Candy CCGMEE9025PXE1, CCGM9025PX1 User Manual

FREE STANDING OVEN

90x60

Gas and electrical oven Plynová a elektrická trouba

H10-20-180-201 Rev 006

USER MANUAL GB

NÁVOD K POUŽITÍ CZ

GB

Dear user,

Our objective is to make this product provide you with the best output which is manufactured in our modern facilities in a careful working environment, in compliance with total quality concept.

Therefore, we suggest you to read the user manual carefully before using the product and, keep it permanently at your disposal.

Note: This user manual is prepared for more than one model. Some of the features specified in the manual may not be available in your appliance.

All our appliances are only for domestic use, not for commercial use.

Products marked with (*) are optional.

“THIS APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH THE REGULATIONS FORCE AND ONLY USED IN A WELL VENTILATED SPACE. READ THE INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE”

“Conforms with the WEEE Regulations."

2

Contents
Important warnings	4
Electrical connection	16
Gas connection	17
Introduction of the appliance	22
Accessories	23
Technical features of your oven	24
Installation of your oven	27
Installation of the oven feet	29
Chain lashing illustration	29
Control panel	30
Using oven section	31
Using the grill	32
Using the chicken roasting	32
Using cooker section	33
Program types	35
Cooking time table	36
Maintenance and cleaning	37
Installation of the oven door	38
Cleaning and maintenance of the oven’s front door glass	39
Catalytic walls	39
Rack positions	39
Changing the oven lamp	40
Using the grill deflector sheet	41
Troubleshooting	42
Handling rules	44
Recommendations for energy saving	44
Environmentally-friendly disposal	45
Package information	45

3

GB

IMPORTANT WARNINGS

1.Installation and repair should always be performed by “AUTHORIZED SERVICE”. Manufacturer shall not be held responsible for operations performed by unauthorized persons.

2.Please read this operating instructions carefully. Only by this way you can use the appliance safely and in a correct manner.

3.The oven should be used according to operating instructions.

4.Keep children below the age of 8 and pets away when operating.

5.WARNING: The accessible parts may be hot while using the grill. Keep away from children.

6.WARNING: Fire hazard; do not store the materials on the cooking surface.

7.WARNING: The appliance and its accessible parts are hot during operation.

8.Setting conditions of this device are specified on the label. (Or on the data plate)

9.The accessible parts may be hot when the grill is used. Small children should be kept away.

10.WARNING: This appliance is intended for cooking. It should not be used for other purposes like heating a room.

11.To clean the appliance, do not use steam cleaners.

12.Ensure that the oven door is completely closed

after putting food inside the oven.

4

13.NEVER try to put out the fire with water. Only shut down the device circuit and then cover the flame with a cover or a fire blanket.

14.Children under 8 years of age should be kept away, if they cannot be monitored continuously.

15.Touching the heating elements should be avoided.

16.CAUTION: Cooking process shall be supervised. Cooking process shall always be supervised.

17.This device can be used by children over 8 years of age, people with physical, hearing or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the dangers.

18.This device has been designed for household use

only.

19.Children must not play with the appliance. Cleaning or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.

20.Keep the appliance and its power cord away from children less than 8 years old.

21.Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or flammable materials on or in the appliance.

22.Keep the ventilation channels open.

5

GB

23.The appliance is not suitable for use with an external timer or a separate remote control system.

24.Do not heat closed cans and glass jars. The pressure may lead jars to explode.

25.Oven handle is not a towel drier. Do not hang towels, etc. on the oven handle.

26.Do not place the oven trays, plates or aluminium foils directly on the oven base. The accumulated heat may damage the base of the oven.

27.While placing food to or removing food from the oven, etc., always use heat resistant oven gloves.

28.Do not use the product in states like medicated and/or under influence of alcohol which may affect your ability of judgement.

29.Be careful when using alcohol in your foods. Alcohol will evaporate at high temperatures and may catch fire to cause a fire if it comes in contact with hot surfaces.

30.After each use, check if the unit is turned off.

