Canon 320 User Manual

Photo Printer

Direct Photo Guide

Table of Contents

Introduction 1

How to Use the Documentation Provided 2

Printer Parts and Their Functions 3

Loading Printing Paper 8

Printing from a Memory Card 10

Printing Photographs Directly from a Compliant Device 21

Printing Photographs from a Wireless Communication Device 25

Routine Maintenance 27

Changing the Printer Settings 33

Troubleshooting 35

Appendix 47

series

Getting Help from Canon

Help Us Help You Better

Before you contact Canon, please record the following information.

Serial Number (located on the bottom of the product): ______________________________________________________________________________________________

Model Number (located on the top of the product): _________________________________________________________________________________________________

Setup CD-ROM number (located on the CD-ROM): ________________________________________________________________________________________________

Purchase Date: ____________________________________________________________________________________________________________________________

Customer Technical Support Sequence*

1. Internet — www.canontechsupport.com

For quick and comprehensive self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and “where to buy” instructions are found here.

2. Email Tech Support — www.canontechsupport.com

For individual attention to a special issue, try emailing our friendly technical support representatives, specially trained to communicate quick, easy, and logical solutions to your inquiries within 24 hours.

3. Toll-Free Live Tech Support — (1-800-828-4040)

This option provides live telephone technical support, free of service charges, Monday-Saturday (excluding holidays), during your product’s 1 year limited warranty period. Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752).

4. Extended Service and Support — www.canonesp.com

Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and support coverage at a very attractive price. CarePAK offers toll-free Canon technical support and includes Canon’s superb InstantExchange product replacement program. For further information about extending your Canon service and support, call (1-800-385-2155), or visit our Web site at www.canonesp.com. CarePAK must be purchased during your product’s warranty period.

For more information and updated program specifics, please visit our web site at www.canontechsupport.com.

*Support program specifics are subject to change without notice.

series

Photo Printer

Direct Photo Guide

Introduction

This Direct Photo Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols.

Warn ing

Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation.

Caution

Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation.

Important

Instructions that must be observed for safe operation.

Depending on your application program, operations may differ. For details, refer to the instruction manual of your application. The steps described in this manual are in Windows Vista™ operating system Ultimate Edition (hereafter referred to as “Windows Vista”) and

OS X v.10.4.x.

Mac

Trademark Notices

z “Microsoft” is a registered trademark of Microsoft Corporation. z “Windows” is a trademark of Microsoft Corporation, registered in the U.S. and other

countries.

z “Windows Vista” is a trademark of Microsoft Corporation. z “Macintosh” and “Mac” are trademarks of Apple Inc., registered in the U.S. and other

countries.

z “Adobe” and “Adobe RGB (1998)” are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and or other countries.

z “Memory Stick”, “Memory Stick PRO”, “Memory Stick Duo” and “Memory Stick PRO

Duo” are trademarks of Sony Corporation.

z “xD-Picture Card” is a trademark of Fuji Film Co. Ltd. z “MultiMediaCard” is a trademark of the MultiMediaCard Association. z “SD Card”, “miniSD Card”, and “microSD Card” are trademarks of SD Association. z “IrDA Feature Trademark” is owned by the Infrared Data Association and used

under license therefrom.

z “Bluetooth” is a trademark of Bluetooth SIG, Inc.,U.S.A. and licensed to Canon Inc.

Exif Print

This printer supports ExifPrint. Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.

International ENERGY STAR® Program

As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the

STAR guidelines for energy efficiency.

ENERGY

Power Requirements

Never use a power supply voltage other than that supplied in the country of purchase. Using the incorrect voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are as follows:

AC 100-240 V, 50/60 Hz

About Consumables

Consumables (ink tanks / FINE Cartridges) are available for 5 years after production has stopped.

Safety Precautions

Warn ing

z Never attempt to plug the power cord into the power outlet or unplug the power cord

when your hands are wet.

z Never damage, modify, stretch, or excessively bend or twist the power cord. Do not

place heavy objects on the power cord.

z Never use any power supply other than the standard power supply available in the

country of purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.

z Always push the plug all the way into the power outlet.

