V8 USER MANUAL
P.
V O RT E X
SILVER SERIES
INFORMATION FOR USE FOR MODELS
VORTEX SILVER SERIES V8
SSUM_GB_2010-R1_11-2010
The leading version of this brochure is the English one which shall prevail to the exclusion of the national translation on hand.
Copyright 2010 by CAMCO Produktionsund Vertriebs-GmbH für Beschallungsund Beleuchtungsanlagen Fischpicke 5, D-57482 Wenden, Germany Telephone +49 (0) 2762 408-0
V O RT E X
SILVER SERIES
Please visit our website www.camcoaudio.com for the latest version of this user manual. Please note that the leading version of CAMCO manuals is always the English one.
USER MANUAL
VORTEX SILVER SERIES V8
IMPORTANT SAFETY INSTRUCTIONS
P.
IMPORTANT SAFETY INSTRUCTIONS
1. General
The amplifier may only be used in accordance with the information provided in the user manual. Before and during the usage of the amplifier please ensure that all recommendations, especially the safety recommendations as detailed in the user manual, are adhered to.
The VORTEX SILVER SERIES V8 amplifier is designed for the amplification of pulsed audio signals. The amplifier should only be connected to speakers with an average impedance as indicated.
2. User Manual
Read the information for use (user manual) and heed all warnings. Keep this user manual in a safe place during the lifetime of the amplifier. The user manual forms an integral part of the amplifier. Reselling the amplifier is only possible if the user manual is available. In case of reselling the amplifier, the reseller has to document any changes made to the amplifier in writing and pass the documentation on to the buyer.
3. Environments
Use this amplifier only in E1, E2, E3, or E4 environments according to EN55103-2 “Electromagnetic compatibility – Product family standard for audio, video, and audio-visual and entertainment lighting control apparatus for professional use – Part 2: Immunity”.
4. Mounting/Placement
Do not place this amplifier on an unstable cart, stand, tripod, bracket, or table. The amplifier may fall causing serious injury and serious damage to the product. Any mounting of the amplifier should follow the manufacturer´s instructions. Only mounting accessory shall be used which is recommended by the manufacturer.
USER MANUAL
VORTEX SILVER SERIES V8
V O RT E X
SILVER SERIES
5. Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them or against them, paying particular attention to cords and plugs and the point where they exit from the amplifier.
6. Heat
Do not use this amplifier near any heat sources such as radiators, heat registers, stoves, or other apparatuses that produce heat.
7. Water and Moisture
Do not expose this device to rain or moisture. Do not use this amplifier near water (for example swimming pools and fountains). Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit. IP-20 equipment. There is no protection against splashing water.
8. Ventilation
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the amplifier and to protect it from overheating. These openings must not be blocked or covered. This amplifier should not be installed unless proper ventilation is provided or manufacturer’s instructions have been adhered to.
9. Interference Of External Objects and/or Liquids with the Appliance Never push objects of any kind into this amplifier through openings as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on the amplifier.
IMPORTANT SAFETY INSTRUCTIONS
P.
V O RT E X
SILVER SERIES
10. Connections
When you connect the amplifier to other equipment, turn off the power and unplug all of the equipment from the supply source. Failure to do so may cause an electric shock and serious personal injury. Read the user manual of the other equipment carefully and follow the instructions when making the connections.
11. Lightning
For additional protection of this amplifier during lightning storms or when it is left unattended and/or unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the amplifier due to lightning and power line surges. Disconnection from the mains power supply can only be achieved by removing the plug from the mains socket and by external disconnecting all poles from the mains.
12. Damages that Require Service
Unplug this amplifier from the mains supply and refer to your dealer/distributor or other authorized repair workshop if any of the following situations occur:
if liquid has been spilled or objects have fallen into the amplifier
if the amplifier has been exposed to rain or moisture
if the amplifier has been dropped or damaged in any other way
if the power supply cord or plug has been damaged
when the amplifier exhibits a distinct change from its normal function or performance
in case the amplifier has been used in a dusty environment for quite a period of time
13. Servicing
All service and repair work must be carried out by a dealer/distributor authorized by CAMCO. Do not attempt to service this amplifier yourself. As opening or removing covers may expose you to dangerous voltage or other hazards, the amplifier may only be opened by qualified personnel. Please refer to your dealer/distributor.
14. Spare Parts
When spare parts are required, please ensure that the dealer/distributor only uses spare parts specified by the manufacturer. The use of un authorized spare parts may result in injury and/or damage through fire or electric shock or other electricity-related hazards.
15. Safety Check
Upon completion of any service or repairs to this product, ask the dealer/ distributor to perform safety checks to determine that the amplifier works properly.
Recommendations on how to carry out the safety test can be found in DIN VDE 0701-1 “Maintenance, Modification and Test of Electronic Appliances“.
16. Cleaning
Unplug this amplifier from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Clean only with dry cloth.
