Canon imagePRESS C6000, imagePRESS C6010, imagePRESS C6010VP, imagePRESS C7010VP Specification Sheet

Two-Knife Booklet Trimmer-A1

Cr e a t e f u l l -b l e e d , s a d d l e -s t i t C h e d

b o o k l e t s i n -l i n e o n y o u r Ca n o n
i m a g e Press C7000VP/C6000VP/C6000.

Canon addresses a top request of the print marketplace with the introduction
of the Two -Knife Booklet Trimmer-A1. The accessory is designed for the
on-demand market where quality expectations are growing, but turnaround
time is shrinking.

Value-added services, such as in-line finishing, can enhance a printed product
and provide additional opportunity to generate revenue. The Two- Knife
Booklet Trimmer-A1 integrates seamlessly with the Booklet Trimmer-C1
and the Saddle Finisher-AB2 to enable three-sided trimming of full-bleed,
saddle-stitched booklets.

The capabilities of this finishing accessory will allow your business to completely
produce and finish a greater variety of jobs in-line, without operator intervention.
By shortening the time it takes to produce and finish the job in-house, you can
meet the tightest deadlines requested by your customers.

Available on a majority of the imagePRESS digital presses, this accessory
eliminates the need for costly off-line finishing equipment and offers a solution
to grow your business. Current imagePRESS digital press owners utilizing the
face trimming ability of the Booklet Trimmer -C1 will be able to upgrade to
three-sided trimming with this accessory.

As part of the imagePRESS finishing solutions, the Two-Knife Booklet
Trimmer- A1 will help you enhance internal productivity and the
competitiveness of your production printing business.

Specifications

Two-Knife BooKleT Trimmer-A1

Paper Size: LTR-R, 11" x 17", LGL, 12" x 18"

Number of Sheets: 20 Sheets/80 Pages (Up to 80gsm/

20 lb. Bond)

15 Sheets/60 Pages (More than

80gsm, up to 105gsm /28 lb. Bond)

10 Sheets/40 Pages (More than

105gsm, up to 128gsm/ 32 lb. Bond)

5 Sheets/20 Pages (More than

128gsm, up to 216gsm/ 80 lb. Cover)

(Note: Only one sheet of cover can

be used up to 300gsm/110 lb. Cover)

Acceptable Paper Weights: 17 lb. Bond-110 lb. Cover

(64gsm-300gsm)

Trimming Width: 2mm-15mm (0.08"-0.59") (Each width

of top and bottom edge)

Minimum width of book in top and

bottom direction; 190mm ( 7.48")

Waste Tray Capacity: Approximately 1,500 sheets of

15mm/0.59" width trimmed piece

Conveyer Tray Capacity: 30 Booklets (LTR, 20 sheets/80

pages, 80gsm/20 lb. Bond)

Conveyer Tray for the Booklet

Trimmer-C1 is attached to the
Two-Knife Booklet Trimmer-A1.

Electric Power Requirement: 120V, 60Hz, 4A

(Power consumption is not to
exceed 440w)

Dimensions (H x W x D): 40.9"(H) x 21.1"(W) x 30.3"(D)

(1040mm x 536mm x 770mm)

Does not include dimension of

Conveyer Tray

It will add 21.1" (536mm) in width

when it is connected to Booklet
Trimmer-C1.

Weight: Approximately 322 lb. (145kg)

*Front cover photo includes the Booklet Trimmer-C1 with the Two-Knife Booklet Trimmer-A1.

CANON and IMAGEPRESS are registered trademarks of Canon Inc. in the United States and may
also be registered trademarks or trademarks in other countries. IMAGEANYWARE is a trademark
of Canon. All other referenced product names and marks are trademarks of their respective
owners and are hereby acknowledged.
Specifications and availability subject to change without notice.
©2008 Canon U.S.A., Inc. All rights reserved.

1008-iPTKT-PDF-IS

printed on recycled
paper in the u.s.a.

1-800-OK-CANON

www.usa.canon.com

Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042