Caution

z For safety reasons, store ink tanks out of the reach of small children. z Do not drop or shake ink tanks as this may cause the ink to leak out and stain your

clothes and hands.

Also read the “Safety Precautions” on page 50. Observe the warnings and cautions to avoid personal injury or damage to the printer.

1Introduction

How to Use the Documentation Provided

Printed Documentation Setup Sheet

Be sure to read this sheet first.

This sheet explains how to setup the printer and the procedure to install the printer driver.

Direct Photo Guide (This guide)

Read this guide when starting to use the printer.

This guide explains how to print photos while viewing them on the LCD, and the procedure of doing the regular maintenance of the printer.

On-screen Manuals User’s Guide

Read this guide when starting to use the printer.

If you need further information about the printer, please refer to the User’s Guide, which can be installed from the Setup CD-ROM. This guide provides detailed instructions for printing from your computer.

Additional guides are also available for advanced features.

PC Printing Guide

Refer to this guide for full instructions on printer driver setting. PC Photo Printing Guide (Windows Refer to this guide for full instructions on using the various application

software included on the Setup CD-ROM.

only)

2 How to Use the Documentation Provided

Printer Parts and Their Functions

Main Components

 Front View

Paper Feed Tray

Open and fold in half before printing to support paper.

Paper Guide

Slide against the left side of the paper stack to support paper so that it feeds properly.

Printer Cover

Open by sliding the Lock Switch to replace the ink tank or remove jammed paper.

LCD Monitor

Displays menus, setting items, and photos for printi ng. For information on Screen-saver mode, see “Screensaver mode” on page 7.

Open button

Press to open the Paper Feed Tray and Paper Output Tray.

Operation Panel

Changes the settings and operates the printer. See “Operation Panel” on page 5.

Paper Output Tray

The printed paper will be ejected.

Rear Tray

Load paper here.

IrDA Port

Use this port to perform wireless printing through infrared communication. See “Printing Photographs from a Wireless Communication Device” on page 25.

USB Connector (for computer)

Plug in the USB cable connecting the printer to a computer here.

Direct Print Port

Connect your PictBridge compliant device, such as a digital camera, here to print directly from it. See “Printing Photographs Directly from a Compliant Device” on page 21. You can also connect the Bluetooth Unit BU-20* to perform wireless printing through Bluetooth communication. For details, refer to the User’s Guide onscreen manual.

Card Slot

Set the memory card he re. See “Using the Memory Card” on page 10.

Access lamp

Lights or flashes to indicate the status of the memory card. See “Inserting the Memory Card” on page 11.

Lock Switch

Slide to the right to open the Printer Cover.

*The Bluetooth unit is not available in some countries or regions depending on the local laws and regulations. For details, contact your local Canon Service representative.

3Printer Parts and Their Functions

 Rear View

 Interior

Ink lamp

Lights or flashes red to indicate the status o f the ink tank. See “Replacing an Ink Tank” on page 31.

Print Head Holder

The print head is installed in advance.

Battery Connector Cover

Remove each cover to attach the optional Portable Kit. To attach the optional Portable Kit, refer to the instruction manual provided with the Portable Kit.

AC Adapter Connector

Connector used to connect the supplied AC Adapter plug.

Carrying Handle

Pull out this handle to carry the printer.

4 Printer Parts and Their Functions

Print Head Lock Lever

Locks the Print Head.

Paper Thickness Lever

Move to the right when printing.

Important

Do not pull this lever up. If you have accidentally pulled them up, adjust the print head

position. See “Aligning the Print Head” on page 29.

Move to the left if ink smudges or

the printed surface is stained. Return to the right after printing.

See “The Paper Thickness Lever position is incorrect.” on page 42.

Note

For information on how to install the ink tank, refer to your setup sheet.

 Operation Panel

How to Navigate Menus on the LCD

(1) (2) (5)(3) (4) (8)(7)(6)

(1) ON/OFF button

Turns the printer on and off. See “Turning On/Off the Printer” on page 6.

