Canon 4343B001, S95 User Manual

Camera User Guide
COPY
• Make sure you read this guide, including the "Safety Precautions" section, before using the camera.
• Store this guide safely so that you can use it in the future.
ENGLISH
Checking the Package Contents
Camera
Interface Cable
IFC-400PCU
Battery Pack NB-6L
(with Terminal Cover)
Battery Charger
CB-2LY/CB-2LYE
Stereo AV Cable
AVC-DC400ST
Wrist Strap
WS-DC9
Warranty
Card
Getting Started
DIGITAL CAMERA
Solution Disk
“Canon Customer
Support” Leaflet
COPY
If anything is missing, contact the retailer from which you purchased the camera.
Using the PDF Manuals
Also refer to the PDF manuals on the CD-ROM. After installation, shortcut icons appear on the desktop. If the software installation fails, you can find the manuals in the Readme folder on the CD-ROM.
Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many features to shoot more challenging photos.
Personal Printing Guide
Read when you want to connect the camera to a printer (sold separately) and print.
Software Guide
Read when you want to use the included software.
A memory card is not included.
Adobe Reader is required to view the PDF manuals.
2
Test Shots and Disclaimer
Read This First
COPY
Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not record images that infringe upon copyright laws without the prior permission of the copyright holder. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a problem with the camera while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the customer support list supplied with your camera.
LCD Monitor (Screen)
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but occasionally non-performing pixels may appear as bright or dark dots. This is not a malfunction and has no effect on the recorded image.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
4
Shoot, leaving it to the camera to make settings .........................24
IwP
At the beach
(p. 62)
Against snow
(p. 62)
Portraits
(p. 61)
Take good people shots
J
Landscape
(p. 61)
O
Foliage
(p. 62)
Shoot various other scenes
Low Light
(p. 60)
t
Fireworks
(p. 63)
V
Kids and pets
(p. 62)
S
Underwater
(p. 62)
Miniature Effect
(p. 72)
Super vivid colors
(p. 63)
Poster Effect
(p. 63)
Fish-eye Effect
(p. 71)
Shoot with special effects
Take pictures that
looked aged (p. 70)
Shoot
Focus on faces
............................................................24, 62, 88, 92
Shoot in places where I cannot use the flash (turn off the flash) .54
Take pictures with me in them too (self-timer)................... 59, 65, 66
Insert the date and time into my shots .........................................58
COPY
4
What Do You Want to Do?
1
Look at my pictures ...................................................................... 27
Automatically play back pictures (slideshow).............................125
Look at my pictures on a TV ......................................................129
Look at my pictures on a computer. ............................................. 32
Quickly search pictures ......................................................122, 123
Erase pictures ......................................................................28, 136
View
E
Shoot movies .......................................................................29, 113
View movies ................................................................................. 31
Shoot/View Movies
2
Easily print pictures .................................................................... 148
Print
Save images to a computer .........................................................32
Save
3
Turn off sounds ............................................................................48
Use the camera abroad........................................................15, 160
Understand what is displayed on the screen .............................178
Other
COPY
5
Chapters 1 – 3 explain the basic operations and frequently used functions of
Table of Contents
COPY
this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Table of Contents ..............................6
Conventions Used in This Guide .......9
Safety Precautions...........................10
1 Getting Started................... 13
Charging the Battery ........................14
Compatible Memory Cards (Sold
Separately) ......................................16
Inserting the Battery and
Memory Card ...................................16
Setting the Date and Time ...............19
Setting the Display Language..........21
Formatting Memory Cards ...............22
Pressing the Shutter Button .............23
Taking Pictures (Smart Auto)...........24
Viewing Images ...............................27
Erasing Images ................................28
Shooting Movies ..............................29
Viewing Movies ................................31
Transferring Images to a Computer
for Viewing .......................................32
Accessories .....................................37
Separately Sold Accessories ...........38
2 Learning More.................... 41
Components Guide ..........................42
