Page 1
ES10
Exterior SpeakersInstallation Guide
Page 2
1 Incognito Exterior speakers
Introduction ................................................................................................1
Preparing the location ................................................................................2
Care and maintenance ...............................................................................2
Mounting the ES10 .....................................................................................3
Connecting the ES10 ..................................................................................4
Troubleshooting...........................................................................................5
Specifications...............................................................................................5
Warranty........................................................................................................6
CONTENTS
Thank yyou ffor ppurchasing tthese CCambridge AAudio iincognito EES10
Exterior SSpeakers. IIncognito iis aa ccost-eeffective, mmodular bbased ssystem
using sstandard CCat-55 oor CCat-66 ccable tto ddistribute hhi-ffi qquality ssound aand
video iimages aaround tthe hhome.
About tthis uunit
Your new Incognito Exterior speakers have been designed specifically for
outdoor use.
They are the result of an extensive research and development programme
undertaken to provide you with accurate, uncompromised reproduction
of music in this environment. These ES10 Exterior speakers can be
easily mounted vertically or horizontally into your outdoor listening area
and can be used with an Incognito Multi-Room system or conventional
Hi-Fi or AV equipment.
Please take time to read this guide, as it contains important installation
information. The ES10 can only be as good as the system it is connected
to. Please do not compromise on your audio/visual source components.
Naturally, we recommend products from the Cambridge Audio Azur
range.
Now we invite you to sit back, relax and enjoy!
Matthew Bramble
Technical Director
INTRODUCTION
Page 3
540A/640A Integrated amplifier
Incognito Exterior speakers 2
ES10 Exterior speakers
It is advisable to plan all aspects of installation in advance of work
beginning. Great care should be taken to ensure that all building
regulations are followed. If in doubt consult an expert.
When placing the ES 10 speakers, thought should be given to positions
which give the best desired sound coverage, Please ensure the
speakers are placed seven feet apart, ear level to the listener. Also,
locate speakers taking into account location of furnishings for optimal
stereo reproduction.
Points tto rremember bbefore bbefore mmounting yyour sspeakers:
- Please place your ES10 speakers at least two feet from any
television or computer screen, the speakers are not video shielded.
- Measure the length of speaker wire you need to connect both speakers
to your receiver or amplifier.
- Think about the best route for speaker cable, the wire must not be
pulled, pinched or tripped over.
PREPARING THE LOCATION
Your speakers are an example of superior design and craftsmanship.
These suggestions will help you care for them so you can enjoy them
for years.
The ES10 speakers are manufactured to resist a variety of weather
conditions. For best results position them so they are not directly
exposed to the elements. The underside of eaves and overhangs are the
ideal location and provide the best protection for exterior speakers.
Keep the speakers away from dust or dirt, which can cause premature
wear of parts.
Wipe the speaker frame occasionally with a damp cloth to keep it
looking new. Do not use harsh chemicals, cleaning solvents or strong
detergents.
CARE AND MAINTENANCE
7 FFeet
Page 4
3 Incognito Exterior speakers
Before installing and routing your wiring, you may wish to test the
speaker setup to check for a good stereo sound in your listening area.
To mmount tthe bbracket ffollow tthese ssteps:
1. Unscrew and remove the bracket from the speaker. You can mount
the bracket either horizontally or vertically onto the chosen wall.
2. Ensure the chosen wall or surface is solid, never mount a speaker on
a plasterboard or unreinforced wall.
3. Use the large middle hole to route your wiring (the bracket will cover
the hole in the wall). Use the remaining keyholes to screw your fixings
into the wall.
4. Attach the speaker to bracket and adjust the speaker to face the
listening area.
Please NNote:
Fixings and screws are not supplied. If you are unsure as to which
fixings are suitable for this bracket and speaker, you should take
professional advice and obtain the correct fixings.
MOUNTING THE ES10
Cable routing hole
Page 5
ES10 Exterior speakers
Incognito Exterior speakers 4
The negative terminal on the amplifier left channel, marked - or
coloured black, must be connected to the negative terminal on
the left loudspeaker. Repeat connections for the right channel.
