Canon IMAGEPROGRAF W8400D User Manual

Moving the Printer

Follow this procedure before moving the printer to protect the internal parts
during moving or shipping.

• If you cannot avoid tilting or standing the printer on end when you are
moving it, please contact the dealer where you purchased the printer
or the nearest service center.

• Before you move the printer, always execute the Move Printer menu
function and follow the directions given by the messages on the
display. The printer may be damaged if you attempt to move it after
disconnecting the power cord before switching off the printer. If you
accidentally disconnect the power cord before switching the printer off,
reattach the power cord, reinstall the ink tanks, then start the
procedure again from Step 1.

• You cannot execute Move Printer once the MTCart Full Soon or
Replace MT-Cart appears. Replace the maintenance cartridge before
executing Move Printer.

• Never tilt the printer while you are moving it. This could spill ink from
the maintenance cartridge and cause ink stains in the surrounding
area.

1 If the printer power is off, press the Power button to switch the printer

on.

After a few moments, Online appears in the display.

2 Press the Online button to display MAIN MENU.

3 Press [ ] or [ ] to select Maintenance, then press [ ].

4 Press [ ] or [ ] to select Move Printer then press [ ].

5 Press [ ] or [ ] to select Yes, then press OK.

Open RightCover is displayed.

6 Open the back right cover.

Remove Ink Tank is displayed on the operation panel.