Candy CFO 140 User Manual

BEFORE USING THE APPLIANCE

. Your new appliance is designed exclusively
for domestic use.

To ensure best use of your appliance,
carefully read the operating instruct­ions which contain a description of
the appliance and advice on storing
and preserving food.
Keep this handbook for future reference.

1. After unpacking the appliance, make sure
it is not damaged and that the door closes
properly. Any damage must be reported to
the dealer within 24 hours of delivery of
the appliance.

2. Wait at least two hours before switching the
appliance on, in order to ensure that the
refrigerant circuit is fully efficient.

3. Make sure installation and the electrical
connection are carried out by a qualified
technician according to the manufacturer's
instructions and in compliance with the local
safety regulations.

4. Clean the inside of the appliance before
using it.

BEFORE USING THE APPLIANCE

1. Packing

The packing material is 100% recyclable and
bears the recycling symbol. Comply with the
local regulations for disposal. Keep the
packing materials (plastic bags, polystyrene
parts, etc.) out of the reach of children, as
they are a potential source of danger.

2. Scrapping/Disposal

The appliance is manufactured using
recyclable material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring the correct scrapping of this appli­ance, you can help prevent potentially negative
consequences for the environment and the
health of persons.
The symbol on the appliance, or on the acc­ompanying documents, indicates that this
appliance should not be treated as domestic
waste but must be taken to a suitable collec­tion centre for the recycling of electrical and
electronic equipment.When scrapping the
appliance, make it unusable by cutting off the
power cable and removing the doors and shel­ves so that children cannot easily climb inside.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a
special collection centre; do not leave the app­liance unattended even for a few days, since it
is a potential source of danger for children. For
further information on the treatment, recovery
and recycling of this appliance, contact your
competent local office, the household waste
collection service or the shop where you pur­chased the appliance.

Information:

This appliance does not contain CFC (the
refrigerant circuit contains R134a) or HFC
(the refrigerant circuit contains R600a)
(refer to the rating plate inside the
appliance).
Appliances with isobutane (R600a):
Isobutane is a natural gas without environ­mental impact but is flammable. Therefore,
make sure the refrigerant circuit pipes are
not damaged.

Declaration of conformity

. This appliance is intended for storing food
and is manufactured in conformity with
European regulation (EC) No. 1935/2004.

. This product has been designed, manufact­ ured and marketed in compliance with:

- the safety objectives of Low Voltage
Directive 73/23/EEC;

- the protection requirements of EMC
Directive 89/336/EEC, amended by Directive
93/68/EEC.
. Electrical safety of the appliance is guaran­ teed only if it is connected to an efficient
and approved earthing system.

1

IMPORTANT SAFETY INSTRUCTIONS

These warnings are provided in the interests of your safety. Ensure that you understand

Them

all before installing or using this appliance. Your safety is of paramount importance.

If you are

Care Department.

unsure about any of the meanings or these warnings contact the Customer

Installation

This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on
the electrical supply cable. If the supply cord is
damaged, it must be replaced by a special
cord available from your local Service Force
Centre.

Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall but leaving the
required distance for ventilation as stated in
the installation instructions.

The appliance should be left for 2 hours after
installation before it is turned on, in order to
allow the refrigerant to settle.

CAUTION: You must keep the appliance

stand in the place where is ventilative anytime.

Child Safety

This appliance is not intended for use by young
children or infirm persons unless they have
been adequately supervised by a responsible
person to ensure that they can use the appliance
safely.
Yong children should be supervised to ensure
that they do not play with the appliance.

During Use

This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs only.
Frozen food should not be refrozen o nce it has
thawed out.
Do not place carbonated or fizzy drinks in the
freezer.
Ice lollies can cause 'frost/freezer burns' if
consumed straight from the freezer.
Do not remove items from the freezer if your
hands are damp/wet, as this could cause
skin abrasions or frost/freezer burns.

Maintenance and Cleaning

Switch off, and unplug the appliance before
carrying out any cleaning or maintenance
work.

Do not use sharp instruments to scrape
off frost or ice. (See defrosting instructions).

CAUTION: You must not use any mechanical

equipment or other way that quicken up the
defrosting process to defrost the appliance.

Do not damage the refrigerant circuit.

You must not use any electric appliance inside
the appliance except that are commended by
the manufacturer.

Servicing

This product should be serviced by an
authorised engineer, and only genuine s pare
parts should be used.