Screen Display.................................44
Indicator ...........................................45
FUNC. Menu – Basic Operations ....46
MENU – Basic Operations ...............47
Changing the Sound Settings ......... 48
Changing the Screen Brightness ....49
Returning the Camera to Default
Settings ........................................... 50
Power Saving Function (Auto
Power Down)................................... 51
Low Level Memory Card
Formatting ....................................... 51
Clock Functions............................... 52
3 Shooting with Commonly
Used Functions ..................53
Turning the Flash Off ...................... 54
Zooming in More Closely on
Subjects (Digital Zoom) ................... 55
Shoot Using Preset Focal Lengths
(Step Zoom) .................................... 57
Inserting the Date and Time ............ 58
Using the Self-Timer ....................... 59
Shooting in Low Light Conditions
(Low Light) ...................................... 60
Shooting in Various Conditions....... 61
Detecting a Smile and Shooting...... 64
Using the Wink Self-Timer .............. 65
Using the Face Self-Timer .............. 66
Shooting High Contrast Scenes
(High Dynamic Range) .................... 68
Shooting with Faded Colors
(Nostalgic) ....................................... 70
Shoot with the Effects of a
Fish-Eye Lens (Fish-eye Effect)...... 71
Take Shots That Look Like a Miniature Model (Miniature Effect) .. 72
6
Table of Contents
COPY
4 Choosing Settings
Yourself...............................73
Shooting in Program AE ................. 74
Adjusting the Brightness (Exposure
Compensation)................................ 74
Turning the Flash On ...................... 75
Changing the Focusing Range
(Macro)............................................ 75
Changing the Recording Pixel
Setting (Image Size) ....................... 76
Changing the Compression Ratio
(Image Quality) ............................... 76
Shooting RAW Images.................... 78
Changing the Aspect Ratio ............. 79
Changing the ISO Speed................ 80
Shooting Using a TV Monitor.......... 81
Adjusting the White Balance ........... 82
Continuous Shooting....................... 84
Changing the Tone of an Image
(My Colors) ..................................... 85
Changing the Composition
with the Focus Lock ........................ 86
5 Getting More Out of Your
Camera................................87
Changing the AF Frame Mode........ 88
Choosing the Subject to Focus On
(Tracking AF) .................................. 89
Shooting with the AF Lock .............. 90
Magnifying the Focal Point.............. 91
Choosing the Person to Focus On
(Face Select)................................... 92
Shooting in Manual Focus Mode .... 93
Focus Bracketing
(Focus-BKT Mode).......................... 94
Shooting with Servo AF...................94
Changing the Metering Method....... 95
Shooting with the AE Lock .............. 96
Shooting with the FE Lock...............96
Auto Exposure Bracketing
(AEB Mode)..................................... 97
Setting the Shutter Speed ............... 98
Setting the Aperture Value ..............99
Setting the Shutter Speed and
Aperture Value .............................. 100
Making Settings using the
Control Ring .................................. 101
Correcting the Brightness and
Shooting (i-Contrast) .....................104
Red-Eye Correction ....................... 105
Shooting with Slow Synchro.......... 106
Adjusting the Flash Exposure
Compensation ............................... 106
Adjusting the Flash Output ............107
Registering Shooting Settings....... 108
Changing the Color and Shooting . 109
Checking for Shut Eyes ................. 111
Shooting Stitch Assist Images....... 112
6 Using Various Functions for
Shooting Movies.............. 113
Changing the Movie Mode ............114
Shoot Movies That Look Like a Miniature Model (Miniature Effect) 114
Changing the Image Quality.......... 116
AE Lock/Exposure Shift................. 117
Using the Wind Filter ..................... 117
Other Shooting Functions.............. 118
Playback Functions ....................... 118
Editing ........................................... 119
7
Table of Contents
COPY
7 Using Various Playback and
Editing Functions ............ 121
Quickly Searching Images.............122
Viewing Images in Filtered
Playback ........................................123
Viewing Slideshows .......................125
Checking the Focus .......................126
Magnifying Images.........................127
Displaying Various Images
(Smart Shuffle)...............................127
Changing Image Transitions..........128
Viewing Images on a TV ................129
Viewing Images on
a High-Definition TV.......................130
Protecting Images..........................132
Erasing Images ..............................136
Tagging Images as Favorites ........138
Organizing Images by Category
(My Category) ................................139
