Command Item

CF_SCREEN_%1 [CR] Select Screen size. CF_FLSCREN_%1 [CR] Set and Cancel Full Screen. CF_TRUE_%1 [CR] Set and Cancel True for Screen. CF_DZCENT_%1 [CR] Cancel DIGITAL zooms. CF_KEYSTONE_%1 [CR] Set Keystone CF_KYSTNMODE_%1 [CR] Set Keystone store MODE

5.6 Lamp Command Table Execute Command Item

CF_LAMPH_%1 [CR] Reset lamp total running time. CF_LAMPMODE_%1 [CR] Select lamp MODE.

5.7 Sound Command Table Execute Command Item

CF_VOLUME_%1 [CR] Set Volume value CF_MUTE_%1 [CR] Control Sound Mute ON/OFF

5.8 Setting Command Table Execute Command Item

CF_BBACK_%1 [CR] Set Blue Back function. CF_DISP_%1 [CR] Set Display function. CF_LOGO_%1 [CR] Set Logo function. CF_CEIL_%1 [CR] Set Ceiling function. CF_REAR_%1 [CR] Set Rear Function. CF_RCODE_%1 [CR] Select Remote Control Reception Code. CF_LANG_%1 [CR] Select OSD language. CF_ON-STA_%1 [CR] Set Power ON Start Function. CF_P-MANE_%1 [CR] Set Power management function. CF_P-MANETIME_%1 [CR] Set Power management time CF_FANSPEED_%1 [CR] Select Fan Speed.

CF_KEYDIS_%1 [CR] CF_TERMINAL_%1 [CR] Set TERMINAL.

CF_STANDBYMODE_%1 [CR] Set STANDBYMODE CF_POINTER_%1_%2 [CR] Set POINTER CF_FDEFAULT_%1 [CR] Set Factory Default CF_LOGOCAPTURE_%1 [CR] Capture the current image on the screen.

RC//ＫＥＹ inhibit

Page 10

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

6 Status Read Command Table

6.1 IMAGE Status Read Command Table

Status read command Item

CR_BRIGHT [CR] Get Brightness CR_CONT [CR] Get Contrast CR_COLOR [CR] Get Color CR_TINT [CR] Get Tint CR_SHARP [CR] Get Sharpness CR_GAMMA [CR] Get-GAMMA CR_WBAL-R [CR] White Balance Red CR_WBAL-G [CR] White Balance Green CR_WBAL-B [CR] White Balance Blue CR_COLTEMP [CR] Get Color temperature setting value CR_PROGV [CR] Get Progressive setting value CR_IMAGE [CR] Get Selected. Image CR_IMGGMD [CR] Get Image-GAMMA setting value

6.2 PC Status Read Command Table

Status read command Item

CR_FSYNC [CR] Get Fine Sync setting value CR_TDOTS [CR] Get Total Dots setting value CR_CLAMP [CR] Get Clamp setting value CR_H-POS [CR] Get Horizontal Position setting value CR_V-POS [CR] Get Vertical Position setting value CR_DDOTS [CR] Get Display Dots setting value CR_DLINE [CR] Get Display Line setting value CR_PCSTORE [CR] Get Free or Store is selected. for PC Adj.; MODE 1-5. CR_SETPCADJ [CR] Get current PC signal for PC display status.

6.3 VIDEO Status Read Command Table

Status read command Item

CR_SERSYS [CR]

Get selected. current signal. When in AUTO MODE, it returns a result by AUTO detect.

6.4 Input Status Read Command Table

Status read command Item

CR_INPUT [CR] Get selected. input status CR_SOURCE [CR] Get selected. input Source status CR_INPUT_%1 [CR] Get Input and the Source. CR_SYSTEM [CR] Get selected. system status in input MODE

6.5 Screen Status Read Command Table

Status read command Item

CR_SCREEN [CR] Get selected. screen size status CR_FLSCREN [CR] Get Full Screen MODE CR_TRUE [CR] Get True MODE Setting status. CR_KYSTNMODE [CR] Get Keystone Store MODE setting status

Page 11

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

6.6 Lamp Status Read Command Table

Status read command Item

CR_LAMPREPL [CR] Get information for lamp replacement time. CR_LAMPMODE [CR] Get lamp MODE status CR_PROJH [CR] Get projector total running time.