(2) Buttons to be used to navigate menus on the LCD

See “How to Navigate Menus on the LCD” on right column.

(3) OK button

Finalizes your selection for the menu or setting item. See “How to Navigate Menus on the LCD” on right column. Dismisses the error message and resumes the printer’s normal operation after resolving a printing error or removing jammed paper.

(4) [+][-] buttons

Specifies the number of copies to print.

(5) Print button

Press to start printing according to the settings displayed on the LCD.

(6) Stop/Reset button

Cancels a print job in progress.

(7) Power lamp

Lights or flashes blue to indicate the power status.

(8) Alarm lamp

Lights or flashes orange when an error, such as paper-out or ink-out, occurs.

Note

Power lamp indicates the power status. Off: The printer is turned off. Lighting: The printer is ready to print, is currently printing, or is in operation. Flashing: The printer is preparing to turn on or off.

(1) Home screen (2) Left Function button (3) Right Function button (4) NAVI button (5) HOME button (6) Back button (7) OK button (8) {, }, [, and ] buttons (9) Easy-Scroll Wheel

(1)

(2)

(3)

(9)(8)(7)(6)(5)(4)

 Basic Operation

This section describes the operation to navigate menus with the Easy-Scroll Wheel, {, }, [, and ] buttons, and the OK button, taking the HOME screen

as an example.

1 Press the HOME button.

The HOME screen will appear.

2 Turn the Easy-Scroll Wheel to

select the menu, then press the OK button.

You can turn the Easy-Scroll Wheel left or right. You can also use the [ or ]button to select setting items.

Move the icon of the desired menu to position (A). The selected menu screen will appear.

You can select the following menus on the HOME screen:

Select and print:

You can print the photos saved on a memory card while displaying on the LCD, and specify the number of copies for each photo listed. See “Selecting Photographs to Print—Select and print” on page 12.

Layout print:

You can print your favorite photo in the specified layout. See “Printing Multiple Photos on One Sheet of Media—Layout print” on page 13.

(A)

5Printer Parts and Their Functions

Create item:

You can create your own items such as stickers or calendars using selected photo, or print your favorite photo with a frame. See “Using Other Useful Printing Function” on page 16.

Special photo print:

You can print all photos saved on a memory card and print photos according to the settings on the camera. You can also print a list of all photos and the photo information when you shot. See “Using Other Useful Printing Function” on page

16.

Settings:

You can perform the maintenance or change the various settings of the printer. See “When Printing Becomes Faint or Colors Are Incorrect” on page 27 or “Changing the Printer Settings” on page 33.

Slide show:

You can display photos saved on a memory card on the LCD sequentially.

 Operation of Other Buttons

z Function buttons (2), (3)

Two Function buttons enable you to select the menu displayed at the bottom of the LCD.

The screen that appears when you press a Function button depends on the screen that is displayed and which Function button you press.

Left Function button (2): When you press the left Function button on the HOME

Right Function button (3): When you press the right Function button on the

When you press them on the other than the HOME screen, the operation procedure or the menus is displayed.

z Back button (6)

You can return the LCD to the previous screen.

z NAVI button (4)

When you do not know how to use the print function for the frequent use or how to load paper, you can easily get the explanation from the navigation menu.

screen, the remaining ink volume screen is displayed.

HOME screen, the introductions for the selected menu functions are displayed.

Turning On/Off the Printer

This section describes the method to turn on/off the printer.

 Turning On the Printer

Note

If the ink tank is not installed, refer to your setup sheet to install it.

1 Plug in the AC Adapter and connect the other end to a power

outlet.

2 Press the Open button, then open the Paper Feed Tray and the

Paper Output Tray, and then fold the Paper Feed Tray in half.

Note

Pull the LCD Monitor up and adjust its angle to a position where you can see it clearly.

6 Printer Parts and Their Functions

3 Press the ON/OFF button to turn the printer on.

1 Turn off the printer by pressing the ON/OFF button.

Access lamp

The Power lamp flashes, then changes to steady (non-flashing). The HOME screen appears on the LCD.