17. Packaging and Shipping
When shipping the VORTEX SILVER SERIES V8 amplifier, always use the original shipping carton and packing materials. For maximum protection repack the unit as it was originally packed at the factory.
USER MANUAL
VORTEX SILVER SERIES V8
EXPLANATION OF SYMBOLS
P.
USER MANUAL
VORTEX SILVER SERIES V8
V O RT E X
SILVER SERIES
|
|
CAUTION – HIGH VOLTAGE HAZARDS |
|
CAUTION |
|
|
EXIST WITHIN THIS PRODUCT. |
|
|
RISK OF ELECTRIC SHOCK |
REFER ALL SERVICING TO |
|
DO NOT OPEN |
AUTHORIZED PERSONNEL. |
|
|
|
THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS
VOLTAGE WITHIN THE PRODUCT’S ENCLOSURE.
THE EXCLAMATION MARK IS INTENDED TO ALERT THE USER
TO IMPORTANT INSTRUCTIONS ALSO FOR MAINTENANCE IN THE
LITERATURE ACCOMPANYING THE AMPLIFIER.
THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL ALERTS
THE USER TO DANGEROUSLY HIGH VOLTAGE AT
THE OUTPUT CONNECTORS
CAUTION – RISK OF ELECTRIC SHOCK – DO NOT OPEN.
WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS AMPLIFIER TO RAIN OR MOISTURE.
THE AMPLIFIER MAY ONLY BE CONNECTED
TO A SOCKET WITH A PROTECTIVE EARTH CONDUCTOR.
EC DECLARATION OF CONFORMITY
P.
V O RT E X
SILVER SERIES
EC Declaration Of Conformity In Accordance To EC Directives: electromagnetic compatibility (Council Directive 89/336/EEC, as amended by Directives 92/31/EEC and 93/68/EEC); low-voltage electrical equipment (Council Directive 73/23/EEC )
Manufacturer´s Name:
CAMCO Produktionsund Vertriebs-GmbH für Beschallungsund Beleuchtungsanlagen
Manufacturer´s Address:
Fischpicke 5, D-57482 Wenden, Germany
Declares That The Product With The Model Name:
CAMCO Power amplifier VORTEX SILVER SERIES V8
Conforms To The Following Standards:
EN60065 Safety
EN55103-1 Emission
EN55103-2 Immunity
The operating conditions and application environments presupposed in the information for use (user manual) are to be kept to accordingly.
Please Note: The following formulations have been chosen: VORTEX-V8 for the type plate and for the EC declaration of conformity. V8 for the front face of the appliance and for the text in the user manual.
Wenden, 20.05.2010
Joachim Stöcker
USER MANUAL
VORTEX SILVER SERIES V8
CONTENTS
P.
V O RT E X
SILVER SERIES
P. 2 IMPORTANT SAFETY INSTRUCTIONS P. 4 EXPLANATION OF SYMBOLS
P. 5 EC DECLARATION OF CONFORMITY P. 6 CONTENTS
P.7 1 WELCOME
1.1Welcome To CAMCO P. 8 2 THE AMP
2.1Unpacking
2.2The Amplifier P. 9 2.3 V8 – The Front
2.4V8 – The Rear P. 10 2.5 Factory settings
3 INSTALLATION
3.1Mounting P. 11 3.2 Cooling
3.3Wiring
3.3.1Analog Input - XLR Connection
3.3.2Dual Channel Operation
3.3.3Parallel Mono Operation
P.12 3.3.4 Mono Bridge Operation
3.3.5SPEAKON Connection P. 13 3.4 Mains supply
P. 14 4 OPERATION
4.1Screen User Interface
4.1.1Screen User Interface Elements
4.1.2Handle the Selection Bars
P.15 4.1.3 Hot key Functions
4.2Power On Sequence P. 16 4.3 Indicators
4.3.1Input Selection LED
4.3.2Output Mode LED
4.3.3Clip LED
4.3.4Signal LED
4.3.5Device Identifier LED
4.3.6DSP LED
4.3.7Uman Network Status LED P. 17 4.4 Main Menu
P.17 4.5 Input/Output
4.5.1Input Selection
4.5.2Output Mode
4.6Amp Gain and Input Sensitivity
4.7DSP
P.18 4.8 Power Amp Protection Systems
4.8.1Clip Limiter
4.8.2SOA Protection
4.8.3DC Protection
4.8.4DC Servo
4.8.5Overcurrent Protection
4.8.6Thermal Protection
4.9Main Protections
4.9.1Inrush Current Limitation
4.9.2Mains Over Voltage Detection
4.9.3Mains Failure Detection
P.19 4.9.4 Fuse Protection
4.10Main SMPS Protections
4.10.1Overcurrent Protection
4.10.2Thermal Protection
4.11Fans
P. 20 4.12 Filter Cleaning P. 21 5 SPECIFICATION
P. 23 6 TYPICAL PERFORMANCE DIAGRAMS
P.24 7 WARRANTY INFORMATION
7.1Summary of Warranty
7.2Items Excluded from This Warranty
7.3What CAMCO Will Do
7.4How to Obtain Warranty Service
7.5CAMCO’s Product Improvement
P. 25 8 SERVICE INFORMATION
P.26 9 MAINTENANCE INFORMATION
10 DECOMMISSIONING
P. 27 COMPANY INFORMATION
P.28 NOTICES/CHANGES MADE TO THE AMPLIFIER
USER MANUAL
VORTEX SILVER SERIES V8
1 WELCOME
P.