31.If the appliance is faulty or has a visible damage, do not operate the appliance.

32.Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.

33.Do not use the appliance with its front door glass removed or broken.

34.Place the baking paper together with the food into a pre-heated oven by putting it inside a cooker or on an oven accessory (tray, wire grill etc.).

6

35.Do not put objects that children may reach on the appliance.

36.It is important to place the wire grill and tray properly on the wire racks and/or correctly place the tray on the rack. Place the grill or tray between two rails and make sure it is balanced before putting food on it.

37.Against the risk of touching the oven heater elements, remove excess parts of the baking paper that hang over from the accessory or container.

38.Never use it at higher oven temperatures than the maximum usage temperature indicated on your baking paper. Do not place the baking paper on the base of the oven.

39.When the door is open, do not place any heavy object on the door or allow children to sit on it. You may cause the oven to overturn or the door hinges to be damaged.

40.The packaging materials are dangerous for children. Keep packaging materials away from the reach of children.

41.Do not use abrasive cleaners or sharp metal scrapers to clean the glass as the scratches that may occur on the surface of the door glass may cause the glass to break.

42.Do not place the appliance on a surface covered with carpets. Electric parts gets overheated since there will be no ventilation from below. This will cause failure of the appliance.

7

GB

43.Do not hit glass surfaces of vitro-ceramic cookers with a hard metal, resistance can get damaged. It may cause an electric shock.

44.User should not handle the oven by himself.

45.Use shall be careful when cleaning gas burners. It may cause personal injuries.

46.Food can spill when foot of oven is dismantled or gets broken, be careful. It may cause personal injuries.

47.During usage, the internal and external surfaces of the oven get hot. As you open the oven door, step back to avoid the hot vapour coming out from the interior. There is risk of burning.

48.Upper cover of the oven can be closed for a reason, than cookware can trip over. Step back to avoid the hot food coming on you. There is risk of burning.

49.Do not place heavy objects when oven door is open, risk of toppling.

50.User should not dislocate the resistance during cleaning. It may cause an electric shock.

51.Do not remove ignition switches from the appliance. Otherwise, live electric cables can be accessed. It may cause an electric shock.

52.Oven supply can be disconnected during any construction work at home. After completing the work, re-connecting the oven shall be done by authorized service.

53.Do not place metal utensils such as knife, fork, spoon on the surface of the appliance, since they will get hot.

8

54.To prevent overheating, the appliance should not be installed behind of a decorative cover.

55.Turn off the appliance before removing the safeguards. After cleaning, install the safeguards according to instructions.

56.Cable fixing point shall be protected.

57.WARNING: Don’t use oven and grill burners at same

time.

58.Please don’t cook the food directly on the tray / grid. Please put the food into or on appropriate tools before putting them in the oven.

59.Hot surface, leave for cooling before closing the cover.

9

GB

Electrical Safety

1.Plug the appliance in a grounded socket protected by a fuse conforming to the values specified in the technical specifications chart.

2.Have an authorized electrician set grounding equipment. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations.

3.The circuit breaker switches of the oven shall be placed so that end user can reach them when the oven is installed.

4.The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.

5.If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the manufacturer or its service agent or an equally qualified personnel to prevent a hazardous situation.

6.Never wash the product by spraying or pouring water on it! There is a risk of electrocution.

7.WARNING: To avoid electric shock, ensure that the device circuit is open before changing the lamp.

8.WARNING: Cut off all supply circuit connections before accessing the terminals.

9.WARNING: If the surface is cracked, turn off the appliance to avoid risk of electric shock.

10.Do not use cut or damaged cords or extension cords other than the original cord.

10

11.Make sure that there is no liquid or humidity in the outlet where the product plug is installed.

12.The rear surface of the oven also heats up when the oven is operated. Electrical connections shall not touch the rear surface, otherwise the connections may be damaged.

13.Do not tighten the connecting cables to the oven door and do not run them over hot surfaces. If the cord melts, this may cause the oven to short circuit and even a fire.

