Page 1
EN
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
INDEX
TECHNICAL DATA .......................................................................
page
38
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The manual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
OPENING THE LID – LOADING ................................................
DETERGENT DISPENSER ........................................................
SAFETY AQUABLOCK ................................................................
VARIABLE CAPACITY.................................................................
PROGRAMME SELECTION .......................................................
CONTROL DESCRIPTION
- LTO 86 B ................................................
- LTO 106 A - 126 A ...................................
TABLE OF PROGRAMMES
- LTO 86 B ................................................
- LTO 106 A - 126 A ...................................
39
40
41
41
41
42
45
48
50
When contacting a OTSEIN or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
36 37
Page 2
TECHNICAL DATA
LTO 86 B LTO 106 A
LTO 126 A
OPENING THE DRUM
Load capacity ..................................................
Voltage ...............................................................
Wash motor power rating ..................................
Spin motor power rating ....................................
Electropump power rating .................................
Heating element power rating ...........................
Max. power input ...............................................
Fuse ..................................................................
Water pressure..............................................
Spin speed ........................................
r.p.m./min
Water consumption (60º C programme)............
Energy consumption (60º C programme) .....
kg.
V.
W.
W.
W.
W.
W.
A.
MPa
lit.
kWh
Energy efficiency rating ..........................................
4,5
230
175
300
30
1.850
2.200
10
0,05 min.
0,8 max.
800
69
1,03
B
4,5
230
175
400
30
1.850
2.200
10
0,05 min.
0,8 max.
1000
59
0,85
A
4,5
230
125
340
30
1.850
2.200
10
0,05 min.
0,8 max.
1200
59
0,85
A
MACHINE LID
WASHING
1.
Lift the lid (A) and open completely. Next open the drum
A
door following these instructions:
2.
FRONT OF THE
WASHING
MACHINE
C
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
B
D
Place the washing in the drum.
4.
FRONT OF THE
WASHING
MACHINE
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
C
Ensure that both shutters are perfectly aligned and properly
closed.
D
FRONT OF THE
WASHING
MACHINE
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
C
D
FRONT OF THE
WASHING
MACHINE
C
D
38 39
2 min.
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
Page 3
DETERGENT DISPENSER
SAFETY AQUABLOCK
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is 60
gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 70 c.c.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 50 c.c.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
(Mod. LTO 126 A)
This appliance is fitted with a safety system (aquablock), which ensures
maximum freedom from anxiety for users. A water leak detector sensor
located along the inlet pipe and the devoce fitted to the tap, automatically
block the flow of water in the case of accidental leaks. Even without
electricity supply.
VARIABLE CAPACITY
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
MAXIMUM
(wash)
MAXIMUM
(prewash)
I
RECOMMENDED
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
II
• Select the wash temperature by means of the corresponding control knob.
• Select the spin speed by means of the corresponding control knob.
MAX.
MAX.
MAX.
MAXIMUM
(bleach and scenting agent)
40 41
• Select the different options available by pressing the corresponding buttons.
Page 4
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
LTO 86 B LTO 86 B
A
f
t
B
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control until
the line (L) coincides with the programme number or symbol.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
This displays the Approx. time remaining in minutes to the end of the
programme.
.
SPIN SPEED SELECTOR KNOB ...............................................
DELICATE WASH BUTTON .......................................................
FLOT BUTTON (ANTICREASING) ............................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
42 43
C
D
E
G
H
L
B
. TEMPERATURE SELECTOR KNOB
To select the desired wash temperature, turn this control until
the line (L) coincides with the desired temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
Page 5
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
To select the final spin speed, turn this control until the line
(L) coincides with the desired rpm.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the line mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. DELICATE WASH BUTTON
Pressing this button varies the number of turns of the drum in the pre-wash,
wash and rinse phases (programmes 9-10). This allows an extra-delicate wash,
especially suitable for wool and very delicate fabrics. Also indicated for mixed
fabrics, clothes only lightly soiled, and non-iron garments.
LTO 86 B
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
LTO 106 A
LTO 126 A
A
f
E
. FLOT BUTTON (Anticreasing)
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
When the button is pressed, the machine stops in the last rinse of these
programmes, leaving the wash soaking with a high water level.
To complete these programmes, spin the wash by pressing the button again to
release it.
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
SPIN SPEED SELECTOR KNOB ...............................................
SUPER RINSE BUTTON ............................................................
DELICATE WASH BUTTON .......................................................
FLOT BUTTON (ANTICREASING).............................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
t
B
C
D
E
F
G
H
L
44 45
Page 6
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
LTO 106 A
LTO 126 A
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
LTO 106 A
LTO 126 A
To select the desired wash programme, turn this control until
the line (L) coincides with the programme number or symbol.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
B
. TEMPERATURE SELECTOR KNOB
This displays the Approx. time remaining in minutes to the end of the
programme.