Rotating Images.............................141
Resizing Images ............................142
Trimming........................................143
Adding Effects with the My Colors
Function .........................................144
Correcting the Brightness
(i-Contrast) .....................................145
Correcting the Red-Eye Effect.......146
8 Printing .............................147
Printing Images ............................. 148
Printing from the Print List
(DPOF).......................................... 150
Choosing Images for Printing
(DPOF).......................................... 151
Print Added Images.......................154
9 Customizing Camera
Settings.............................155
Changing Camera Settings ........... 156
Changing Shooting Function
Settings ......................................... 162
Registering Commonly Used
Shooting Menus (My Menu) .......... 167
Changing Playback Function
Settings ......................................... 168
10Useful Information ...........169
Using Household Power................ 170
Using an Eye-Fi Card .................... 171
Troubleshooting ............................ 173
List of Messages That Appear
on the Screen................................ 176
Information Displayed on the
Screen........................................... 178
Handling Precautions .................... 181
Functions Available in Each
Shooting Mode..............................182
Menus ........................................... 184
Specifications ................................ 188
Index ............................................. 191
8
Icons are used in the text to represent the camera buttons and control dial.
Conventions Used in This Guide
Right button
FUNC./SET button
Up button
Left button
Down button
Control dial
Ê
Ï Control Ring
COPY
Language that displays on the screen appears inside [ ] (square brackets).
The directional buttons, control dial, FUNC./SET button and control ring
are represented by the following icons.
: Things you should be careful about
: Troubleshooting tips
: Hints for getting more out of your camera
: Supplemental information
(p. xx): Reference pages (“xx” stands for a page number)
This guide assumes all functions are at their default settings.
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
9
Before using the product, please ensure that you read the safety precautions
Safety Precautions
COPY
described below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Warning
Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
Do not let the product come into contact with water (e.g. sea water) or other
liquids.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire. If liquids or foreign objects come into contact with the camera interior, immediately turn the camera power off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or the closest Canon Customer Support Help Desk.
Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.
Denotes the possibility of serious injury or death.
10
Safety Precautions
COPY
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause injury and damage the surroundings. In the event that a battery leaks and the battery acid contacts eyes, mouth, skin or clothing, immediately flush with water.
Caution
Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
Avoid using, placing or storing the product in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries. High temperatures may cause deformation of the camera or battery charger casing.
The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
Take care not to pinch your finger when the flash lowers.
This could result in injury.
Denotes the possibility of injury.
11
Safety Precautions
COPY
Caution
Do not aim the camera at bright light sources (the sun, etc.).
Doing so may damage the image sensor.
When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
Do not forcibly push down or pull up the flash.
This may cause the camera to malfunction.
In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage.
Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the screen.
Denotes the possibility of damage to the equipment.
12
Getting Started
1
Strap
COPY
This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view movies and
transfer images to a computer.
Attaching the Strap/Holding the Camera
Be sure to attach the supplied strap to the camera and wrap it around your
wrist when shooting to avoid dropping the camera. The strap can also be attached to the left side of the camera.
Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash while it is raised.
13
Use the included charger to charge the battery. Be sure to charge the battery
Charging the Battery
CB-2LY
CB-2LYE
COPY
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
Align the o marks on the battery and
charger, then insert the battery by sliding it in ( ) and down ( ).
Charge the battery.
For CB-2LY: Flip out the plug ( ) and
plug the charger into a power outlet ( ).
For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a power outlet.
X The charge lamp lights orange and
charging starts.