Under no circumstances should you a ttempt to
repair the machine yourself. Repairs carried
out by inexperienced persons may cause injury
or serious malfunctioning. Contact your lo cal
Service Force Centre.

At the End of the Appliance Life

NOTE: Before discarding an old wine

cooler, switch off and disconnect it from the
power supply. Cut off and render any plug
useless. Ensure that the door cannot jam
(removing it is best), regardless of whether
or not it can be pushed open from inside.

AN OLD WINE COOLER CAN BE A DEADLY
PLAYTHING FOR CHILDREN!

CAUTION: At the end of the function life of

the appliance it must be disposed in accordance
with the W.E.E.E directive (See below). You
appliance contains R600a refrigerant and
inflammable gas in the insulating foam.

Before discarding your wine cooler, switch it off and
disconnect it from the power supply. Cut off and
render any plug useless.
Ensure that the door cannot shut completely,
regardless of whether or not it can be pushed
open from the inside (removing the door is best).

Please read this

instruction book carefully

before use and retain

for future reference.

2

Negative temperature compartment door

Negative temperature compartment

2.Correctly positioning

10%

50Hz

60Hz

Well Ventilating

There is need of good ventilation around the refrigerator for easy
dissipation of heat, high efficiency of refrigeration and low power
consumption. For this purpose, sufficient clear space should be
need around the refrigerator. Its back is at least 100mm away from
the wall, its sides at least have a space of 100mm separately and
the height from over its top is not less than 200mm. A clear space
should be left to open its doors to 160

Power Supply

The refrigerator is only applied with power supply of single phase
alternating current of (220-240)V~/50Hz;230V~/60Hz.If fluctuation
of voltage in the district user is of so large that the voltage
exceeds the above scope, for safety sake, be sure to apply a.c.
automatic voltage regulator to the refrigerator. The refrigerator
must employ a special power socket instead of common one with
other electric appliances. Its plug must match the socket with
ground wire.

(+220-240)V~

230V~

_

+
50Hz

60Hz

10%

10%

Power Line Cord

The cord should be neither lengthened nor folded into
coil during operation. Moreover, it is forbidden that cord
is kept close onto the compressor at the back of the
refrigerator, the surface temperature of which is quite
high when operating. Touching with it would deactivate
the insulation or cause leakage for electricity.

Protection from Moisture

Avoiding placing the refrigerator in a place where heavy
moisture is present so as to minimize possibility of rusty
for its metal parts. Still more, the refrigerator is forbidden to
be directly sprayed by water, otherwise, poor insulation and
current leakage would occur.

4

N

2.Correctly Positioning

Protection from Heat

The refrigerator should be far away from any heat
source or direct sunshine.

Fixing Stable

Floor on which refrigerator will be placed must be flat
and solid. It should not be laid on any soft material such as
foam plastic, etc. If the refrigerator is not on the same level,
adjust the screws suitably. The refrigerator should not be
placed near anything which may echo.

Keep Away from Danger

It is inadvisable that the refrigerator is placed near
any volatilizable or combustible such as gas, petrol,
alcohol, lacquer and banana oil, etc. The above-mentioned
objects can not be stored in the refrigerator.

Moving

When fixed or moved, the refrigerator can not be
set horizontally or declined to more than 45 or
upside-down.

5

3.Cautions

Water contained in food or getting into air inside the refrigerator by opening doors
may form a layer of frost inside, It will weaken the refrigerator when the frost is thick,
while it is more than 2mm thick, you should defrost.

Defrosting in freezer chamber is operated manually. Before defrosting, take the food,
the ice tray and the shelf out into the cold storing chamber temporarily then set the
knob of the temperature regulator to position"0"(where the compressor will stop working)
and leave the door open until ice and frost dissolve thoroughly deposited at the bottom
of the freezer chamber, wipe off the water with soft cloth.,In the case of speeding up the
defrosting, you may put a bowl of warm water (about 50 C )into the freezer chamber, and
be sure to set the knob of the temperature regulator to original position after defrosting.

It's inadvisable to heat the freezer chamber directly with hot water or hair dryer while
defrosting to prevent deformation of the inner case.

It's also inadvisable to scrape of ice and frost or separate food from the containers
which have been congealed together with the food with sharp tool or wooden bars,
so as not to damage the inner casing or the surface of the evaporator.

If the supply cord of this appliance is damaged, it must only be replaced by a repair
shop appointed by the manufacturer, because special purpose tools are required.

6

4.Changing the reversible door

7

8