Canon 4350B001 User Manual

Please read me first [Important]

COPY

About the SELPHY CP800 Printer User Guide

Due to different firmware versions, there are two types (two versions) of the user guide

for the SELPHY CP800. Please check the serial number on the bottom of the printer

and click the right version for your printer.

1. How to tell which version you need based on the serial number

Bottom of printer

1) The sixth digit from the right is 0 or 1  First version

2) The sixth digit from the right is 2 or greater  Second version

There are also cases where the printer's firmware may have been updated to the second

version if the printer has been brought in for repairs. In such cases, a comment about

the update to the second version of the firmware appears on the repair order, and the

user guide for the second version (or an excerpt of the things that have changed) is

Sixth digit from the right

included with the repaired product.

2. The differences in the firmware versions

1) First version:

The settings for the printing layout (for printing multiple images on a single sheet, see

page 19 in the user guide) are saved even when the printer's power is turned off. This

can be convenient you intend to print with the same layout the next time the printer is

used, but if that is not the case, it can result in prints in an unexpected layout.

2) Second version:

The settings for the printing layout are reset to the 1-up setting (for printing one image

on a full sheet) when the printer's power is turned off. To save the settings for the

printing layout even after the printer's power has been turned off, you can change the

settings to be the same as they are in the first version using the operation buttons (see

page 19 of the user guide for the second version of the firmware).

Printer User Guide

COPY

ENGLISH

Make sure you read this guide, including the “Safety



Precautions” section, before using the printer.



Store this guide safely so that you can use it in the future.

Package Contents

COPY

Check if the following items are included in your printer package, using the □ check boxes. If anything is missing, contact the retailer where you purchased the printer.

SELPHY Printer Unit

□

Compact Power Adapter

□

CA-CP200 W

Power Cord

□

Paper Cassette (Postcard Size)

□

* Card size paper cassette may not be included depending on the region.

PCP-CP300

Printer User Guide (This Guide)

Paper Cassette (Card Size)*

□

PCC-CP300

Support Guide

□

COMPACT PHOTO

PRINTER Solution Disk

Warranty Card

□

Ink and Paper (Sold Separately)

Before using the printer, be sure to purchase a Color Ink Cassette/Paper Set separately.

Color Ink Cassette/Paper Set

Product Name Paper Size

Color Ink Cassette/Paper Set KP-36IP (Postcard)

Color Ink Cassette/Paper Set KP-72IN (Photo Paper)

Color Ink Cassette/Paper Set KP-108IN (Photo Paper)

Color Ink Cassette/Paper Set KC-36IP

Color Ink Cassette/Label Set KC-18IF (Full-page labels)

Color Ink Cassette/Label Set KC-18IL (8-label sheets)

Some accessories may not be available depending on the region.

Postcard Size

Card Size

Number of

Possible Prints

108

Necessary Paper Cassette

Paper Cassette PCP-CP300

(Included with SELPHY)

Cassette PCC-CP300

Paper

CD-ROM:

Read This First

COPY

Warning Against Copyright Infringement

The images printed with this product should be intended for personal use. Do not print images that infringe upon copyright laws without the prior permission of the copyright holder.

Warranty Limitations

This product’s warranty is only effective in the country of sale. If there is a problem with the printer while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon

Customer Support Help Desk.

LCD Monitor (Screen)



The LCD monitor is produced with extremely high-precision manufacturing techniques. More than

99.99% of the pixels operate to specication. However, some pixels may occasionally misre or appear as red or black dots. This has no effect on the printed image and does not constitute a

malfunction.



The LCD monitor may be covered with a thin plastic lm for protection against scratches during shipment. If so, remove the lm before using the printer.

Conventions Used in this Guide



This printer will be referred to as “SELPHY” or “printer”.



The various types of memory cards that can be used in this printer are collectively referred to as “memory

cards”.



Icons are used in the text to represent SELPHY’s buttons. For details, refer to “Controls”

(p. 6).



Language that displays on the screen appears inside [ ] (square brackets).



: Things you should be careful about



: Supplemental information



(p. XX) : Reference pages (“XX” stands for a page number)



guide assumes all functions are at their default settings.