X The charge lamp will light green when
charging has finished. Charging takes approx. 1 hour and 55 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it in ( ) and up ( ).
To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously.
14
Charging the Battery
Attach the cover to a charged battery so that the o mark is visible.
COPY
Approximate Number of Shots That Can Be Taken
Number of Shots
The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Playback Time
Approx. 200
Approx. 5 hrs.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge state.
Display Summary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Recharge the battery.
Using the battery and charger effectively
Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and store the battery. Storing a battery for long periods of time (about a year) without depleting it may shorten its life span or affect its performance.
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use electrical transformers for foreign travel as they will cause damage.
The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk.
If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
15
SD memory cards (2 GB and less)*
Compatible Memory Cards (Sold Separately)
Inserting the Battery and Memory Card
COPY
SDHC memory cards
(more than 2 GB, up to and including 32 GB)*
SDXC memory cards
(more than 32 GB)*
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
Eye-Fi Cards
* This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Depending on your computer’s OS version, SDXC memory cards may not be recognized when using a commercially available card reader. Check to make sure that your OS supports this function beforehand.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
If the memory card has a write-protect tab,
you will not be able to record images if the tab is in the locked position. Slide the tab up until you hear a click.
16
Inserting the Battery and Memory Card
Terminals
Label
COPY
Open the cover.
Slide the cover ( ) and open it ( ).
Insert the battery.
Insert the battery as shown until it locks
into place with a click.
Be sure to insert the battery in the correct
direction or it will not properly lock into place.
Insert the memory card.
Insert the memory card as shown until it
locks into place with a click.
Be sure the memory card is oriented
correctly. Inserting the memory card in the wrong direction could damage the camera.
Close the cover.
Close the cover ( ), and press downward
as you slide it until it clicks into place ( ).
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards, and Eye-Fi cards have a write-protect tab. If this tab is in the locked position, [Memory card locked] will appear on the screen and you will not be able to take or erase images.
17
Inserting the Battery and Memory Card
Number of shots that can be taken
COPY
Removing the Battery and Memory Card
Remove the battery.
Open the cover and press the battery lock
in the direction of the arrow.
X The battery will pop up.
Remove the memory card.
Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
Approximate Number of Shots per Memory Card
Memory Card
Number of Shots
Values are based on the default settings.
The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a Shooting mode (p. 24).
4 GB 16 GB 1471 6026
18
The Date/Time settings screen will appear the first time the camera is turned
Setting the Date and Time
COPY
on. Since the dates and times recorded into your images are based on these settings, be sure to set them.
Turn on the camera.
Press the power button.
X The Date/Time screen will appear.
Set the date and time.
Press the qr buttons to choose an option.
Press the op buttons or turn the Ê dial
to set a value.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose in Step 2 and press the op buttons or turn the Ê dial and choose , you will set the time to daylight saving (1 hour ahead).
Complete the setting.
Press the m button.
X Once the date and time have been set, the
Date/Time screen will close.
Pressing the power button will turn off the
camera.
19
Setting the Date and Time
COPY
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
Press the n button.
Choose [Date/Time] in the 3 tab.
Press the qr buttons to choose the 3
tab.
Press the op buttons or turn the Ê dial
to choose [Date/Time], then press the m button.
Change the date and time.
Follow Steps 2 and 3 on p. 19 to adjust the
Date/Time battery
The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack has been removed.
By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 38) the date/time battery can be charged in about 4 hours even if the camera is not turned on.
If the date/time battery is depleted, the [Date/Time] menu will appear when you
turn the camera on. Follow the steps on p. 19 to set the date and time.
setting.
Pressing the n button will close the
menu.
20
You can change the language that displays on the screen.
Setting the Display Language
COPY
Enter Playback mode.
Press the 1 button.
Display the settings screen.
Press and hold the m button, then
immediately press the n button.
Set the display language.
Press the opqr buttons or turn the Ê
dial to choose a language, then press the m button.