To select the desired wash temperature, turn this control until
the line (L) coincides with the desired temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
To select the final spin speed, turn this control until the line
(L) coincides with the desired rpm.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
.
D
. SUPER-RINSE BUTTON
Pressing this button removes the last vestiges of soap powder from the
fabrics, as the rinses are done with more water. Programmes 1-2-3-4.
E
. DELICATE WASH BUTTON
Pressing this button varies the number of turns of the drum in the pre-wash,
wash and rinse phases (programmes 9-10). This allows an extra-delicate wash,
especially suitable for wool and very delicate fabrics. Also indicated for mixed
fabrics, clothes only lightly soiled, and non-iron garments.
F
. FLOT BUTTON (Anticreasing)
The Flot button only works in programmes (5-6-7-8-9-10) for mixed, synthetic
and very delicate fabrics.
When the button is pressed, the machine stops in the last rinse of these
programmes, leaving the wash soaking with a high water level.
To complete these programmes, spin the wash by pressing the button again to
release it.
G
. ON/OFF PILOT LIGHT
the selector mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
46
H
. ON/OFF BUTTON
47
Page 7
TABLE OF PROGRAMMES
TYPE OF FABRIC
Sheets, white & fast coloured tablecloths, serviettes,
Cotton, linen
Sheets, white & fast coloured tablecloths, serviettes,
Cotton, fast blends
Cotton, blends
NORMAL FABRICS
Cotton
Cotton, linen
Fast blends
Medium soiled coloured clothes
Shirts, sheets, baby clothes, whites
PROGRAMME FOR
WHITE (PRE-WASH)
lingerie
SOILED WHITE
lingerie
FAST COLOURS
FAST WASH PROGRAMME
Non fast colours, jeans
BLEACH/ WHITENING
Organic stains
VIGOROUS RINSE
VIGOROUS SPIN
FAST BLENDS
MAX.
LOAD
IN kg.
4,5
4,5
3,5
3,5
—
—
—
2
PROG.
SEL.
1
2
*
3
4
5
MOD. LTO 86 B
WASHING POWDER
MAX.
TEMP.
SEL.
ºC
From cold
to…
90º
From cold
to…
90º
From cold
to…
60º
From cold
to…
40º
—
—
—
From cold
to…
60º
LOAD
I
II
•
•
•
•
•
•
•
•
•
•
As a
PROG.
SEL.
•
•
•
•
•
•
•
1
PRE-WASH, Main wash, 4 rinses, final vigorous spin.
Main wash, 4 rinses, final vigorous spin
2
Short wash, 4 rinses, final vigorous spin
3
FAST WASH PROGRAMME. Short wash, 4 rinses,
4
final vigorous spin
Bleach in pre-wash
4 rinses. Final vigorous spin
Vigorous spin
5
PRE-WASH, Wash, 3 rinses, final gentle spin.
PROGRAMME STEPS
guideline
Prog.
Time in
min.
152´
128´
90´
74´
47´
42´
8´
97´
NOTES:
1. For highly soiled clothes, it is advisable to
reduce the load to no more than 3 kg.
2. Programmes 1-5-9 have pre-wash.
3. For automatic whitening in programmes 1
and 2, pour bleach into the bleach
drawer .
4. The washing machine is designed to
incorporate fabric softener automatically in
the last rinse of each washing cycle.
5. Programme duration is given AS A
GUIDELINE ONLY. This time may vary either
way depending on the temperature selected,
the amount and type of clothes and the
installation conditions (water temperature,
ambient temperature, mains water pressure,
etc.)
Synthetics
(Rayon, acrylics)
synthetics
Blends, synthetics,
SYNTHETIC FABRICS
delicate items
Clothes requiring
Synthetics
(Rayon, acrylics)
Synthetics,
HIGHLY DELICATE
FABRICS
Delicate items
Delicate
no spin
Wool
Blends,
FAST SYNTHETICS
Shirts, blouses, fast coloured skirts
MIXED SYNTHETIC
Lightly soiled clothes of all types
FAST WASH PROGRAMME
DELICATE RINSE
GENTLE SPIN
EMPTYING
Emptying only
DELICATE SYNTHETICS
Curtains, skirts, blouses, shirts
WOOL
(“Machine washable”)
DELICATE RINSE
GENTLE SPIN
1,5
2
6
From cold
*
to…
60º
2
7
From cold
to…
50º
8
Z
9
10
*
From cold
to…
40º
—
—
—
From cold
to…
40º
From cold
to…
40º
—
—
2
—
—
1
—
—
•
•
•
•
•
•
Programme *, as per EN standard 60456.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
•
•
•
•
•
•
•
6
Wash, 3 rinses, final gentle spin
7
Wash, 3 rinses, final gentle spin
FAST WASH PROGRAMME. Short wash, 3 rinses,
8
final gentle spin
3 rinses. Final gentle spin
Rinse. Final gentle spin
Emptying (e.g. after stopping with water in drum)
Z
9
PRE-WASH. Short wash with abundant water, 3
rinses, gentle spin.