Note

If the Alarm lamp is lit orange and an error message is displayed on the LCD, see “Error Message Is Displayed on the LCD” on page 35.

 Turning Off the Printer

Check the following before turning off the printer.

z The Access lamp of the memory card is not flashing. z The printer is not operating.

Important

The Access lamp flashes while the printer is reading or writing data from/to the memory card. Removing the memory card or turning off the printer while the Access lamp is flashing may damage the data saved on the memory card.

The Power lamp goes out and the power will be turned off. Push down the LCD Monitor.

2 Close the Paper Feed Tray and then the Paper Output Tray.

Note

Power cord

Before unplugging the power cord, turn off the printer and ensure that the Power lamp has gone out. You may not be able to print afterward if you unplug the power cord when the Power lamp is lit or flashing.

 Screen-saver mode

If you leave the printer more than about 5 minutes without using any button on the operation panel when the printer is turned on, the LCD goes into Screensaver mode automatically.

Press the OK button to resume the LCD.

Note

When using the optional battery, the printer will be turned off automatically after about 5 minutes from when the LCD goes into Screen-saver mode.

7Printer Parts and Their Functions

Loading Printing Paper

This section describes the available page size and media type, and how to load paper.

Loading paper

1 Turn on the printer.

See “Turning On the Printer” on page 6.

Press the Open button, then open the Paper Feed Tray and

(1)

Paper Output Tray, and fold the Paper Feed Tray in half.

Note

Pull up the LCD Monitor and adjust its angle in the position where you can see it clearly.

(2) Press the ON/OFF button.

2 Flatten the four corners of the paper before loading it.

Note

If paper is curled, gently bend the corners in the opposite direction until the paper becomes flat. See “Paper is curled.” on page 42.

3 Ensure that the Paper Thickness Lever is set to the right.

Note

When printing, set the Paper Thickness Lever to the right. Set the Paper Thickness Lever to the left only if ink smudges or the printed surface is stained. Return the Paper Thickness Lever to the right after printing.

4 Load the paper.

Do not load higher than the Paper Guide’s thickness.

(1) Load the paper into the Rear Tray

with the print side facing up. If you use Canon genuine 4" x 6" /

101.6 x 152.4 mm paper, up to 20 sheets of paper can be loaded.

(2) Align the paper stack with the

(3) Slide the Paper Guide against the

left side of the paper stack.

z Photo stickers

Shorter margin

right edge of the Rear Tray.

z 4" x 6" or Card

8 Loading Printing Paper

Important

Always load paper in portrait or ientation.

Printing Media

This section describes the available page size and media type for direct printing. For informations of page size and media type when printing from a computer, refer to the User’s Guide on-screen manual.

 Compatible Media Type

Media Type and Model Printer Setting for Media Type

Glossy Photo Paper GP-401 Glossy Photo Paper

Glossy Photo Paper “Everyday Use” GP-501 Glossy Photo Paper

Photo Paper Glossy GP-502 Glossy Photo Paper

Photo Paper Plus Semi-gloss SG-101, SG-201

Photo Paper Plus Glossy PP-101

Photo Paper Pro PR-101

Matte Photo Paper MP-101 Matte Photo Paper

Photo Stickers PS-101

*1When loading a stack of paper, the printed side may become marked as it is fed

in. In this case, load paper one sheet at a time.

When printing on sticker paper, select Sticker print on the Create item screen. See “Printing Stickers with a Photo Saved on a Memory Card—Sticker print” on page 17.

Important

z Put unused paper back into the package, and store them avoiding heat, humidity, and

direct sunlight.

z Do not touch the printed surface nor stack the printed sheets until the ink is fixed.

Note

z You may not be able to purchase some Canon genuine papers depending on the

country or region of purchase.

z For information on the page sizes available for each Canon genuine paper, visit our

website.

z Paper Support Load Limit

5" x 7" / 127.0 x 177.8 mm: 10 sheets 4" x 6" / 101.6 x 152.4 mm, Wide, and Credit card: 20 sheets Photo Stickers: 1 sheet

Photo Plus Glossy

Photo Paper Pro

—

z Paper Output Tray Load Limit

We recommend that you remove the previously printed sheet from the Paper Output Tray before continuously printing to avoid blurs and discoloration.