X Once the display language has been set,
the settings screen will close.
What if the clock appears when the m button is pressed?
The clock will appear if too much time passes between pressing the m button and the n button in Step 2. If the clock appears, press the m button to remove the clock and repeat Step 2.
You can also change the display language by pressing the n button, choosing the 3 tab, and choosing the [Language] menu item.
21
Before you use a new memory card or one that has been formatted in other
Formatting Memory Cards
COPY
devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Before formatting an Eye-Fi card (p. 171), be sure to install the software contained on the card to a computer.
Display the menu.
Press the n button.
Choose [Format].
Press the qr buttons to choose the 3
tab.
Press the op buttons or turn the Ê dial
to choose [Format], then press the m button.
Choose [OK].
Press the qr buttons or turn the Ê dial to
22
choose [OK], then press the m button.
Format the memory card.
Press the op buttons or turn the Ê dial
to choose [OK], then press the m button.
X The memory card will be formatted.
Complete formatting.
X When formatting ends, [Memory card
formatting complete] will appear on the screen.
Press the m button.
Pressing the Shutter Button
Pressing the Shutter Button
COPY
Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen may be less than indicated on the memory card.
To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then press fully to shoot.
Press halfway (Press lightly to focus).
Press lightly until the camera beeps twice
and AF frames appear where the camera focused.
Press fully (Press fully to shoot).
The camera plays the shutter sound and
Does the length of the shutter sound change?
Since the time required to shoot differs according to the scene you want to take,
the length of the shutter sound may change.
If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
If you shoot without pressing the shutter button halfway, the image may not be in focus.
X
takes the shot.
Since the shot is being taken while the
shutter sound plays, be careful not to move the camera.
23
Since the camera can determine the subject and shooting conditions, you can
Taking Pictures (Smart Auto)
Zoom bar
COPY
let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels.
Turn on the camera.
Press the power button.
X The start-up screen will appear.
Choose A mode.
Set the mode dial to A.
When you point the camera toward the
subject, the camera will make a slight noise as it determines the scene.
X The icon for the determined scene will
appear in the upper right of the screen.
X The camera will focus on detected faces
and display frames on them.
Compose the shot.
Moving the zoom lever toward i
(telephoto) will zoom in on your subject, making it appear larger. Moving the lever toward j (wide angle) will zoom out from your subject, making it appear smaller. (The zoom bar showing the zoom position appears on the screen.)
You can turn the Ï ring to zoom in on your
subject (Step Zoom, p. 57).
24
Taking Pictures (Smart Auto)
AF Frame
COPY
Focus.
Press the shutter button halfway to focus.
X The flash will rise automatically in dark
environments.
X When the camera focuses, it will beep
twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point.
Shoot.
Press the shutter button fully to shoot.
X The camera will play the shutter sound and
shoot. The flash will automatically fire in low light conditions if it has been raised.
X The image will appear on the screen for
about two seconds.
You can take a second picture even while
What if an icon appears in the upper right of the screen?
The icon for the determined scene will appear in the upper right of the screen. For details on the icons that appear, see “Scene Icons” (p. 179).
an image is displayed by pressing the shutter button again.
Choosing the subject to focus on (Tracking AF)
After pressing the o button and displaying , point the camera so that is on the subject you want to focus on. Press and hold the shutter button halfway to display a blue frame where focus and exposure will be maintained (Servo AF). Press the shutter button fully to shoot.
25
Taking Pictures (Smart Auto)
COPY
What if...
What if the color and brightness of the images do not turn out as expected?
The scene icon (p. scene. If this happens, try shooting in G mode (p.
What if white and gray frames appear when you point the camera toward
a subject?
When faces are detected, a white frame appears on the face of the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range (p. 88). If the main subject moves, however, the gray frames will disappear, leaving only the white frame.
What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and exposure will continuously adjust (Servo AF).
What if the indicator blinks orange and flashes on the screen?
