The “Quick Reference Guide” is included at the end of this manual.
E
INSTRUCTION
MANUAL
Introduction
COPY
The EOS REBEL SL1/EOS 100D is a high-performance, digital singlelens reflex camera featuring a fine-detail CMOS sensor with approx.
18.0 effective megapixels, DIGIC 5, high-precision and high-speed 9point AF, approx. 4 fps continuous shooting, Live View shooting, and
Full High-Definition (Full HD) movie shooting.
The camera is highly responsive to any shooting situation, and provides
many features for demanding shots.
Refer to This Manual while Using the Camera to Further
Familiarize Yourself with the Camera
With a digital camera, you can immediately view the image you have
captured. While reading this manual, take a few test shots and see how
they come out. You can then better understand the camera.
To avoid botched pictures and accidents, first read the “Safety
Warnings” (p.353-355) and “Handling Precautions” (p.20, 21).
Testing the Camera Before Use and Liability
After shooting, play images back and check whether they have been
properly recorded. If the camera or memory card is faulty and the
images cannot be recorded or downloaded to a computer, Canon
cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images or copyrighted music and images with music in the memory
card for anything other than private enjoyment. Also be aware that
certain public performances, exhibitions, etc., may prohibit photography
even for private enjoyment.
2
Compatible Cards
COPY
The camera can use the following cards regardless of capacity:
• SD memory cards
• SDHC memory cards*
• SDXC memory cards*
* UHS-I cards supported.
Cards that Can Record Movies
When shooting movies, use a large-capacity SD card rated SD
Speed Class 6 “” or higher.
If you use a slow-writing card when shooting movies, the movie may
not be recorded properly. Also, if you play back a movie on a card
with a slow reading speed, the movie may not play back properly.
If you want to shoot still photos while shooting a movie, you will need
an even faster card.
To check the card’s reading/writing speed, refer to the card
manufacturer’s Web site.
In this manual, “card” refers to SD memory cards, SDHC memory
cards, and SDXC memory cards.
* The camera does not come with a card for recording images/
movies. Please purchase it separately.
3
Item Check List
COPY
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Battery Pack
Camera
(with eyecup and body cap)
Wide Strap
EW-300D
* Battery Charger LC-E12 or LC-E12E is provided. (The LC-E12E comes with a
power cord.)
The Instruction Manuals and CD-ROMs provided are listed on the next page.If you purchased a Lens Kit, check that the lenses are included.Depending on the Lens Kit type, lens instruction manuals may also be
included.
Be careful not to lose any of the above items.
LP-E12
(with protective cover)
Interface Cable
Battery Charger
LC-E12/LC-E12E*
4
Instruction Manual and CD-ROMs
COPY
The instruction manual consists of a booklet and PDF manuals in
electronic form (provided in the CD-ROM disc).
Camera Basic
Instruction Manual
Camera Instruction Manual CD-ROM
Contains the following manuals in PDF:
• Camera Instruction Manual (Detailed version)
• Quick Reference Guide
Software Instruction Manual CD-ROM
Contains instruction manuals in PDF for the software in the
Software CD-ROM.
* Instructions for viewing the Instruction Manual CD-ROMs are on pages 362-363.
Software CD-ROM (EOS DIGITAL Solution Disk)
Contains various software. For outlines and installation
procedure of the software, see pages 366-368.
5
Quick Start Guide
COPY
1
2
Insert the battery (p.32).
To charge the battery, see page 30.
Insert a card (p.32).
With the card’s label facing toward
the back of the camera, insert it into
the card slot.
White indexRed index
3
4
5
6
Attach the lens (p.40).
Align the lens’ white or red index
with the camera’s index in the
matching color.
Set the lens focus mode switch
to <AF>
Set the power switch to <1>
(p.35).
When the LCD monitor displays the
(p.40).
date/time/zone setting screens, see
page 37.
6
COPY
7
8
9
Set the Mode Dial to <A>
(Scene Intelligent Auto)
All the necessary camera settings
will be set automatically.
Focus the subject (p.43).
Look through the viewfinder and
aim the viewfinder center over the
subject.
Press the shutter button halfway,
and the camera will focus the
subject.
If necessary, the built-in flash will be
raised automatically.
Take the picture (p.43).
Press the shutter button completely
to take the picture.
