Cambium Networks cnMatrix EX2010-P, cnMatrix EX2028, cnMatrix EX2010, cnMatrix EX2028-P Quick Start Manual

cnMatrix Switch (8 port or 24 port)

Power Cord

Quick Start Guide

Part Number

Number

Power

Ethernet

Throughput

Switch

cnMatrix EX2010

8

No

20 Gbps

cnMatrix EX2010-P

8

Yes

20 Gbps

Ports will display an orange border

cnMatrix EX2028

24

No

128 Gbps
cnMatrix EX2028-P

24

Yes

128 Gbps

Ports will display an orange border

cnMatrix Quick Start Guide

Thank you for choosing the cnMatrix switch, a Cambium Networks communications device. Before you
begin installing the switch,
such as PuTTY or OpenSSH SSH Client.

Package Contents

verify you have all the package contents available, and a PC with SSH client,

Product Overview

The cnMatrix switch come in four version to support various deployment scenarios.

of Ports

over

Powering Up

1

When the switch is booting up, the illuminated Cambium Networks logo will be blinking

solid blue.

DHCP Client is enabled by default on vlan 1.
1

In Windows, double-click the Control Panel command. The
Control Panel window is displayed.

2

In the Control Panel window, select the View network status
and tasks

Network and Sharing Center

is displayed.

3

Click the Change adapter settings option. The Network
Connections window is displayed.

4

Double-click the interface. The interface Properties window

5

Select the Internet Protocol Version 4 (TCP/IPv4) option.

cnMatrix Quick Start Guide

Connect the power cord to the power inlet, and then plug the power cord into a wall socket.

blue. When the switch is fully up and running, the illuminated Cambium Networks logo is

Default Configuration

IP address 192.168.0.1 is automatically configured on Out-Of-Band Management Port (MGMT). There is
no default IP address In Band Network Ports.

Default login information:

Username: admin

Password: admin

Configure Management PC

option. The

is displayed.

Click OK.

window

2