6.7 Sound Status Read Command Table

Status read command Item

CR_VOLUME [CR] Get Volume value CR_MUTE [CR] Get sound mute setting value

6.8 Setting Status Read Command Table

Status read command Item

CR_BBACK [CR] Get Blue Back setting value CR_DISP [CR] Get Display setting value CR_LOGO [CR] Get Log setting value CR_RCODE [CR] Get selected. remote Control code status CR_LANG [CR] Get selected. language. CR_ON-STA [CR] Get ON Start setting status CR_P-MANE [CR] Get Power management setting status CR_P-MANETIME [CR] Get the start time for Power management CR_FANSPEED [CR] F Get selected. FAN CONTROL SPEED

CR_KEYDIS [CR] CR_TERMINAL [CR] Get TERMINAL setting status.

CR_STANDBYMODE [CR] Get STANDBYMODE Setting Status. CR_POINTER [CR] Get POINTER setting status.

Get ＲＣ/ＫＥＹ prohibit status.

6.9 Other Status Read Command Table

Status read command Item

CR_SIGNAL [CR] Get the status if there is signal or no signal CR_VMUTE [CR] Get No Show setting status CR_FREEZE [CR] Get Freeze Setting Status CR_PTIMER [CR] Get Timer operational status CR_TEMPWARN [CR] Get if sensors are exceeding critical temperature or not

CR_TEMPFAIL [CR]

Get the temperature when sensors approached critical

temperature

Page 12

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

7 Error Code Table

Error/ode Content

? -When receives data that cannot be decoded

-Parameter determination error (digit number

error, and incorrect letter included) 000 101 The function is not available in the selected.

102 Selected. the value is out of range (Selected. value

103 Command mismatched to the Hardware.

201

301 Processing image capture. Re-try it again later.

303

NORMAL Reception（not error）

MODE.

will not be reflected)

(Command for unpopulated option function)

When sending command, the increment is

maximum value or the decrement is minimum value.

Processing Memory Card Viewer. Re-try it again

later.

Page 13

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

8 Functional Execution Command

8.1 Format

１. The following format’s commands issued form a PC

Pattern1:”CF_COMMAND” [CR]

Pattern2:”CF_COMMAND_%1” [CR]

CF_:Header

COMMAND:Letters

%1:Parameter(Letters)

_:Space（To separate COMMAND and parameter）

２. When a projector decoded a received data and ready to receive the next Command, it

will return acknowledgment.

“000” [CR]:（0x06,0x0D）When received Function Execute Command

“nnn” [CR]:Unable to execute any value except “000” value for any specific reason.

See the Ode/ode for its contents

３. When received an undecodable data

Returns”?” [CR]

8.2 Transfer Example

When setting projector total command to 1344 by expand command

PC PJ :”CF_TDOTS_1344” [CR]

PC PJ :”000” [CR] ---------------- Reception OK

8.3 Operation Requirements

When the functional execution command is limited, the projector sends an error command

as shown in the table below.

Projector Status Available Function Execution Command

STANDBYMODE C00:POWER ON

Processing Count Down

Processing Cooling Down N/A Cooling Down due to abnormal temperature Abnormal Temperature N/A Abnormal Power (60sECOnds after Power has turned to abnormal) Processing Power Save Cooling Down N/A

Processing Power Save

Note): When the projector receives other commands in the above status, they return error

C00:POWER ON (Terminate Count Down)

N/A

C00:POWER ON C01:POWER OFF

code to show the status.

Page 14

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

8.4 IMAGE Command

8.4.1 CF_BRIGHT Command

COMMAND “CF_BRIGHT_%1” [CR]

“000-063”------ Directly select the Bright Setting Value

Details

“UP”---------------- Bright setting value +1 “DN”---------------- Bright setting value -1

Set the User control Bright Value The value set by the command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power ON State.

Response

Acceptable “000” [CR]

Unacceptable “Error Code” [CR]

8.4.2 CF_CONTCOMMAND

COMMAND “CF_CONT_%1” [CR]

“000-063”------ Directly select for conntrast setting value

Details

Response

“UP”---------------- Contrast setting value “DN”---------------- Contrast setting value-1

Set the user Control contrast value. The value set by this command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power ON status.)

Acceptable “000” [CR]

Unacceptable “Error Code” [CR]

8.4.3 CF_COLORCOMMAND

COMMAND “CF_COLOR_%1” [CR]

“000-063”------ Directly Color setting value

Details

Response

“UP”---------------- Color setting value+1 “DN”---------------- Color setting value-1

Set the user Control Color value. The value set by this command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power On state.

Acceptable “000” [CR]

Unacceptable “Error Code” [CR]

Page 15

+ 32 hidden pages