Review the picture (p.217).
The captured image will be displayed
for 2 sec. on the LCD monitor.
To display the image again, press
the <x> button (p.89).
Quick Start Guide
(p.58).
To shoot while looking at the LCD monitor, see “Live View
Shooting” (p.149).
To view the images captured so far, see “Image Playback” (p.89).To delete an image, see “Erasing Images” (p.268).
7
Conventions Used in this Manual
COPY
Icons in this Manual
<6>: Indicates the Main Dial.
<W><X><Y><Z>: Indicates the <S> cross keys.
<0>: Indicates the Setting button.
0, 9, 7, 8: Indicates that the corresponding function
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
3: Indicates a function that can be changed by pressing the
<M> button and changing the setting.
M: When shown on the upper right of a page, it indicates that
(p.**): Reference page numbers for more information.
Basic Assumptions
All operations explained in this manual assume that the power switch
is <1> (p.35).
It is assumed that all the menu settings and Custom Functions are
set to their defaults.
The illustrations in this manual show the camera attached with the
EF-S18-55mm f/3.5-5.6 IS II lens as an example.
the function is available only in the Creative Zone modes
(p.26).
: Warning to prevent shooting problems.
: Supplemental information.
: Tips or advice for better shooting.
: Problem-solving advice.
remains active for 4 sec., 6 sec., 10 sec., or
16 sec. respectively after you let go of the
button.
8
Chapters
1
456
1
11
1
1314
COPY
For first-time DSLR users, Chapters 1 and 2 explain the camera’s
basic operations and shooting procedures.
Introduction
Getting Started
Basic Shooting and Image Playback
2
Creative Shooting
3
Advanced Shooting
Shooting with the LCD Monitor
Shooting Movies
Handy Features
7
Image Playback
8
Post-Processing Images
9
Printing Images
0
Customizing the Camera
Reference
2
Viewing the CD-ROM Instruction Manuals /
Downloading Images to Your Computer
Quick Reference Guide and Index
(Live View Shooting)
2
29
57
91
113
149
181
215
241
273
281
297
307
361
369
9
Contents at a Glance
COPY
Shooting
Shoot automaticallyÎ p.57-79 (Basic Zone modes)
Shoot continuouslyÎ p.108 (i Continuous shooting)
Take a picture of yourself in a group
Freeze the actionÎp.114 (s Shutter-priority AE)Blur the action
Blur the background Îp.64 (C Creative Auto)
Keep the background in sharp focus
Adjust the image brightness (exposure)
Shoot in low lightÎp.58, 111 (D Flash photography)
Shoot without flashÎp.63 (7 Flash Off)
Shoot fireworks at nightÎp.120 (Bulb exposure)
Shoot while viewing the LCD monitor
Using Creative FiltersÎp.157 (Creative filters)
Shoot moviesÎp.181 (k Movie shooting)
Image Quality
Shoot with image effects matching the subject
Make a large-size print of the pictureÎp.94 (73, 83, 1)
Îp.110 (j Self-timer)
Îp.116 (f Aperture-priority AE)
Îp.123 (Exposure compensation)
p.98 (ISO speed setting)
p.80 (b Flash off)
Îp.149 (A Live View shooting)
Îp.101 (Picture Style)
10
Take many picturesÎp.94 (7a, 8a, b, c)
COPY
Focusing
Change the point of focusÎp.105 (S AF point selection)
Shoot a moving subjectÎp.71, 104 (AI Servo AF)
Playback
View the images on the camera Îp.89 (x Playback)
Search for pictures quicklyÎp.242 (H Index display)
Rate imagesÎp.248 (Ratings)
Prevent important imagesÎp.266 (K Image protect)
from accidental deletion
Delete unnecessary imagesÎp.268 (L Delete)
Auto play images and moviesÎp.258 (Slide show)
View the photos or movies on a TV set
Adjust the LCD monitor brightness
Apply special effect to imagesÎp.274
Printing
Print pictures easilyÎp.281 (Direct printing)
p.243 (I Image browsing)
Îp.262 (Video OUT)
Îp.218 (LCD monitor brightness)
(Creative filters
)
11
Index to Features
COPY
Power
Battery
• ChargingÎ p.30
• Installing/RemovingÎ p.32
• Battery checkÎ p.36
Household power outlet Î p.308Auto power offÎ p.35
Index .............................................................................................382
19
Handling Precautions
COPY
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult the nearest Canon
Service Center. Wipe off any water droplets with a dry and clean cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves, such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat, such as in a car in direct
sunlight. High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Do not block the mirror operation with your finger, etc. Doing so may cause a
malfunction.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean
the camera body or lens. For stubborn dirt, take the camera to the nearest
Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to prevent
the contacts from corroding. Corroded contacts can cause camera misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until condensation has evaporated before
using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are chemicals that result in rust and
corrosion such as in a chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot such as a foreign trip coming up, have the camera
checked by your Canon dealer or check the camera yourself and make sure
it is working properly.