14.Unplug the unit during installation, maintenance, cleaning and repair.

15.If the power supply cable is damaged, it must be replaced by its manufacturer or authorized technical service or any other personnel qualified at the same level, in order to avoid any dangerous situation.

16.Make sure the plug is inserted firmly into wall socket to avoid sparks.

17.Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.

18.An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power supply shall be provided with a switch or an integrated fuse installed on fixed power supply according to building code.

19.Appliance is equipped with a type ‘’Y’’ cord cable.

11

GB

20. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with over voltage category below III, disconnection device shall be connected to fixed power supply according to wiring code.

Gas Safety

1.This appliance is not connected to burning products evacuation apparatus.This appliance must be connected and installed according to the installation regulations in force. Conditions regarding ventilation must be considered.

2.When a gas cooking appliance is used; humidity, heat and burning products are generated in the room. First of all, make sure the kitchen is well ventilated when operating the appliance and maintain natural ventilation openings or install a mechanical ventilation equipment.

3.After using the appliance heavily for en extended period of time, additional ventilation may be required. For example open a window or adjust a higher speed for mechanical ventilation, if any.

4.This appliance must be used only in well ventilated locations in accordance with the regulations in force. Please read the manual before installing or using this product.

5.Before positioning the appliance, make sure local network conditions (gas type and gas pressure) meets appliance requirements.

12

6.The mechanism cannot be run for longer than 15 seconds. If the burner is not on after 15 seconds, stop the mechanism and wait for at least one minute before trying to ignite the burner again.

7.All kinds of operations to be performed on gas installation must be performed by authorized and competent people.

8.This appliance is adjusted for natural gas (NG). If you have to use your product with a different gas type, you have to apply to authorized service for the conversion.

9.For proper operation, hood, gas pipe and clamp should be replaced periodically accordint to manufacturer recommendations and when required.

10.Gas should burn well in gas products. Well burning gas can be understood from blue flame and continuous burning. If gas does not burn sufficiently, carbon monoxide (CO) can be generated. Carbon monoxide is a colourless, odourless and very toxic gas; even small amounts have lethal effect.

11.Ask your local gas supplies about the phone numbers for emergencies related to gas and the measures to be taken upon gas odour is detected.

13

GB

What To Do When Gas Odour Is Detected

1.Do not use naked flame, and do not smoke.

2.Do not operate any electrical switch.

(For example: lamp switch or doorbell)

3.Do not use telephone or mobile phone.

4.Open the doors and windows.

5.Close all valves on the appliances that utilize gas and the gas counters.

6.Call fire brigade from a telephone outside the home.

7.Check all hoses and their connections against leaks. If you still smell gas, leave the house and warn your neighbours.

8.Do not enter into the house until authorities clarify it is safe.

14

Intended Use

1.This product is designed for home use. Commercial use of the appliance is not permitted.

2.This appliance may only be used for cooking purposes. It shall not be used for other purposes like heating a room.

3.This appliance shall not be used to heat plates under the grill, drying clothes or towels by hanging them on the handle or for heating purposes.

4.The manufacturer assumes no responsibility for any damage due to misuse or mishandling.

5.Oven part of the unit may be used for thawing, roasting, frying and grilling food.

6.Operational life of the product you have purchased is 10 years. This is the period for which the spare parts required for the operation of this product as defined is provided by the manufacturer.

15

GB

Electrical Connection

1.Your oven requires 16 or 32 Ampere fuse according to the appliance’s power. If necessary, installation by a qualified electrician is recommended.

2.Your oven is adjusted in compliance with 220-240V AC/380-415V

AC 50/60Hz.electric supply. If the mains are different from this specified value, contact your authorized service.

3.Electrical connection of the oven should only be made by the sockets with earth system installed in compliance with the regulations. If there is no proper socket with earth system in the place where the oven will be placed, immediately contact a qualfied electrician. Manufacturer shall never be responsible from the damages that will arise because of the sockets connected to the appliance with no earth system. If the ends of the electrical connection cable are open, according to the appliance type, make a proper switch installed in the mains by which all ends can be disconnected in case of connecting / disconnecting from / to the mains.

