These warnings have been drawn up to ensure the safety of the user and others.
Please read this instruction booklet carefully before installation and using the appliance,
and always keep it together with the appliance for future reference.
zDisconnect the main plug before carrying out any cleaning or maintenance operations
(e.g. lamp replacement on relevant models).
This appliance has been designed to be used exclusively by adults.
Ensure that children do not play near or with the appliance. Never allow children to sit
on the drawers or hang on the appliance doors.
A qualified technician must carry out all modifications to the electrical mains to enable
appliance installation.
Do not put your fingers near the hinge which would be wounded to your fingers.
z On completion of installation, check that the appliance is not standing on the power
cable.
z The appliance should be left for 2 hours after installation before it is turned on, in
order to allow the refrigerant to settle.
zThis appliance is designed for domestic use only, specifically for the storage of edible
foodstuffs only.
zDuring the normal operation, the condenser and compressor located at the rear of the
appliance can reach higher temperatures; ensure that installation is carried out
according to the instructions in this booklet. Insufficient ventilation will impair
operation and damage the appliance. Never cover or obstruct the ventilation slats on
the appliance.
z Never use the base, drawers, doors etc. to stand on or as supports.
z Never transport the appliance in a horizontal position, because the oil in the
compressor may flow into the refrigerant circuit.
z All refrigerators and freezers have surfaces those are subject to frosting. Depending
on the model, this frost can be removed automatically (automatic defrosting) or
manually when necessary. Never attempt to re move frost with sharp objects as this
may damage the evaporator and impair the efficiency of this appliance. Let the frost
thaw naturally; never use hot water.
z Never put sparking drinks or bottles of water in the lower temperature compartments
(freezer/cooler).
zWe strongly advise against putting hot liquid or food in the refrigerator or filling with
the ridded containers.
z Never attempt to repair the appliance alone. Repairs carried out by unqualified
persons can cause serious damage; always contact the nearest service center and
use original spare parts only.
z Never carry out any modifications to your appliance.
z The refrige rant and insulation in this appliance do not contain any harmful gases to
the ozone or which contribute to the greenhouse effect. However, disposal must be
carried out in compliance with the relative standards regarding protection of the
environment.
3
zUnits are supplied with isobutene (R600a). In any case the label inside the unit shows
the type of refrigerant used. All units must be transported and installed with the
utmost care since any exclusive knocking or shaking could damage the refrigerating
circuit.
z Failure to comply with the above mentioned requirement might result in the unit not
being able to function with either R134a or R600a. Further more, in the presence of
R600a, any damage to the refrigerating circuit could lead to the risk of explosion
caused by outside sparks or flames.
In the event of damage, contact the nearest service center, ventilate the room where
the machine is located and avoid exposure to flames or any repair work on the unit.
Caution do not use electrical equipment inside the food storage compartment.
z A transparent polythene film protects the side panels and door on the appliance. This
film must be removed prior to installation. The film guarantees intact finished surfaces
of the appliance and prevents scratches or other damages during transport. Simply
remove by hand and dispose of as recyclable plastic material.
INSTALLATION
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight
etc. Maximum performance and safety are guaranteed by maintaining the correct indoor
temperature for the class of unit concerned, as specified on the rating plate.
Climate classification Ambient temperature
SN
N
ST
T 16~43℃
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the
lower rear section of appliances, as poor air circulation can affect performance. Built-in
appliances should be positioned away from heat sources such as heaters and direct
sunlight.
Electrical connection
Before connecting the appliance to the power supply, ensure that the voltage
frequency as indicated on the data plate correspond to those of the electrical mains.
A deviation of –6V to +6V is admissible with respect to the rated voltage. For operation
with other voltage supplies, a right autotransformer is required.
Always connect the appliance to an useful earthing system
For the above, if the main supply is not earthed, connect the appliance to a separate
earthing system. Consult a specialized technician to carry out the latter in compliance with
current standards.
The manufacturer declines all responsibility for failure to observe the above accident
prevention standards.
10~32℃
16~32℃
16~38℃
and
4
Cleaning the interior prior to use
Prior to use, clean all internal parts with warm water and neutral detergent to remove the
“new” odor and dry thoroughly. Never use abrasive detergents and/or powders that can
damage the appliance.
Installation instructions:
Before installing, carefully read the instruction in order to avoid a certain number of
problems.
Fig 2 -Dimensions of mounting slot
Fig 3 -Height regulation
Fig 4 -Installation of the appliance under the worktop
Fig 5 -Fastening the appliance under the worktop
Fig 6 -Door exchange
Fig 7, Fig 8 –Mounting the kitchen cabinet door
5
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.