Short wash with abundant water, 3 rinses, gentle spin
10
3 rinses, gentle spin
Gentle spin
76´
68´
60´
31´
14´
4´
42´
31´
21´
4´
48
49
Page 8
TABLE OF PROGRAMMES
TYPE OF FABRIC
FAST WASH PROGRAMME
Sheets, white & fast coloured tablecloths, serviettes,
Cotton, linen
Cotton, fast blends
Cotton, blends
NORMAL FABRICS
Cotton
Cotton, linen
Fast blends
Synthetics
(Rayon, acrylics)
NORMALLY SOILED CLOTHES
Sheets, white & fast coloured tablecloths, serviettes,
Shirts, sheets, baby clothes, whites
NORMALLY SOILED CLOTHES
Shirts, blouses, fast coloured skirts
PROGRAMME FOR
Super-fast 34 minute cycle
HEAVILY SOILED CLOTHES
lingerie
lingerie
FAST COLOURS
Medium soiled coloured clothes
DELICATE COLOURS
Non fast colours, jeans
BLEACH/ WHITENING
Organic stains
VIGOROUS RINSE
VIGOROUS SPIN
HEAVILY SOILED CLOTHES
MOD. LTO 106 A - 126 A
WASHING POWDER
PROG.
SEL.
1
*
2
3
4
5
*
6
MAX.
TEMP.
SEL.
ºC
From cold
to…
50º
From cold
to…
90º
From cold
to…
60º
From cold
to…
50º
From cold
to…
40º
—
—
—
From cold
to…
60º
From cold
to…
50º
LOAD
I
II
•
•
•
•
•
•
•
•
•
•
MAX.
LOAD
IN kg.
2
4,5
4,5
3,5
3,5
—
—
—
2
2
As a
PROG.
SEL.
Short wash, rinse, gentle spin
•
1
Main wash, 3 rinses, final vigorous spin.
PROGRAMME STEPS
guideline
Prog.
Time in
min.
34´
118´
*
•
•
•
•
Main wash, 3 rinses, final vigorous spin
2
Short wash, 3 rinses, final vigorous spin
3
Short wash, 3 rinses with, final vigorous spin
4
Bleach in pre-wash
87´
73´
70´
40´
NOTES:
1. For highly soiled clothes, it is advisable to
reduce the load to no more than 3 kg.
2. For automatic whitening in programmes 1
and 2, pour bleach into the bleach
drawer .
3. The washing machine is designed to
incorporate fabric softener automatically in
the last rinse of each washing cycle.
4. Programme duration is given AS A
GUIDELINE ONLY. This time may vary either
way depending on the temperature selected,
the amount and type of clothes and the
installation conditions (water temperature,
ambient temperature, mains water pressure,
etc.)
34-MINUTE FAST PROGRAMME
This programme completes a full wash
•
•
3 rinses. Final vigorous spin
Vigorous spin
5
Wash, 3 rinses, final gentle spin.
32´
13´
77´
*
•
6
Wash, 3 rinses, final gentle spin
68´
cycle in 34 minutes for up to 2 kg of
clothes at 50ºC. Wash temperature can
be lowered via the temperature selector.
Pour washing powder into the pre-wash
compartment (compartment 1)
This programme can also be used as a
pre-wash for especially heavily soiled
washes, prior to selecting the desired
main programme.
2
Blends, synthetics,
SYNTHETIC FABRICS
delicate items
Clothes requiring
Synthetics
(Rayon, acrylics)
Synthetics,
HIGHLY DELICATE
FABRICS
Delicate items
Delicate
synthetics
no spin
Wool
Blends,
DELICATE COLOURS
Lightly soiled clothes of all types
LIGHTLY SOILED CLOTHES
DELICATE RINSE
GENTLE SPIN
EMPTYING
Emptying only
WOOL
(“Machine washable”)
DELICATE SYNTHETICS
Curtains, skirts, blouses, shirts
DELICATE RINSE
GENTLE SPIN
1,5
7
From cold
to…
40º
9
*
10
8
Z
From cold
to…
30º
—
—
—
From cold
to…
40º
From cold
to…
30º
—
—
2
—
—
1
—
—
•
•
•
•
Programme *, as per EN standard 60456.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
50 51
•
•
•
•
•
•
7
Wash, 3 rinses, final gentle spin
Short wash, 3 rinses, final gentle spin
8
3 rinses. Final gentle spin
Rinse. Final gentle spin
Emptying (e.g. after stopping with water in drum)
Z
9
Short wash with abundant water, 3 rinses, gentle
spin.
*
Short wash with abundant water, 3 rinses, gentle spin
10
3 rinses, gentle spin
Gentle spin
62´
55´
28´
11´
2´
61´
53´
25´
10´
Loading...