This

Table of Contents

Package Contents ________________________ 2

Ink and Paper (Sold Separately) _____________ 2

Read This

Conventions Used in this Guide _____________ 3

Safety Precautions _______________________ 4

Setting Up SELPHY _______________________ 5

Components Guide _______________________ 6

Information Displayed on the Screen _________ 7

Getting Started __________________________ 8

Setting the Display Language _______________ 11

Compatible Memory Cards and

Memory

Images That

Selecting and Printing Images _______________13

Printing All

First __________________________ 3

Card Slots _______________________12

Can Be Printed ________________12

Images ________________________15

Storing the Printed Photos _________________16

Cleaning Up After

Printing a Variety of Images _________________17

Printing From Your Computer ______________ 22

Installing and Starting the Software __________ 23

Using the Software to Print ________________ 25

Printing From Your Digital Camera __________ 27

Printing Images Using Digital Camera Specied

Settings (DPOF Print) ____________________ 28

Using the Battery Pack ___________________ 29

Printing From Your Mobile Phone ___________ 30

Troubleshooting __________________________31

Specications __________________________ 33

Handling Precautions ____________________ 34

Printing __________________16

Safety Precautions

COPY



Before using the product, please ensure that you read the safety precautions described below. Always

ensure that the product is used correctly.



The safety precautions noted on the following pages are intended to prevent injuries to yourself and other

or damage to the equipment.

persons,



Be sure to also check the guides included with any separately sold accessories you use.

Warning



Store this equipment out of the reach of children and infants.

Mistakenly putting the power cord around a child’s neck could result in asphyxiation.



Use only recommended power sources.



Do not attempt to disassemble, alter or apply heat to the product.



Avoid dropping or subjecting the product to severe impacts.



To avoid the risk of injury, do not touch the interior of the printer if it has been dropped or otherwise damaged.



Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves abnormally.



Do not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.



Do not let the product come into contact with water (e.g. sea water) or other liquids.



Do not allow liquids or foreign objects to enter the printer.

This could result in electrical shock or re. If liquid comes into contact with the product, unplug it from the outlet and consult your retailer or a Canon

Customer



This could result in electrical shock or re. Immediately stop using the equipment and distance yourself from it.



 

This could result in electrical shock or re.



Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD

player.

Support Help Desk.

Do not touch this printer or the power plug during thunderstorms.

Unplug the power cord periodically and wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area with a dry cloth.

Do not handle the power cord with wet hands. Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or

wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.

Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug. Do not cut, damage, alter or place heavy items on the power cord.

Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.

Denotes the possibility of serious injury or death.

Caution



Do not stick any part of your hand into the printer interior.



Be sure to place SELPHY safely so as to avoid tripping over the power cord.

This could lead to injury or damage the printer.



Avoid using, placing or storing the printer in the following places.



Places subject to strong sunlight.  Places subject to temperatures above 40 °C (104 °F).



Humid or dusty areas.

These could result in electrical shock, burns, re or other injuries.

High

temperatures may cause deformation of the adapter or printer casing.

Denotes the possibility of injury.



Places subject to strong vibrations.

Caution

COPY



Unplug the product from the power outlet when you are not using it.



Do not place anything, such as cloth, on top of the printer while in use.

Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting in re.

Denotes the possibility of damage to the equipment.

Setting Up SELPHY

Place SELPHY on a stable and even surface, such as a

More than the length of the paper

10 cm (4 in.) or

10 cm (4 in.)



table. Never place it on an unstable or tilted surface. Keep SELPHY at least 1 m (3 ft.) from devices emitting



electromagnetic waves or strong magnetic elds. Make sure there is at least 10 cm (4 in.) of free space



around SELPHY. Since paper will pass in and out of SELPHY during



printing, make sure the space behind the printer is greater

than the length of the paper.



Never place SELPHY close to motors or other devices that generate strong electromagnetic elds.This

may damage the printer or cause it to malfunction.



Do not place near a television or radio. This may cause the printer to malfunction.

Components Guide

COPY

Card Slots (p. 12)

Paper Cassette Compartment (p. 10)

Paper Cassette Compartment Cover (p. 10)

USB Terminal for Digital Camera/

USB Flash Memory Connection

(pp. 14, 27, 30)

Battery/Battery Cover

Lock (p. 29)

Battery Cover (p. 29)

(Air vents are behind the battery cover (p. 34))

Paper Ejection Slot

Security cables, such as a Kensington lock, can be attached to this slot.

Controls



Ink Cassette Lock (p. 14)

Ink Cassette Compartment (p. 10) Ink Cassette Compartment Cover

(p. 10)

USB Terminal for Computer Connection (p. 24)

DC IN (Power Input) Terminal

(p. 10)

Security Slot*

Icons Used in This

Guide

    



   

— Screen (LCD Monitor) Displays images, settings screens, or error messages (p. 32).