4.If your electric supply cable gets defective, it should definitely be replaced by the authorized service or qualfied electricians in order to avoid from the dangers.

5.Electrical cable should not touch the hot parts of the appliance.

6.Please operate your oven in dry atmosphere.

Electrical connection scheme

220--240V~50/60Hz 38400V-415V3N~50/60/60Hz 38400-V415V2N~50/60H50/60Hz 220-240V~50/60Hz

	Neutral	L3	Neutral	L2	Neutral	L1	Neutral
Live	Neutre	L2	Neutre		Neutre
	Earth		Earth	L1	Earth		Neutre
Phase		L1					Earth
	Terre		Terre		Terre		Terre
	Erdung		Erdung		Erdung
							Erdung
H05 VV--FF3G3G4 4mm²		H05 VV--FF5G1.15.5mm² HH05VV-VF-F4G 1.5mm²²				H05H05VVVV-F-F3G1.5mmm²

16

Gas Connection

WARNING: Before starting any work related with gas installation, turn off gas supply. Risk of explosion.

Please operate your oven in dry atmosphere.

1.Fit the clamp to the hose. Push one of the hose until it goes to the end of the pipe.

2.For the sealing control; ensure that the buttons in the control panel are closed, but the gas cylinder is open. Apply some soap bubbles to the connection. If there is gas leakage, there will be foaming in the soaped area.

3.The oven should be using a well ventilation place and should be install on flat ground.

4.Re-inspect the gas connection.

5.When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by adjusting the feet if necessary.

6.Do not make gas hose and electrical cable of your oven go through theheated areas, especially through the rear side of the oven. Do not move gas connected oven. Since the forcing shall loosen the hose, gas leakage may occur.

7.Please use flexible hose for gas connection.

For LPG connection;

Main Gas Pipe

Gasket

Hose Inlet Connector

Metal Clamp

Lpg Connection Hose

1. For LPG (cylinder) connection, affix metal clamp on the hose coming from LPG cylinder. Affix an edge of the hose on hose inlet connector behind the appliance by pushing to end through heating the hose in boiled water. Afterward, bring the clamp towards end section of the hose and tighten it with screwdriver. The gasket and hose inlet connector required for connection is as the picture shown below.

NOTE: The regulator to be affixed on LPG cylinder should have 300 mmSS feature.

17

GB

For natural gas connection;

Main Gas Pipe

Gasket

Nut

Natural Gas

Connection Hose

Gas hose passage way

Figure 1

Figure 2

WARNING: Natural gas connection should be done by authorized service.

For natural gas connection, place gasket in the nut at the edge of natural gas connection hose. To install the hose on main gas pipe, turn the nut. Complete the connection by making gas leakage control.

Connect the appliance to the gas piping tap in shortest possible route and in a way that ensure no gas leakage will occur.

In order to carry on a tightness and sealing safety check ensure that the knobs on the control panel are closed and the gas cylindir is open.

WARNING: While performing a gas leakage check, never use any kind of lighter, match, cigarette or similar burning substance.

Apply soap bubble on the connection points. If there is any kind of leakage then it will cause bubbling.

While inserting the appliance in place ensure that it is on the same level with the worktop. If required adjust the legs inorder the make level with the worktop.

Use the appliance on a level surface and in a well ventilated environment.

WARNING: Before placint the appliance, check that the local distribution conditions (gas type and pressure) conform to the product settings.

18

Nozzle change operation

1.Please use driver with special head for removed and install nozzle as.

(figure 3)

2.Please remove nozzle (figure 4) from burner with special nozzle driver and install new nozzle. (figure 5)

Figure 3

Figure 4

Figure 5

Ventilation of room

The air needed for burning is received from room air and the gases emitted are given directly in room. For safe operation of your product, good room ventilation is a precondition. If no window or room to be utilized for room ventilation is available, additional ventilation should be installed. However, room has a door opening outside, it is no needed to vent holes.