 Selectable Page Size

Printer Setting for Page Size Width x Height

Credit card 2.13 x 3.39 inches / 54.0 x 86.0 mm

4"x6"(101.6x152.4) 4.00 x 6.00 inches / 101.6 x 152.4 mm

5"x7"(127.0x177.8) 5.00 x 7.00 inches / 127.0 x 177.8 mm

Wide 4 x 7.1(101x180) 4.00 x 7.10 inches / 101.6 x 180.6 mm

 Paper Handling

Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction. Also, do not use a cut paper or memo pad.

z Folded, curled, or wrinkled paper z Damp paper z Paper that is too thin (weighing less than 17 lb / 64 gsm) z Picture postcards z Postcards affixed with photos or stickers z Any type of paper with holes z Paper that is not rectangular z Paper bound with staples or glue z Paper with adhesives z Paper decorated with glitter, etc.

9Loading Printing Paper

Printing from a Memory Card

Using the Memory Card

This section describes the memory cards compatible with this printer, and how to insert and remove them.

 Memory Cards Supported by this Printer

The following memory cards are compatible with this printer.

Memory cards that can be directly inserted into the Card Slot: Memory cards that can be inserted in the Card Slot using the adapter:

SD Secure Digital memory card

SDHC memory card

MultiMediaCard

Compact Flash (CF) Card Supports Type I/II (3.3 V)

Microdrive

Important

If a memory card is inserted without an adapter, you may not be able to remove the card. Be sure to attach it to the adapter before inserting to the Card Slot.

miniSD Card

microSD Card

MEMORY STICK

MEMORY STICK PRO

Important

z If you shot or saved photos on a type of memory card that is not guaranteed operation

to be used on your digital camera, the image may be unreadable on this printer. Attempting to read such data on this printer may damage the data. For information on memory cards that your digital camera guarantees operation, refer to the manuals supplied with your digital camera.

z Format the memory card with a digital camera. The memory card may not be usable

with the printer if formatted on a computer.

z Do not insert more than one memory card at a time.

10 Printing from a Memory Card

xD-Picture Card

MEMORY STICK Duo

MEMORY STICK PRO Duo

RS-MMC

*1 Use the special adapter provided with the card.

Use “SD Card Adapter” provided with the card.

Requires purchase of a separate compact flash card adapter for xD-Picture

card.

 Printable Image Data

This printer supports JPEG and TIFF images created by DCF ver. 1.0/2.0 standard compliant digital cameras (Exif ver. 2.2/2.21 compliant).

Important

Compatible image types are limited to JPEG and TIFF only. Other image or movie types such as RAW images cannot be printed.

 Inserting the Memory Card

This printer is equipped with two Card Slots to meet various types of memory cards. Refer to the illustration on right column to find the Card Slot that corresponds to your memory card. Check the card face and insert it gently until it reaches the bottom and the Access lamp turns on. The card’s end protrudes from the Card Slot even if it is correctly set.

You can also use the Card Slot as the memory card drive of the computer.

Note

z When Read/write mode is selected in Read/write attribute under Device

settings by using the Operation Panel on the printer, card direct printing

cannot be done. After using the Card Slot as the memory card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Read-only mode. See “Changing the Printer Settings” on page 33.

z When you use a computer to edit or process photos saved on a memory card,

be sure to print them from the computer. If you print using the Operation Panel, the data may not be printed correctly.

1 Turn on the printer.

See “Turning On the Printer” on page 6.

2 Attach a card adapter if your memory card requires one.

Caution

When using miniSD Card, microSD Card, xD-Picture Card, MEMORY STICK Duo, MEMORY STICK PRO Duo, or RS-MMC, be sure to use a card adapter when inserting these cards into the Card Slot.

If one of these cards is inserted without an adapter, you may not be able to remove the card. In this case, see “Cannot Remove a Memory Card” on page 46.

