Getting Started
ENGLISH
CEL-SX1XA210
Preparing a Memory Card
Use the following memory cards (sold separately), in any capacity.
SD memory cards*
SDHC memory cards*1*
SDXC memory cards*1*
*1 Cards conforming to SD standards. However, not all memory cards have been verifi ed to work
with the camera.
*2 UHS-I memory cards are also supported.
1
2
2
Manuals and Software
Download camera and lens manuals and software from the following page.
http://www.canon.com/icpd/
With a computer connected to the Internet, access the above URL.
Access the site for your country or region.
Adobe Reader is required to view the manuals.
For instructions on downloading and installing the software, refer to the
for download.
You may be requested to enter the serial number (body
number) when downloading the manuals or software.
In this case, enter the number on the camera body,
behind the screen.
Help Guide
available
2
Preliminary Notes and Legal Information
Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon
Inc., its subsidiaries and affi liates, and its distributors are not liable for any consequential damages arising from any
malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or
to be recorded in a way that is machine readable.
Copyright laws in your country may prohibit the use of your recorded images or copyrighted music and images with
music in the memory card for anything other than private enjoyment. Refrain from unauthorized recording that infringes
on copyright law, and note that even for personal use, photography may contravene copyright or other legal rights at
some performances or exhibitions, or in some commercial settings.
For information on camera warranty or Customer Support, please refer to the warranty information provided with your
camera User Manual Kit.
Although the screen is produced under extremely high-precision manufacturing conditions and more than 99.99% of
the pixels meet design specifi cations, in rare cases some pixels may be defective or may appear as red or black dots.
This does not indicate camera damage or aff ect recorded images.
Safety Precautions
Before using the product, ensure that you read the safety precautions described below. Always ensure that the product
is used correctly.
The safety precautions noted here are intended to prevent you and other persons from being injured or incurring
property damage.
Be sure to also check the guides included with any separately sold accessories you use.
Do not fi re the fl ash near the eyes.
It may hurt the eyes.
Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a child’s neck may result in asphyxiation.
Use only recommended power sources.
Do not disassemble, alter, or apply heat to the product.
Do not peel off the adhesive covering, if the battery pack has it.
Avoid dropping or subjecting the product to severe impacts.
Do not touch the interior of the product if it is broken, such as when dropped.
Stop using the product immediately if it emits smoke or a strange smell, or otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the product.
Avoid contact with liquid, and do not allow liquid or foreign objects inside.
This could result in electrical shock or fi re.
If the product gets wet, or if liquid or foreign objects get inside, remove the battery pack/batteries or unplug immediately.
If your model has a viewfi nder or interchangeable lens, do not look through the viewfi nder or lens at bright
light sources (such as the sun on a clear day, or a bright artifi cial light source).
This may damage your eyesight.
If your model has an interchangeable lens, do not leave the lens (or the camera with the lens attached) in the
sun without the lens cap on.
This could result in a fi re.
Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fi re. Immediately stop using the product and distance yourself from it.
Use only the recommended battery pack/batteries.
Do not place the battery pack/batteries near or in direct fl ame.
This may cause the battery pack/batteries to explode or leak, resulting in electrical shock, fi re, or injuries. If leaking
battery electrolyte comes into contact with eyes, mouth, skin, or clothing, immediately fl ush with water.
If the product uses a battery charger, note the following precautions.
- Remove the plug periodically and, using a dry cloth, wipe away any dust and dirt that has collected on the
plug, the exterior of the power outlet, and the surrounding area.
- Do not insert or remove the plug with wet hands.
- Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring
accessories. Do not use if the plug is damaged or not fully inserted in the outlet.
- Do not allow dust or metal objects (such as pins or keys) to contact the terminals or plug.
- Do not cut, damage, alter, or place heavy items on the power cord, if your product uses one.
This could result in electrical shock or fi re.
Denotes the possibility of serious injury or death.
Warning
3
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other
devices. Exercise adequate caution when using the product in places where use of electronic devices is restricted,
such as inside airplanes and medical facilities.
Do not allow the camera to maintain contact with skin for extended periods.