  







 

Name Function

Power Button Turns SELPHY on or off (p. 11).

Menu Button Displays the menu screen (p. 11).

OK Button Sets

Up/+ Copies Button

Down/– Copies Button

Left Button

Right Button

Back Button Restores the previous screen (p. 7), cancels printing (p. 14).

Print Button Starts printing (p. 14).

the selected item.

Species number of copies, selects items to set.

Switches images, changes settings.

Information Displayed on the Screen

COPY

Memory card slot (p. 12) currently

in use (An SD card is used in this example)

orientation

Paper

settings

(Settings that are not available are grayed out)

File number

ink cassette type

Installed

(Postcard size is used in this example)

Number of copies for the displayed image

Hiding Information Displayed on the Screen

You can hide the information displayed on the screen and view images at a larger size.

Total number of images to be printed

(pp. 18 – 21)

Display the settings screen.

Follow Steps 1 – 3 on p. 11.



Make the setting.

Press the ud buttons to select [Info Display].



Press the l r buttons to select [Off], then press the v



button to complete the setting.

Pressing the v button again will restore the image



display screen.

The image will display full screen, and a frame that



indicates the printing area will appear.

Getting Started

COPY

Preparations for printing images. A Postcard size Color Ink Cassette/Paper Set (sold separately) (p. 2) will be used as an example, however Color Ink Cassette/Paper Sets other than Postcard size may also be used in the same way to prepare for printing.

Preparing the Ink Cassette

Check the ink cassette.

Check that the paper size and the size shown on the color



ink cassette (Card size, Postcard size etc.) match. Check that the ink sheet is taut with no slack. If the ink



sheet is slack, push and turn the sprocket as shown in the

illustration.

If you overwind the ink sheet, it may not be possible to



use all the paper for printing and the ink sheet may tear.

Ink sheet

Do not touch or pull on the ink sheet. Do not touch the ink cassette with wet or sweaty hands. You may not be able to print if the ink sheet is damaged, dirty or wet.

Preparing the Paper Cassette

Check the paper size.

Check that the prepared ink cassette and the size shown



on the paper cassette (Card size, Postcard size, etc.)

match.

Open the lid.

There are two steps to open the lid. Open the outer lid ()



rst, then open the inner lid ().

COPY

Shiny side

Set the paper.

Set the paper into the paper cassette that you prepared.



You can place up to 18 sheets in the paper cassette.



Inserting 19 or more sheets may damage the printer or

cause malfunction.

Hold the paper as shown in the illustration, with the shiny



side facing up and put it into the paper cassette. Do not

touch the print side (shiny side) of the paper with your ngers. This may prevent you from making clean prints. If a protective sheet is included with the paper, remove it



and

set the paper only into the cassette.

When making Postcard size prints that have a section



for pasting a stamp, insert the paper so that the stamp

section is facing the direction shown in the illustration.



Use only dedicated paper for use in SELPHY CP series printers included in the genuine Canon brand Color Ink Cassette/Paper Sets. Regular printing paper, regular postcards, or dedicated paper for SELPHY ES series printers cannot be used.



Never do the following, as it may result in failure or cause the printer to malfunction:

reverse the paper (the shiny side is the print side)

bend or separate the paper at the perforations before printing

use label sheets that have begun to peel or label sheets with portions peeled back

write on a sheet before printing

on already printed paper

reuse a spent ink cassette



Do not touch the springs of the paper cassette.

If the springs are bent or deformed, paper will not feed correctly into SELPHY.



Do not touch or scratch the print surface (shiny side), or touch the paper with wet hands. If the print surface becomes dirty or wet, you will not be able to make clean prints.

Close the inner lid until it clicks into place.



Leave the outer lid open during printing.

Close the lid.

Spring

Inserting the Ink and Paper Cassettes

COPY

Connecting SELPHY

Open the covers.

Open the covers for the ink cassette and paper cassette



compartments.

Insert the ink cassette.

Insert the ink cassette into the printer in the direction



indicated by the arrow on the cassette until it clicks and

locks into place. Close the ink cassette compartment cover.



Insert the paper cassette.

Make sure that the outer lid is open (p. 8) and insert the



paper cassette all the way into the compartment.

Plug the adapter cord into SELPHY.

Fully insert the adapter plug into SELPHY.



Connect the power cord.

Connect the power cord to the compact power adapter,



then plug the other end into a power outlet.

Setting the Display Language

COPY

You can change the language displayed in the LCD monitor menus and messages.

Turn on SELPHY.