3 Insert only one memory card into the Card Slot.

Caution

z When a memory card is inserted into the Card Slot, the Access lamp is lit.

When this Access lamp is flashing, the printer is accessing to the memory card. In this case, do not touch around the Card Slot.

z The memory card will stick out of the Card Slot, but do not force it into the slot

any further. Doing so damages the printer and the memory card.

z Make sure that the memory card is correctly oriented and labeled side is facing

up before inserting it into the Card Slot. If you force the memory card into the Card Slot in the wrong orientation, you may damage the memory card and/or the printer.

For SD Secure Digital memory card, SDHC memory card, miniSD Card, microSD Card, MultimediaCard, MEMORY STICK, MEMORY STICK PRO, MEMORY STICK Duo, MEMORY STICK PRO Duo, and RSMMC

Insert the memory card into the upper slot with the labeled side facing up.

For Compact Flash (CF) card, Microdrive, and xD-Picture Card

Insert the memory card into the downside slot with the labeled side facing up.

Lights up

4 Confirm that the Access lamp has lit up.

11Printing from a Memory Card

 Removing the Memory Card

Printing Photographs Saved on a Memory Card

Important

If you used the Card Slot as the memory card drive of the computer, you need to do a “safe removal” operation on your computer before physically removing the memory card from your printer.

Right-click the removable disk icon and click Eject. If Eject is not displayed on the screen, make sure that the Access lamp is not flashing, and then remove the memory card.

Drag the icon into the Trash.

1 Make sure that the Access lamp is lit, then remove the memory

card.

Do not remove the memory card while the Access lamp is flashing. Hold the part of the memory card that is sticking out to remove it from the printer.

Important

The Access lamp flashes while the printer is reading or writing data from/to the memory card. Removing the memory card or turning off the printer while the

Access lamp is flashing may damage the data saved on the memory card.

Access lamp

Photos saved on the memory card can be reviewed on the printer’s LCD. You can select a photo and print a single copy of the photo, or specify the number of copies to print.

 Selecting Photographs to Print—Select and print

You can display the photos saved on the memory card on the LCD and print them.

1 Prepare for printing.

(1) Turn on the printer.

See “Turning On/Off the Printer” on page 6.

(2) Load paper.

See “Loading Printing Paper” on page 8.

(3) Insert the memory card into the Card Slot.

See “Inserting the Memory Card” on page 11.

2 Select Select and print on the Home screen, then press the

OK button.

3 Confirm the page size, media type, and other settings, then select

Next, and then press the OK button.

The photo selection screen is displayed.

Note

z To change the settings, select the item and press the OK button.

See “Print Setting Screens” on page 15.

z may be displayed on the LCD while reading the photo.

12 Printing from a Memory Card

4 Select the photo to print and specify the number of copies for each

photo.

(1) Use the Easy-Scroll Wheel or the [ or ] button to display the photo to

print.

(2) Use the [+] or [-] button to specify the

number of copies.

(3) Repeat steps (1) and (2) to specify

the number of copies for each photo.

(4) Press the OK button.

The print confirmation screen is displayed.

Note

You can do…

z You can change the display for photos. See “Changing the Display—Change

display” on page 19.

z You can search for photos with the shooting date. See “Searching for Photos

with the Shooting Date—Search” on page 20.

z You can print a specified area. See “Printing a Specified Area—Trimming” on

page 19.

5 Start printing.

(1) Confirm the print settings.

Note

To change the print settings, select the item and press the OK button. See “Print Setting Screens” on page 15.

(2) Confirm the total number of copies for

the selected photos.

(3) Press the right Function button and

confirm the selected photos and number of copies for each photo. Then press the OK button to return to the print confirmation screen.

(4) Press the left Function button, and change the Advanced print settings.

See “Print Setting Screens” on page 15.

(5) Press the Print button.

The specified number of copies of each photo will be printed.

Note

z When the page size is Credit card:

Even if both Date ON and File no. ON are set, only the shooting date will be printed. If you want to print the file no., select Date OFF. It is not possible to print both the shooting date and the file no.

z To cancel printing, press the Stop/Reset button.

