Cambridge Audio TV5 operation manual

TV5

Vol (2secs)Learn

1

2

Learn Vol

Vol on TV remote

Learn Vol

Vol on TV remote

AUX Line in Optical in AC power socket ARC

Optical In R LAudio In Aux InARC

Service

Only

Aux In RL Audio In Optical In ARC

Max Power Consumption: 120W

Power AC

100-240V AC ~ 50/60Hz

TV5 TV speaker base with bluetooth

PLACEMENT! TV5 IS DESIGNED TO BE PLACED UNDER YOUR TV. THE TV MUST HAVE A BASE NO WIDER THAN 725MM

(28.5”) AND NO DEEPER THAN 300MM (12”) AND MUST WEIGH NO MORE THAN 30KG (66LBS). IF THE TV BASE IS TOO
LARGE TO FIT, PLACE TV5 ON A LOWER SHELF OF YOUR TV RACK

TV CONNECTIONS

Only one audio connection to your TV is
required, in order of preference:

1. Optical: If available on your T V, use this for
best quality.

2. ARC: If your T V has a socket labelled ARC

use this connection.

3. RCA: Connect both left and right channels

to your TV.

4. AUX In: Connect to the headphone output

of your TV if neither ARC or optical are
available on your TV.

Note: If the 3.5mm socket is used it takes
priority over the RCA input which will be muted.

BLUETOOTH SET-UP

TV5 is equipped with Bluetooth to allow
wireless playback from any Bluetooth
equipped phone, tablet or computer.

1. Select the Bluetooth input BT on the
remote.

2. To connect a Bluetooth device to TV5,
press and hold the BT button and the
Blue LED will blink.

3. Consult the instructions of the Bluetooth
device to connect to TV5. Successful
pairing will be signalled by a ‘beep’ from
the unit and the Blue LED will stop

ashing.

TOP TIPS

SOUND MODES

There are 4 dierent modes that can be selected to enhance your sound

experience. You can also Increase or decrease the Subwoofer output.

TV: Greatly improved T V sound.
Music: Enhances stereo music and music videos.
Film: Designed to get the best sound from movies.
Voice: Enhances voices to improve intelligibility.

Once paired, music from your device will play
through the unit.
To add another Bluetooth device, repeat from
step 2. TV5 will store up to 8 paired devices
in memory.

LEARNING YOUR TV REMOTE

Remove the fabric grille and locate the
control panel. Follow the instructions
remembering to point your TV remote at the
control panel whilst learning.

AUTO POWER DOWN

To save power, TV5 will

automatically turn o after 20

minutes if no sound is playing
from your TV.

AUTO POWER ON

When you turn on your TV,
TV5 will detect the sound and
automatically turn on.

TV5 is only able to decode LPCM(PCM) 2.0 format signal, Please ensure your source output setting is set to LPCM(PCM).

To talk to us, call [phone] (UK Local) or 1-87 7- 3 5 7- 8 20 4 (USA)