The speaker cable is coded with a bead or stripe down one
lead’s insulation, or has differently coloured wires.
5. If your speakers are wired incorrectly they will be out of phase
and sound hollow and indistinct, with a weak bass. Re-check
your connections for correct polarity and reverse the connections
if necessary.
Do not compromise the performance of your system by using
inferior quality speaker cables. We recommend that high quality
cables of 16 gauge or higher be used. Your professional dealer will
give you good advice. Always unplug all A.C. powered components
before making any loudspeaker or component connections. This will
avoid the risk of electric shock or damage to your equipment.
Follow these steps to connect the speaker to your amplification system:
1. Route the speaker cable from your amplification system to the
speakers.
Q
Avoid routing the speaker cable near electrical wires
Q
Do not nail or staple the cable
2. Separate about 100mm of speaker cable at each end.
3. Using a wire stripper, remove about 10mm of insulation from
both ends of each conductor, and then twist the strands of each
conductor (fig.1).
4. Observing polarity is of the utmost importance while connecting
your speakers. Switch off your amplifier whenever making
connections. Connect the positive terminal on the amplifier left
channel, marked + or coloured red, to the positive terminal on
the left loudspeaker.
CONNECTING THE ES10
fig.1.
fig.2.
100mm
10mm
Page 6
5 Incognito Exterior speakers
There iis nno ssound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
The ssound iis ddistorted oor ggarbled
Check aerial connections and placements.
There iis aa hhum ccoming ffrom tthe sspeaker
Ensure that all cable connections are secure.
There iis uunwanted bbackground nnoise aand iinterference
Move the tuner (or other source) away from any other electrical
equipment that may be likely to cause interference.
SPECIFICATIONSTROUBLESHOOTING
Frequency rresponse
80Hz–20kHz
Impedance
4-8 Ohms
Operational eefficiency
88dB for 2.83V
Weight
2.1kg / 4.6lbs
Dimensions
240 x 178 x 162mm
The crossed-out wheeled bin is the European Union
symbol for indicating separate collection for electrical
and electronic equipment. This product contains
electrical and electronic equipment which should be
reused, recycled or recovered and should not be
disposed of with unsorted regular waste. Please return
the unit or contact the authorised dealer from whom you
purchased this product for more information.
Page 7
ES10 Exterior speakers
Incognito Exterior speakers 6
Cambridge Audio warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below).
Cambridge Audio will repair or replace (at Cambridge Audio’s option)
this product or any defective parts in this product. Warranty periods may
vary from country to country. If in doubt consult your dealer and ensure
that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio
authorised dealer from which you purchased this product. If your dealer
is not equipped to perform the repair of your Cambridge Audio product,
it can be returned by your dealer to Cambridge Audio or an authorised
Cambridge Audio service agent. You will need to ship this product in
either its original packaging or packaging affording an equal degree
of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which
is evidence that this product is within the warranty period, must be
presented to obtain warranty service.
This warranty is invalid if (a) the factory-applied serial number has been
altered or removed from this product or (b) this product was not
purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to
confirm that you have an unaltered serial number and/or you purchased
from a Cambridge Audio authorised dealer.
This warranty does not cover cosmetic damage or damage due to acts
of God, accident, misuse, abuse, negligence, commercial use, or
modification of, or to any part of, the product. This warranty does not
cover damage due to improper operation, maintenance or installation,
or attempted repair by anyone other than Cambridge Audio or a Cambridge
Audio dealer, or authorised service agent which is authorised to do
Cambridge Audio warranty work. Any unauthorised repairs will void this
warranty. This warranty does not cover products sold AS IS or WITH
ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY
ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED
TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PRACTICAL PURPOSE.
Some countries and US states do not allow the exclusion or limitation of
incidental or consequential damages or implied warranties so the above
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other statutory rights, which vary from state to
state or country to country.
LIMITED WARRANTY
Page 8
incognito E S1 0
www.cambridge-aaudio.com
Part No. AP18812/1
Loading...