Room size	Ventilating opening
Smaller than 5 m³	min. 100 cm²
Between 5 m³ - 10 m³	min. 50 cm²
Bigger than 10 m³	no need
In basement or cellar	min. 65 cm²

19

GB

Reduced gas flow rate setting for hob taps

1.Ignite the burner that is to be adjustment and turn the knob to the reduced position.

2.Remove the knob from the gas tap.

3.Use an appropriately sized screwdriver to adjust the flow rate adjustment screw. For LPG (butane-pro pane) turn the screw clockwise. For the naturel gas, you should turn the screw counterclockwise once.

“The normal length of a straight flame in the reduced position should be 6-7 mm.“

4.If the flame is higher then the desired position, turn the screw clockwise.

If it is smaller turn anticolockwise.

5.For the last control, bring the burner both to higt-flame and reduced positions and check whether the flame is on or off.

Depending on the type of gas tap used in your appliance the adjustment screw position may vary.

To adjust your oven acc. to the gas type, make the adjustment for reduced flame carefully by turning with a small screwdriver as shown below on the screw in the middle of the gas cocks as well as nozzle changes (figure 6 and 7).

Figure 6

Figure 7

20

Removal of the lower and upper burner and installation of the injector to the gas oven

Removal of the upper burner:

With the help of a screw driver, remove the screw as shown in figure 8. As shown in figure 8.1, remove the injector in the bearing with a socket wrench. In order to re-place the burner, apply the removal process reversely.

Figure 8

Figure 8.1

Removal of the lower burner:

The lower burner door has been fixed with two screws. As shown in figure 9, remove it with the help of a screw driver. As shown in figure 9.1, remove the injector in the bearing with a socket wrench. In order to re-place the burner, apply the removal process reversely.

Figure 9

Figure 9.1

21

GB INTRODUCTION OF THE APPLIANCE

1

12

2

3

4

5

13

6

7

8

14

9

10

15

11

16

1.	Oven control knobs	9. Lamp
2.	Hob control knobs	10.	Grill
3.	Wire grill	11.	Deep tray
4.	Deep tray	12.	Large burner
5.	Door	13.	Middle burner
6.	Handle	14.	Auxiliary burner
7.	Lower cabinet door	15.	Wok burner *
8.	Plastic leg	16.	Hot plate *

22

Accesories

Deep tray

Used for pastries, deep fried foods and stew recipes. In case of frying directly on the grill for cakes, frozen foods and meat dishes, it can be used of oil pick-up tray.

Wire grill

Used for frying and/or placing the foods to be baked, fried and frozen foods on the desired rack.

Telescopic rail *

With the help of telescopic rails, the trays and/or wire racks can be easily placed and removed.

In tray wire grill *

Foods that can stick while cooking such as beef are placed on in tray grill. Thus, the contact and sticking of the food is prevented.

Tray handle *

It is used to hold hot trays.

Splash back *

The resulting temperature of the oven chimney avoid contact with the wall.

Coffee pot support unit *

Can be used for coffee pot.

23

GB

Technical Features Of Your Oven

Specifications	90x60
Outer width	900 mm
Outer depth	610 mm
Outer height	925 mm
Lamp power	15-25 W
Bottom heating element	2000 W
Top heating element	1500 W
Grill heating element	** 2500 W / 3250 W
Turbo heating element	2200 W x 1 / 1250 W x 2
Supply voltage	220-240V AC / 380-415V AC 50/60 Hz
Hot plate 145 mm *	1000 W
Hot plate 180 mm *	1500 W
Hot plate rapid 145 mm *	1500 W
Hot plate rapid 180 mm *	2000 W

** only for mix product.

WARNING: For the modification to be done by authorized service, this table should be considered. Manufacturer may not be held responsible for any problems rising because of any faulty modification.

WARNING: In order to increase the product quality, the technical specifications may be changed without prior notice.