1.1 Welcome To CAMCO
Established in 1983, CAMCO has gained worldwide experience with professional sound reinforcement technology. Within the audio market, CAMCO specialises in the production and marketing of high quality power amplifiers and sound systems to be used both on tour and in static installations.
The success of the LA, DL, DX, and TECTON series power amps has made the name CAMCO synonymous with professional quality, high performance, and utterly reliable power amps.
With the VORTEX power amp series, CAMCO has been pioneering a new dimension in professional power amp construction in the last decade. The seamless combination of ground-breaking technology with proven safety elements has been the hallmark of the VORTEX series.
CAMCO’s commitment to research and development, seen not just in the area of materials and technology but also most importantly in its highly skilled and motivated workforce, is one of the keys to its ongoing success.
The new technologies that have been developed and applied to the proaudio industry have been substantial over the last few years, but actually it is only now that we as designers, researchers, and developers are able to take the next steps in building a more coherent future with tools that really integrate together.
USER MANUAL
VORTEX SILVER SERIES V8
V O RT E X
SILVER SERIES
The ancient cultures developed an understanding of our world by a realisation of the individual elements that are at the core of all things. These were described as the Five Elements. We see the development of technology and the resulting products in the same way. Today CAMCO follows the same pattern of realisation, our five elements are ; Efficiency, Power, Networking, Signal Processing, and Design.
As the five elements come together to form the One, we can see that the evolution of amplifiers is now reaching the point where we can truly call the amplifier a universal audio platform, not just X-amount of power output, as impressive as it is in terms of true power per channel across the V8, but a Network station, an advanced Signal Processing station, a multicore like distribution centre, too, allowing hundreds of channels of processing and data to be sent and received which all can be controlled from one platform.
Thus the efficiency of the complete package now shows itself to be much more than just a power amplifier. The CAMCO VORTEX SILVER SERIES V8 is evolving into much more; it is in fact becoming the evolution of today´s pro-audio needs and conditions. It will be the bench mark for building the future.
Welcome to the new world of professional power amplifiers –
WELCOME TO CAMCO!
2 THE AMPLIFIER
P.
2.1 Unpacking
Please unpack and inspect your new amplifier for any damage that may have occurred during transit. If damage is found, notify the transportation company immediately. Only you as the consignee may initiate a claim for shipping damage. CAMCO will be happy to cooperate fully as needed. Please save the shipping carton as evidence of damage for the shipper’s inspection.
Even if the amplifier has arrived in perfect condition, save all packing materials for any future transport of the unit.
When shipping the V8 amplifier, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.
NOTE: NEVER SHIP THE AMPLIFIER WITHOUT THE ORIGINAL PACKING MATERIALS.
USER MANUAL
VORTEX SILVER SERIES V8
V O RT E X
SILVER SERIES
2.2 The Amplifier
The V8 amplifiers offer a power output of:
4400 W peak per channel @ 4 Ω (3800 W rms) 4400 W peak per channel @ 2 Ω (4000 W rms) 8800 W peak in Mono Bridge @ 4 Ω (7600 W rms) 8800 W peak in Parallel Mono @ 2 Ω (8000 W rms)
using a bipolar class H high efficiency power amplifier output stage.
The V8 power amplifier is fitted with Dual Voltage Switched Mode Power Supply (SMPS) with automatic voltage selection for 120V / 230 V operation, which significantly reduces the weight and size (only 2U) of the amplifier. Using SMPS, the seamlessly regulated symmetrical supply voltages of the power amplifier are more stable and efficient than the power supplies used in conventional amplifiers.
The V8 also uses a microprocessor for controlling and monitoring the power amp. This has four main advantages over more traditional power amp systems:
Reduced Distortion
Improved Noise Characteristics
Integrated Remote Control 
Indication of Protection or Failures
The V8 has been designed as an intelligent and powerful amplifier for performing specialised tasks within a complex audio system. Users can adapt the power amp to meet their specific audio requirements before use. The display mounted on the front of the V8 amplifier allow the different functions to be accessed. Since there are a lot of parameters available, it is important that users should familiarize themselves thoroughly with the entire range of settings and programmable features before using the power amp.
If you have any questions regarding features and/or functions of your V8 amplifier, CAMCO will be pleased to provide you with further information. Alternatively, contact your dealer or distributor.
Loading...