Attach the camera to a tripod so that the camera does not move and blur the image.
What if the camera does not play any sounds?
Pressing the l button while turning on the camera power will turn off all sounds except for warning sounds. To turn the sounds on, press the n button to choose [Mute] in the 3 tab, then press the qr buttons to choose [Off].
What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is approximately 50 cm – 6.5 m (1.6 – 21 ft.) at maximum wide angle (j), and approximately 90 cm – 3.0 m (3.0 – 9.8 ft.) at maximum telephoto (i).
What if the camera beeps once when the shutter button is pressed halfway?
Your subject may be too close. Move the zoom lever toward j and hold it until the lens stops moving. The camera will be at its maximum wide angle setting and you will be able to focus on subjects that are about 5 cm (2.0 in.) or more away from the end of the lens. Move the zoom lever toward i and hold it until the lens stops moving. The camera will be at its maximum telephoto setting and you will be able to focus on subjects that are about 30 cm (12 in.) or more away from the end of the lens.
What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas.
What if the h icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
“Wrong flash position. Restart the camera.” appears on the screen.
Appears if your finger is pressing on the flash when it tries to pop-up or if something else hinders the movement of the flash.
179
) that appears on the screen may not match the actual
74
).
26
You can view the images you have taken on the screen.
Viewing Images
COPY
Enter Playback mode.
Press the 1 button.
X The last image you took will appear.
Choose an image.
Pressing q or turning the Ê dial counter-
clockwise will cycle through the images in the reverse order they were taken, from the newest image to the oldest.
Pressing r or turning the Ê dial clockwise
will cycle through images in the order they were taken, from oldest to newest.
The images change more quickly if you
keep the qr buttons pressed, but they will appear coarse.
The lens will retract after approximately 1
minute elapses. If the flash has been
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the camera to Shooting mode.
raised, the flash will lower.
Pressing the 1 button again while the
lens is retracted will turn off the power.
27
You can choose and erase images one at a time. Please note that erased
Erasing Images
COPY
images cannot be recovered. Exercise adequate caution before erasing an image.
Enter Playback mode.
Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
Press the qr buttons or turn the Ê dial to
display an image to erase.
Erase the image.
Press the p button.
Press the qr buttons or turn the Ê dial to
choose [Erase], then press the m button.
X The displayed image will be erased.
To exit instead of erasing, press the qr
buttons or turn the Ê dial to choose [Cancel], then press the m button.
28
The camera can automatically select all settings so that you can shoot movies
Shooting Movies
Remaining Time
COPY
just by pressing the shutter button. The audio will record in stereo.
Enter E mode.
Set the mode dial to E.
Compose the shot.
Moving the zoom lever toward i will zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller.
You can turn the Ï ring to zoom in on your
subject (Step Zoom, p. 57).
Focus.
Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice.
Shoot.
Press the shutter button fully.
29
Shooting Movies
Elapsed Time
Microphone
COPY
X Recording will start, and [ Rec] and the
elapsed time will appear on the screen.
Once shooting begins, take your finger off
the shutter button.
If you change the composition of your shot
during shooting, the focus will stay the same, but the brightness and tone will automatically adjust.
Do not touch the microphone while
shooting.
Do not press any buttons other than the shutter button while shooting. The sound the buttons make will be recorded in the movie.
Stop shooting.
Fully press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The movie will record to the memory card. X Shooting will automatically stop when the
Magnifying the subject while shooting
Pressing the zoom lever toward i will zoom in on the subject. However, operation sounds will be recorded and the movie may appear coarse. Also, you cannot use the Ï ring to zoom.
memory card fills.
Estimated Shooting Times
Memory Card
Shooting Time
Shooting times are based on default settings.
Maximum clip length is approx. 29 min. 59 sec.
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
30
4 GB 16 GB
25 min. 8 sec. 1 hr. 42 min. 57 sec.
Loading...
+ 166 hidden pages