WARNING: The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

24

Burner	G20,20 mbar					G20,25 mbar		G20,13 mbar
	G25,25 mbar
Specifications
		Gas natural				Gas natural		Gas natural
	Injector		1,40		mm	1,28	mm	1,60	mm
Wok
	Gas flow		0,333		m³/h	0,333	m³/h	0,333	m³/h
Burner
	Power		3,50		kW	3,50	kW	3,50	kW
	Injector		1,15		mm	1,10	mm	1,45	mm
Rapid
	Gas flow		0,276		m³/h	0,276	m³/h	0,276	m³/h
Burner
	Power		2,90		kW	2,90	kW	2,90	kW
	Injector		0,97		mm	0,92	mm	1,10	mm
Semi-Rapid
	Gas flow		0,162		m³/h	0,162	m³/h	0,162	m³/h
Burner
	Power		1,70		kW	1,70	kW	1,70	kW
	Injector		0,72		mm	0,70	mm	0,85	mm
Auxiliary
	Gas flow		0,96		m³/h	0,96	m³/h	0,96	m³/h
Burner
	Power		0,95		kW	0,95	kW	0,95	kW
	Injector		1,10		mm	1,03	mm	1,15	mm
Grill
	Gas flow		0,238		m³/h	0,238	m³/h	0,238	m³/h
Burner
	Power		2,50		kW	2,50	kW	2,50	kW
	Injector		1,30		mm	1,15	mm	1,55	mm
Oven
	Gas flow		0,333		m³/h	0,333	m³/h	0,333	m³/h
Burner
	Power		3,50		kW	3,50	kW	3,50	kW

25

GB

Burner	G30,28-30 mbar				G30,50 mbar			G30,37 mbar
	G31,37 mbar
Specifications
		LPG				LPG			LPG
	Injector	0,96		mm	0,76		mm	0,96		mm
Wok
	Gas flow	254		g/h	254		g/h	254		g/h
Burner
	Power	3,50		kW	3,5		kW	3,5		kW
	Injector	0,85		mm	0,75		mm	0,85		mm
Rapid
	Gas flow	211		g/h	211		g/h	211		g/h
Burner
	Power	2,90		kW	2,90		kW	2,90		kW
	Injector	0,65		mm	0,60		mm	0,65		mm
Semi-Rapid
	Gas flow	124		g/h	124		g/h	124		g/h
Burner
	Power	1,70		kW	1,70		kW	1,70		kW
	Injector	0,50		mm	0,43		mm	0,50		mm
Auxiliary
	Gas flow	69		g/h	69,1		g/h	69,1		g/h
Burner
	Power	0,95		kW	0,95		kW	0,95		kW
	Injector	0,78		mm	0,70		mm	0,75		mm
Grill
	Gas flow	182		g/h	182		g/h	182		g/h
Burner
	Power	2,50		kW	2,50		kW	2,50		kW
	Injector	0,92		mm	0,82		mm	0,87		mm
Oven
	Gas flow	254		g/h	254		g/h	254		g/h
Burner
	Power	3,50		kW	3,50		kW	3,50		kW

WARNING: Diameter values written on the injector are specified without a comma. For example; The diameter of 1,70 mm is specified as 170 on the injector.

26

INSTALLATION OF YOUR OVEN

Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorized persons.

WARNING: It is customer's responsibility to prepare the location the product shall be placed on and also to have the electrical installation prepared.

WARNING: The rules in local standards about electrical installations shall be followed during product installation.

WARNING: Check for any damage on the appliance before installing it. Do not have the product installed if it is damaged. Damaged products cause a risk for your safety.

Right Place for Installation and Important Warnings

Appliance feet should not stay on soft surfaces such as carpets. The kitchen floor shall be durable to carry the unit weight and any other kitchenware that may be used on the oven.

The appliance is suitable for use on both side walls, without any support, or without being installed in a cabinet. If a hood or aspirator will be installed above the cooker, follow the instructions of the manufacturer for height of mounting. (min. 650 mm)

27