20
Handling Precautions
COPY
LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there may be a few dead pixels
displaying only black or red, etc. among the remaining 0.01% or less pixels.
Dead pixels are not a malfunction. They do not affect the images recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
The LCD monitor display may seem slow in low temperatures, or look black
in high temperatures. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not touch the card’s electronic contacts with your fingers or anything
metallic.
Do not affix any stickers, etc., on the card.Do not store or use the card near anything having a strong magnetic field,
such as a TV set, speakers, or magnet. Also avoid places prone to having
static electricity.
Do not leave the card in direct sunlight or near a heat source.Store the card in a case.Do not store the card in hot, dusty, or humid locations.
Lens
After detaching the lens from the camera, put down the lens
with the rear end up and attach the lens caps to avoid
scratching the lens surface and electrical contacts.
Contacts
Cautions regarding Prolonged Use
If you use continuous shooting, Live View shooting, or
movie shooting for a prolonged period, the camera may
become hot. This is not a malfunction.
Smudges Adhering to the Front of the Sensor
Besides dust entering the camera from outside, in rare cases lubricant from the
camera’s internal parts may adhere to the front of the sensor. If visible spots still
remain after the automatic sensor cleaning, having the sensor cleaned by a
Canon Service Center is recommended.
21
Nomenclature
COPY
Built-in flash/AF-assist beam
(p.111/106)
Mode Dial (p.26)
Power switch (p.35)
<i> ISO speed
setting button (p.98)
<6> Main Dial
Shutter button
(p.43)
Remote control
sensor
(p.147, 309)
Grip
Mirror (p.147, 239)
Body cap (p.40)
Contacts (p.21)
Lens mount
Lens lock pin
<Y> External microphone
IN terminal (p.210)
<F> Remote control terminal
(p.310)
<q/C>
Audio/video OUT/
Digital terminal (p.265, 282, 364)
C : Kids (p.73)
P : Food (p.74)
x : Candlelight (p.75)
6 : Night Portrait (p.76)
F : Handheld Night Scene (p.77)
G : HDR Backlight Control (p.78)
26
Nomenclature
COPY
Battery Charger LC-E12
Charger for Battery Pack LP-E12 (p.30).
Power plug
Charge lamp
Battery pack slot
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet, if needed.
Full-charge lamp
Battery Charger LC-E12E
Charger for Battery Pack LP-E12 (p.30).
Battery pack slot
Full-charge lamp
Charge lamp
Power cord
Power cord socket
27
COPY
Getting Started
COPY
This chapter explains preparatory steps before you start
shooting and basic camera operations.
Attaching the Strap
Pass the end of the strap through
the camera’s strap mount eyelet
from the bottom. Then pass it
through the strap’s buckle as shown
in the illustration. Pull the strap to
take up any slack and make sure
the strap will not loosen from the
buckle.
The eyepiece cover is also
attached to the strap (p.310).
Eyepiece cover
29
Charging the Battery
COPY
Remove the protective cover.
1
Attach the battery.
2
As shown in the illustration, attach the
To detach the battery, follow the
battery securely to the charger.
above procedure in reverse.
LC-E12
LC-E12E
It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (5
°
F - 50°F) will take longer (up to approx. 4 hours).
41
30
Recharge the battery.
3
For LC-E12
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E12E
Connect the power cord to the
charger and insert the plug into a
power outlet.
X Recharging starts automatically and
the charge lamp lights up in orange.
X When the battery is fully recharged,
the full-charge lamp will light up in
green.
°
C - 10°C /
Loading...
+ 358 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.