Press and hold the q button until the screen shown at



the left displays.

To turn the power off, press and hold the q button again



until the displayed screen changes or turns off.

Adjust the screen for ease of viewing.

Raise the LCD monitor and adjust until the screen is



easily visible. Do not raise the LCD monitor more than 45° as this may



result in damage or malfunction.

Approx. 45°

Display the settings screen.

Press the k button.



Press the ud buttons to select [Printer Setup], then



press the o button.

Display the language settings screen.

Press the ud buttons to select [Language].



Press the o button.



Select a language.

Press the



press the o button. Pressing the v button twice will restore the screen in



Step 1.

udl r

buttons to select a language, then

Compatible Memory Cards and Memory Card Slots

SD/ MMC

CF/ micr odri v e

MS/ MS D uo

COPY

  

Card Slots







“RS-MMC” is an abbreviation of “Reduced-Size MultiMediaCard”.

Purchase the CompactFlash Card Adapter for xD-Picture Card.



For memory cards that require an adapter, be sure to rst insert the memory card into the adapter before

inserting into the appropriate card slot.

If you insert the memory card into a card slot without using an adapter, you may not be able to remove

memory card from the printer.

the



Use a memory card formatted in the device used for taking the images. A memory card formatted on a

computer may not be recognized.

Memory Cards That Can be

Used Without an Adapter



SD Memory Card



SDHC Memory Card



SDXC Memory Card



MultiMediaCard



MMCplus



 

   

Card

HC MMCplus Card

CF (CompactFlash) Card

Microdrive

Memory Stick Memory Stick PRO Memory Stick Duo Memory Stick PRO Duo

Memory Cards That Require an Adapter

(commercially available)



miniSD Memory Card



miniSDHC Memory Card



microSD Memory Card



microSDHC Memory Card



microSDXC Memory Card



RS-MMC Card *



MMCmobile Card



MMCmicro Card



xD-Picture Card



Memory Stick micro

Refer to the user guide included with your memory card and adapter for handling instructions.

About USB Flash Memory

You can print images on a commercially available USB ash memory by connecting it to SELPHY (p. 14).

Images That Can Be Printed

JPEG images conforming to the Exif standard can be printed with SELPHY.

Irregularly sized images, or images that have been edited on a computer may not display or print properly.

Selecting and Printing Images

COPY

You can select an image and specify the number of copies for printing. In this section, an SD memory card will be used as an example, but you can print from other memory cards using the same steps.

Label side

Turn on SELPHY.

Press and hold the q button until the screen shown at



the left displays.

To turn the power off, press and hold the q button again



until the displayed screen changes or turns off.

Adjust the screen for ease of viewing.

Raise the LCD monitor and adjust until the screen is



easily visible. Do not raise the LCD monitor more than 45° as this may



result in damage or malfunction.

Approx. 45°

Insert a single memory card into the slot.

Insert a memory card fully into the appropriate slot.



The screen in Step 4 below (image display screen) (p. 7)



will display.

Select an image.

Press the



If you press and hold one of the l r buttons, the display



jumps by 5 images.

buttons to select an image to print.

l r

Number of copies

for the displayed image

Total number of images to be

printed

Select the number of copies.

Press the ud buttons to select the number of copies.



If you press and hold one of the ud buttons, the number



increases or decreases by 5 copies. You can select up to 99 copies per image.



To print another image, repeat Steps 4 and 5.



COPY

Print.

Press the



During printing, the paper will pass in and out from the



back of SELPHY several times. Do not touch the paper until printing has nished and the printed sheets collect on the print output tray (on the outer lid of the paper cassette). Do not let 19 or more printed sheets collect on the print



output To cancel printing, press the v button.



button to start printing.

tray.

Insert the paper.

When the paper is depleted, remove the paper cassette



from SELPHY. Rell the paper cassette with new paper (p. 8), and



reinsert the cassette into SELPHY (p. 10).

Never pull out the paper cassette, open the ink cassette compartment cover, or remove the memory card

while you can hear the printer’s operation sounds immediately after turning on the printer, or during printing.

may cause the printer to malfunction.

This



It may take some time before images display if the memory card contains a large number of images.



When the total number of copies for printing is set to 0 and you press the p button, the currently displayed image will print once.



If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specied Settings (DPOF Print)” (p. 28).

When the color ink is depleted, open the ink cassette



compartment cover and move the lock as shown in the illustration. The ink cassette will be ejected. Insert a new ink cassette (pp. 8, 10).



