Calphalon Activesense Blcltd User Manual

ActiveSense

TM

Blender

INSTRUCTION MANUAL

MODEL: BLCLTD

TABLE OF CONTENTS

IMPORTANT SAFEGUARDS 2

POLARIZED PLUG 3

PRODUCT DIAGRAM 4

CONTROL PANEL 4

USAGE INSTRUCTIONS

PREPARING YOUR ACTIVESENSE BLENDER 5

HOW TO USE YOUR ACTIVESENSE BLENDER 5

USING THE PRE-PORGRAMMED SETTINGS 5

THE ADD LIQUID FUNCTION 6

USING THE MANUAL SETTINGS 6

USING THE PULSE FUNCTION 6

USING THE BLEND-N-GO® CUP 6

CLEANING & MAINTENANCE 7

TROUBLESHOOTING 8

WARRANTY 9

1

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and/or injury to persons including the following:

1. Read all instructions before using this product.

2. To protect against electric shock, do not place or immerse cord, plugs, or appliance in water or other liquid.

3. This appliance is not intended for use by children or by persons with reduced physical, sensory, or
mental capabilities, or lack of experience and knowledge. Close supervision is necessary when any
appliance is used near children. Children should be supervised to ensure that they do not play with the
appliance. Keep the appliance and its cord out of reach of children.

4. Never leave appliance unattended when in use.

5. Unplug from outlet when not in use, before putting on or taking o parts and before cleaning. Allow to
cool before putting on or taking o parts, and before cleaning. To disconnect, turn any control to OFF,
then unplug power cord from outlet. To unplug, grasp the plug and pull from the outlet. Never pull from
the power cord.

6. Avoid contacting moving parts.

7. Flashing light indicates ready to operate (models with stand-by mode). Avoid any contact with blades or
moveable parts.

8. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has
been damaged in any manner. Do not attempt to replace or splice a damaged cord. Return appliance to
the manufacturer (see warranty) for examination, repair or adjustment.

9. For appliances with markings on plug blade: This appliance has important markings on the plug blade.
The attachment plug or entire cordset (if plug is molded onto cord) is not suitable for replacement. If
damaged, the appliance shall be replaced.

10. The use of attachments, including canning jars, not recommended or sold by the manufacturer may
cause fire, electric shock or injury.

11. Do not use outdoors or for commercial purposes.

12. Do not let cord hang over edge of table or counter, or touch hot surfaces, including the stove.

13. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or
damage to the blender. A scraper may be used but must be used only when the blender is not running.

14. Blades are sharp. Handle carefully, especially when removing the blades from the container, emptying
the container and during cleaning.

15. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.

16. Always hold container while operating the appliance. If the container should turn when the motor is
turned ON, switch appliance OFF immediately and tighten the container in the threaded bottom.

17. Always operate blender with cover in place. Always wait until all moving parts have stopped before
removing any lid or cover.

18. When blending hot liquids, remove center piece of two-piece cover (if a two-piece cover is provided).
Beware of steam. Do not blend boiling liquids.

19. Do not use appliance for other than intended use. Misuse can cause injuries. Always use appliance on a
dry, stable, level surface. Never fill beyond the MAX fill line.

2