 Printing Multiple Photos on One Sheet of Media—Layout

You can print the specified photos in the specified layout (Borderless or Bordered ×2/×4/×8/Half, borderless/Half, bordered/Half, borderless (w/lines)/ Half, bordered (w/lines)/Album ×4 (photos on right)/Album ×4 (photos on left)).

Examples:

Borderless

×2

Bordered

×4

Borderless

×8

Half

bordered

Album ×4

1 Prepare for printing.

(1) Turn on the printer.

See “Turning On/Off the Printer” on page 6.

(2) Load paper.

See “Loading Printing Paper” on page 8.

(3) Insert the memory card into the Card Slot.

See “Inserting the Memory Card” on page 11.

2 Select Layout print on the Home screen, then press the OK

button.

13Printing from a Memory Card

3 Use the Easy-Scroll Wheel or the [ or ] button to select the

layout, then press the OK button.

Note

z Press the Back button to cancel pasting the specified photo. z Press the left Function button not to paste a photo in the selected frame. z You cannot paste photos on more than one page. Start printing once you have

pasted photos on one page.

You can do...

z You can search for photos with the shooting date. See “Searching for Photos

with the Shooting Date—Search” on page 20.

z You can print a specified area. See “Printing a Specified Area—Trimming” on

page 19.

4 Confirm the page size, media type, and print quality, then select

Next, and then press the OK button.

5 Select the paste method.

z Paste automatically

Select the Search or All photos on the following Layout print screen, and proceed to Step 7. All the photos are pasted automatically in the selected layout.

z Paste one by one

Specify to paste photos one by one on the specified layout. Proceed to Step 6.

6 Paste photos one by one.

(1) Use the Easy-Scroll Wheel or the [

or ] button to display the photo you want to paste and press the OK button. The photo is pasted on the layout.

(2) Repeat (1) for each photo you want to print.

(3) Confirm the layout and then press the OK button.

The print confirmation screen is displayed.

14 Printing from a Memory Card

7 Start printing.

(1) Confirm the print settings.

Note

To change the print settings, select the item and press the OK button. See “Print Setting Screens” on page 15.

(2) Use [+] [-] buttons to change the

number of copies.

(3) Press the left Function button, and

change the Advanced print settings. See “Print Setting Screens” on page

15.

(4) Press the Print button.

The specified number of copies will be printed.

Note

z Even if both Date ON and File no. ON are set, only the shooting date will be

printed. If you want to print the file no., select Date OFF. It is not possible to print both the shooting date and the file no.

z To cancel printing, press the Stop/Reset button.

Print Setting Screens

This section describes about the print setting screen and the print confirmation screen displayed during the operation to print photos on a memory card.

Note

When printing directly from a PictBridge compliant device, see “Setting Items” on page 24. When printing from a wireless communication, see “Setting Items” on page 25.

Print Setting Screen Print Confirmation Screen

Note

z For the print setting screen, select Next to proceed to the next step. z For the print confirmation screen, press the Print button to start printing. z The print settings are retained even if the printer is turned off.

 Advanced Print Settings Screen

When you press the left Function button in the print settings confirmation screen, the Auto image fix screen is displayed.

(1)

(2)

(3)

(4)

(1) Page size

Select the page size of the loaded paper.

(2) Media type

Select the media type of the loaded paper.

(3) Print quality

Adjust the print quality.

(4) Borderless print

Select bordered or borderless print.

(1)

(2)

(3)

(4)

 Print Settings

1 When the print setting screen or the print confirmation screen is

displayed, select the setting item, then press the OK button.

The setting screen for the selected item will be displayed.

2 Select the page size and the media type, then press the OK button.

When Auto image fix ON is selected, the scene or person’s face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print.

Note

z Photos in a memory card are printed in Auto image fix as default. In Auto image

fix, you can specify only Date or File no. on the next page.

z If you do not satisfy the print result in Auto image fix, you can select Manual

correction. If you select Manual correction, you can specify each advanced

setting item.

15Printing from a Memory Card

+ 41 hidden pages