Printing From USB Flash Memory

Just like images on memory cards, images on commercially available USB ash memory can also be printed.

Insert a USB ash memory.

Insert a USB ash memory as shown.



All further steps are the same as those used for printing



images from memory cards (pp. 13 – 14).

Change the ink cassette.



Depending on the brand of USB ash memory used, it may be difcult to insert or remove, and it may not

operate properly.



Refer to the user guide included with your USB ash memory for operating instructions.

Printing All Images

COPY

You can print all images on a memory card at once.

Display the menu.

Press the k button.



Display the settings screen.

Press the ud buttons to select [Print All Images], then



press the

Select the number of copies.

Press the ud buttons to set the number of copies.



You can select up to 99 copies per image. If there are



more than 1000 images on the card, only 999 copies will be printed in order of the most recent by shooting date.

button.

Number of sheets

required

Number of copies

Print.

Press the



To cancel printing, press the v button.



button to start printing.

Storing the Printed Photos

COPY



When both edges of a print have perforations, you can remove the edges by bending them.



Use an oil-based pen to write on prints.



To prevent discoloration, do not store prints in places subject to temperatures of over 40 °C (104 °F), humid or dusty places, or in direct

sunlight.



Avoid the following actions as they may result in color change, color fading or color bleeding: Sticking any type of adhesive tape on a print surface, allowing print surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile solvents to a print surface, or leaving the print surface tightly pressed against other surfaces or objects for

prolonged periods.



If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene or

cellophane.

Color may change over time or depending on storage conditions. Canon assumes no liability for color

changes.

Cleaning Up After Printing

After you nish printing, follow the steps below to clean up and store SELPHY.

Turn off SELPHY (p. 11), then remove the memory card or USB ash memory.



Lower the screen (LCD monitor) completely for storage.



Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY.



If the compact power adapter is hot, wait until it has cooled down before you store it.



Remove the paper cassette and close the paper cassette compartment cover. Keep the remaining paper



the cassette and store the cassette in a dark place free from dust.

inside

Keep the ink cassette inside SELPHY.



Store SELPHY horizontally, in a dark place free from dust.



When not using SELPHY, make sure to store the printer with the screen (LCD monitor) completely lowered.



If dust enters SELPHY and sticks to the paper or color ink, print quality will deteriorate.



When you have more than one ink cassette, keep one inside SELPHY, and put the other inside the original packaging or a bag to protect it from dust, and store it in a dark place.



When storing new paper and ink cassettes, leave them in unopened packages, and keep them in a dark

place.

Printing a Variety of Images

COPY

You can use various printing features, such as imprinting the shooting date or adjusting the color of an image. You do not need to repeat the settings for each image because once the settings are made, they are applied

for all images.

Making Settings

Display the settings screen.

Press the k button.



Press the ud buttons to select [Print Settings], then



press the o button.

Select the item and change the settings.

Press the ud buttons to select an item.



Press the l r buttons to change the settings, then press



the v button to complete the setting. Pressing the v button again will restore the image



display screen. Refer to pp. 18 – 21 for information about each setting.



Print.

Select an image for printing (p. 13) and the number of



copies (p. 13), then press the p button to print.

Printing With the Date (Date)

COPY

You can print the shooting date recorded by the



digital camera.

Off (Default setting) / On



08/08/2010



Turning off SELPHY will return the setting to [ Off].



Since the date printed will be the date the image was recorded by the digital camera, it cannot be changed on SELPHY.



You can change the style of the printed date in [Date Format] (p. 21).



The date will not print if [

Index], [

ID Photo] or [ Shufe] is selected in [Page Layout] (p. 19).

Getting the Best Results With Auto Correction (Image Optimize)

SELPHY will automatically correct the image to



achieve optimum image quality.

Off / On (Default setting)



Some images may not be adjusted correctly.



Turning off SELPHY will return the setting to [ On].



When [Page Layout]



The level of correction will change depending on the page layout and paper size.

(p. 19) is set to [

Index], [Image Optimize] will not be applied.

Correcting Red Eyes and Printing (Correct Red-Eye)

Correct images with red-eye.



Off (Default setting) / On



Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [ On] only when printing images with red-eye.



If SELPHY is turned off or the memory card is removed, the setting will return to [ Off].



Red-eye may not be automatically detected or optimally corrected when faces appear extremely small, large, dark or bright in relation to the overall image, with faces turned to the side or diagonally, or faces with a portion hidden.



Red-eye correction is not available if [

Layout] (p. 19).



[

When



The level of correction will change depending on the page layout and paper size.