Even if the camera does not feel hot, this may cause low-temperature burns, manifested in redness of the skin or
blistering. Use a tripod in hot places, or if you have poor circulation or insensitive skin.
When carrying the product by the strap, be careful not to bang it, subject it to strong impacts or shocks, or let
it get caught on other objects.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
When using the fl ash, be careful not to cover it with your fi ngers or clothing.
This could result in burns or damage to the fl ash.
Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery pack/batteries, resulting in electrical shock, fi re,
burns, or other injuries.
Overheating and damage may result in electrical shock, fi re, burns, or other injuries.
The slideshow transition eff ects may cause discomfort when viewed for prolonged periods.
When using optional lenses, lens fi lters, or fi lter adapters (if applicable), be sure to attach these accessories
fi rmly.
If the lens accessory becomes loose and falls off , it may crack, and the shards of glass may lead to cuts.
On products that raise and lower the fl ash automatically, make sure to avoid pinching your fi ngers with the
lowering fl ash.
This could result in injury.
Caution
Do not aim the camera at intense light sources, such as the sun on a clear day or an intense artifi cial
light source.
Doing so may damage the image sensor or other internal components.
When using the camera on a sandy beach or at a windy location, be careful not to allow dust or sand to enter
the camera.
On products that raise and lower the fl ash automatically, do not push the fl ash down or pry it open.
This may cause the product to malfunction.
Wipe off any dust, grime, or other foreign matter on the fl ash with a cotton swab or cloth.
The heat emitted from the fl ash may cause foreign matter to smoke or the product to malfunction.
Remove and store the battery pack/batteries when you are not using the product.
Any battery leakage that occurs may cause product damage.
Before you discard the battery pack/batteries, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fi re or explosions.
Unplug any battery charger used with the product when not in use. Do not cover with a cloth or other objects
when in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fi re.
Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion, resulting in product damage or fi re.
If your product uses multiple batteries, do not use batteries that have diff erent levels of charge together,
and do not use old and new batteries together.
Do not insert the batteries with the + and – terminals reversed.
This may cause the product to malfunction.
Denotes the possibility of injury.
Caution
Denotes the possibility of property damage.
4
Getting Ready
1
Attach the strap
(1)
(2)
(3)
5
Open the battery
cover
2
Insert the battery
pack
(4)
6
Insert the battery
pack
(2)
(1)
(1)
(2)
(1)
3
Charge the battery
pack
(2)
(3)
Charging: Orange
Fully charged: Green
Getting Ready
7
Close the battery
cover
Terminals
4
Remove the
battery pack
(1)
(2)
8
Open the memory
card cover
(1)
(2)
5
Getting Ready
9
Insert the memory
card
Label
13
Set your home time
zone
/ buttons to adjust
button
→
10
Close the memory
card cover
Getting Ready
14
Set the display
language
11
Turn the camera
on
Hold down the
button and press the
button.
12
Set the date and
time
/ buttons to
navigate →
buttons to adjust →
/ / / buttons
to adjust →
button
/
button
6
Adjusting the Date and Time
1
Access the menu
screen
1
Make sure the
camera is off
2
Choose the setting
item
(1)
(2)
[ 2] → [Date/Time]
→
button
Attaching a Lens
2
Remove the lens
cap and body cap
3
Set up the camera
/ buttons to
navigate →
buttons to adjust →
/
button
3
Attach the lens
(1)
(2)
4
Remove the front
lens cap
(1)
(2)
(1)
7
5
Prepare to shoot
(2)
Attaching a Lens
(1)
Press (1) as you turn
(2) slightly, and then
release (1).
Turn (2) a little more
until it clicks.
1
Make sure the
camera is off
Zoom in or out before
focusing.
Detaching a Lens
2
Detach the lens
(3)
(2)
(1)
Press (1) as you turn
the lens toward (2)
until it stops.
Remove it in the
direction shown (3).
3
Attach the lens
cap and body cap
8
Shooting
Shooting Stills (Scene Intelligent Auto)
1
Turn the camera
on
4
Focus
Press the shutter
button lightly.
The camera beeps
twice after focusing.
2
Set the mode
(1) (2) (3)
(1) Scene icon
(2) Remaining
number of shots
(3) Remaining record-
ing time
Shooting
Shooting Stills (Scene Intelligent Auto)
5
Raise the fl ash as
needed
An AF frame is
displayed around
positions in focus.
If [Raise the fl ash] is
displayed, move the
switch.
3
Zoom in or out, as
needed
6
Shoot
9
Shooting
Recording Movies (Scene Intelligent Auto)
1
Turn the camera
on
4
Start recording
2
Set the mode
(1) (2) (3)
(1) Scene icon
(2) Remaining
number of shots
(3) Remaining record-
ing time
Shooting
Recording Movies (Scene Intelligent Auto)
5
Stop recording
Frames are displayed
around any detected
faces that are in
focus.
3
Zoom in or out, as
needed
10
Playback
Viewing Stills
1
Enter Playback
mode
1
Enter Playback
mode
2
Browse your
images
button: Previous
image
button: Next image
2
Browse your
images
button: Previous
image
button: Next image
Playback
Viewing Movies
Movies are labeled
with [
3
Play the movie
].
11
/ buttons →
] → button
[
Playback
Viewing Movies
4
Adjust the volume
Erasing Images
1
Enter Playback
mode
2
Browse your
images
button: Previous
image
button: Next image
3
Erase
/ buttons →
[Erase] →
12
button
Trademarks and Licensing
● The SDXC logo is a trademark of SD-3C, LLC.
Disclaimer
● Unauthorized reproduction of this guide is prohibited.
● All measurements based on Canon testing standards.
● Information subject to change without notice, as are product
specifi cations and appearance.
● Illustrations and screenshots in this guide may diff er slightly from
the actual equipment.
● The above items notwithstanding, Canon cannot be held liable for
any loss arising from the use of this product.
13
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed
of with your household waste, according to the WEEE Directive
(2012/19/EU), the Battery Directive (2006/66/EC) and/or
national legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown
above, in accordance with the Battery Directive, this indicates
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)
above an applicable threshold specifi ed in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (EEE) and batteries
and accumulators. Improper handling of this type of waste could have a possible impact
on the environment and human health due to potentially hazardous substances that are
generally associated with EEE. Your cooperation in the correct disposal of this product
will contribute to the eff ective usage of natural resources.
For more information about the recycling of this product, please contact your local city
offi ce, waste authority, approved scheme or your household waste disposal service or
visit www.canon-europe.com/weee, or www.canon-europe.com/battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
To ensure proper operation of this product, use of genuine Canon accessories is
recommended.
- Interface Cable IFC-400PCU
- Interface Cable IFC-200U
- Interface Cable IFC-500U
HDMI cable (camera end: Type D): Use a commercially available cable no longer than 2.5 m.
is present in this battery or accumulator at a concentration
14
The model number is PC2276 (including WLAN module model ES200 and BLE module
model WM500). To identify your model, check the label on the bottom of the camera or
behind the tilt-up screen for a number beginning with PC.
Countries and Regions Permitting Wireless Function Use
- Use of wireless function is restricted in some countries and regions, and illegal use may
be punishable under national or local regulations. To avoid violating wireless regulations,
visit the Canon website to check where use is allowed.
Note that Canon cannot be held liable for any problems arising from wireless function use
in other countries and regions.
Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certifi cation labels from the product
Do not use the wireless function of this product near medical equipment or other
electronic equipment.
Use of the wireless function near medical equipment or other electronic equipment may
aff ect operation of those devices.
Hereby, Canon Inc. declares that this equipment is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.canon-europe.com/ce-documentation
Wi-Fi Frequency range: 2401MHz - 2473MHz
Wi-Fi Maximum output power: 13.64dBm
Bluetooth Frequency range: 2402MHz - 2480MHz
Bluetooth Maximum output power: 7.14dBm
CANON EUROP
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Graphical symbols placed on the equipment
A
N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
Class II equipment
Direct current
Some logos for technical standards the camera has met can be viewed on the
screen by choosing MENU ► [
4] tab ► [Certifi cation Logo Display].
© CANON INC. 2017
15
Loading...