Sepia] or [ B/W] is selected in [My Colors] (p. 20), red-eye correction will not be applied.

2-up], [ 4-up], [ 8-up], or [ Index] is selected in [Page

Selecting a Layout and Printing (Page Layout)

COPY

You can set the number of images that you want



to print on one sheet. The number of images that you specied (p. 13) will be printed in the selected

layout.

1-up

(Default setting)

2-up Prints two images on one sheet

4-up Prints four images on one sheet

8-up* Prints eight images on one sheet

* Set the layout to [

  



Prints one image using a full sheet Index Prints as an index

8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet) (p. 2).

The settings will be retained even if SELPHY is turned off or the memory card is removed from the slot. The image position cannot be specied.

Depending Red-Eye] If index print.

on the selected layout, the settings made in [Date] (p. 18), [Image Optimize] (p. 18), [Correct

(p. 18), [Borders] (p. 20), [Smooth Skin] (p. 21), or [Brightness] (p. 21) may not be applied.

you select [Print All Images]

Printing an ID Photo (ID Photo)

Paper Picture Size

L Size

Postcard Size

45 x 35 mm

(1.8 x 1.4 in.)

60 x 51 mm

(2.4 x 2.0 in.)

ID Photo Prints ID photos on one sheet

Shufe

(p. 15) in [

Index], you can print all images on a memory card as an

Prints two ID photos each in three different sizes for



a total of six photos on a single sheet, as shown in

the picture at the left.

Prints can be made on L size or Postcard size paper



(p. 2).

(1.6 x 1.2 in.)

45 x 35 mm

(1.8 x 1.4 in.)

x 30 mm

Automatically a variety of sizes for printing on a single sheet (p. 20)

arranges images in

30 x 24 mm

(1.2 x 0.9 in.)

x 30 mm

(1.6 x 1.2 in.)

The ID photo may not be accepted ofcially, depending on the institution the ID photo is required for. Please

contact the appropriate institution for details.

Arranging Images of Different Sizes (Shufe)

COPY

Shufe automatically arranges images in a variety of



sizes for printing.

A group of up to 8 images, or a group of up to 20



images can be printed on a single sheet. Prints can be made on L size or Postcard size paper



(p. 2).

In “Making Settings” (p. 17), p



to select [Page Layout] in the screen in Step 2. Press the l r buttons to select [Shufe], then press the o button.

When the screen shown on the left appears, press



the ud buttons to select an option. Press the l r buttons to change the settings, then



press the v button to complete the setting. Pressing the v button twice will restore the image



display screen.



The image position cannot be specied.



If you select [20] in [Max. Images], it may take some time before images start printing.

ress the ud buttons

Printing With or Without a Border (Borders)

You can set images to print with or without a border.



Borderless (Default setting) / Bordered



Turning off SELPHY will return the setting to [



If you select [ even if [

8-up] when printing on card sized paper (p. 2), images will be printed without borders,

Bordered] is selected in [Page Layout] (p. 19).

Borderless

Changing the Color Tone and Printing (My Colors)

You can adjust the colors in your images, or make your images sepia-toned or black and white.



Off

(Default setting)

Vivid

Neutral



Turning off SELPHY will return the setting to [ Off].



Depending on the settings made in My Colors, [Correct Red-Eye] (p. 18) settings may not be applied.

— Positive Film

Emphasizes the contrast and color saturation for a vivid impression

Tones down the contrast and color

saturation

for neutral hues

Sepia

B/W

Intense, natural colors like those

obtained with positive lm

Changes the image to sepia tone

Black and white

Making Skin Look Smooth in Prints (Smooth Skin)

COPY



Makes skin look smooth and beautiful in prints.



Off (Default setting) / On



When printing is nished, turning off SELPHY and removing the memory card will return the setting to [

Off].



Correction may be applied to areas other than skin, producing unexpected results.



When

[Page Layout] (p. 19) is set to [

Index], [Smooth Skin] will not be applied.

Adjusting the Brightness (Brightness)

You can adjust the brightness of an image within a



range of ±3.

The larger the + value, the brighter the image gets.



The larger the - value, the darker the image gets.



Turning off SELPHY will return the setting to [0].



[Brightness] is not available if [

Index] is selected in [Page Layout] (p. 19).

Changing the Date Format (Date Format)

You can change the order of the printed date



(p. 18).

mm/dd/yy (Default Setting), dd/mm/yy, yy/mm/dd



2010/08/0808/08/2010

The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.

+ 51 hidden pages