CORPORATION
1.5A Low Dropout Voltage Regulator
Adjustable & Fixed Output
Fast Response
CLM2815
FEATURES
∙ Adjustable Output . . . . . . . . . . . . . . . . . . . Down To 1.2V
∙ Fixed Output Voltages. . . . . . . . . . . . . . 1.5, 2.5, 3.3, 5.0V
∙ Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
∙ Low Dropout Voltage. . . . . . . . . . . . . . . . . . . . . 1.1V Typ.
∙Extremely Tight Load And Line Regulation
∙Current & Thermal Limiting
∙Standard 3-Terminal Low Cost TO-220, TO-263 & TO-252
∙Similar To Industry Standard LT1086/LT1586
APPLICATIONS
∙Powering VGA & Sound Card
∙Power PC™ Supplies
∙SMPS Post-Regulator
∙High Efficiency "Green" Computer Systems
∙High Efficiency Linear Power Supplies
∙Portable Instrumentation
∙Constant Current Regulators
∙Adjustable Power Supplies
∙Battery charger
PIN CONNECTIONS
PLASTIC TO-263 PACKAGE
CLM2815 |
3 |
|
|
|
VIN |
|
|
|
|||
2 |
|
|
|
VOUT |
|
|
|
|
|
||
|
1 |
|
|
|
V |
|
|
|
|
||
FRONT VIEW |
ADJ/GND |
||||
1E-29A |
PRODUCT DESCRIPTION
Calogic’s CLM2815 is a low power 1.5A adjustable and fixed voltage regulator. The device requires 2 external resistors to set the output for the adjustable version. The CLM2815 has been designed for low voltage applications that require lower dropout and faster transient responses. The device is well suited to power a low voltage microprocessor that requires a low dropout and a fast transient response to regulate from +2.85V to 3.8V. The device is adjustable to 1.2 volts.
The product family offers full protection against over-current faults, reversed input polarity, reversed load insertion, and positive and negative transient voltage. On-chip trimming adjusts the reference voltage to 1% while delivering 1.5A output current.
Encapsulated in a 3-pin TO-220, TO-263 & TO-252 packages.
ORDERING INFORMATION
Part |
Package |
Temperature Range |
CLM2815AU |
TO-220 |
-45 to +125oC |
CLM2815AAU |
TO-220 |
-45 to +125oC |
CLM2815AU-X |
TO-220 |
-45 to +125oC |
CLM2815AAU-X |
TO-220 |
-45 to +125oC |
CLM2815AT |
TO-263 (DD) |
-45 to +125oC |
CLM2815AAT |
TO-263 (DD) |
-45 to +125oC |
CLM2815AT-X |
TO-263 (DD) |
-45 to +125oC |
CLM2815AAT-X |
TO-263 (DD) |
-45 to +125oC |
PLASTIC TO-220 PACKAGE
|
|
CLM2815 |
|
|
|
|
VIN |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
VOUT |
|
|
|
|
|
|
|
VADJ/GND |
|
|
FRONT VIEW |
1E-30A |
CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025
CLM2815
CORPORATION
ABSOLUTE MAXIMUM RATINGS
Lead Temp. (Soldering, 10 Seconds) . . . . . . . . . . . . . . 300oC Storage Temperature Range . . . . . . . . . . . . -65oC to +150oC Operating Junction Temperature Range
CLM2815 Control Section . . . . . . . . . . . . . . -45oC +125oC CLM2815 Power Transistor . . . . . . . . . . . . . . -45oC +150oC
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10V Input to Output Voltage Differential . . . . . . . . . . . . . . . . . . 10V Maximum Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . 2A
ELECTRICAL CHARACTERISTICS (Note 1) at IOUT = 10mA, TA = 25oC, unless otherwise specified.
PARAMETER |
TYP |
CLM2815A |
CLM2815 |
UNITS |
|
CONDITIONS |
|
|||
|
|
|
|
|
|
|||||
MIN |
MAX |
MIN |
MAX |
|
|
|||||
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
1.5V VERSION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Voltage (Note 2) |
1.5 |
1.485 |
1.515 |
1.470 |
1.530 |
V |
CLM2815-1.5V, 0 ≤ IOUT ≤ 1.5A, 2.75V ≤ VIN |
≤ 7V |
||
1.5 |
1.470 |
1.530 |
1.455 |
1.545 |
||||||
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
2.5V VERSION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Voltage (Note 2) |
2.5 |
2.475 |
2.525 |
2.450 |
2.550 |
V |
CLM2815-2.5V, 0 ≤ IOUT ≤ 1.5A, 3.5V ≤ VIN |
≤ 7V |
||
2.5 |
2.450 |
2.550 |
2.425 |
2.575 |
||||||
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
3.3V VERSION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Voltage (Note 2) |
3.3 |
3.270 |
3.330 |
3.230 |
3.370 |
V |
CLM2815-3.3V, 0 ≤ IOUT ≤ 1.5A, 4.75V ≤ VIN |
≤ 7V |
||
3.3 |
3.240 |
3.360 |
3.201 |
3.399 |
||||||
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
5.0V VERSION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Voltage (Note 2) |
5.0 |
4.95 |
5.05 |
4.900 |
5.100 |
V |
CLM2815-5.0V, 0 ≤ IOUT ≤ 1.5A, 5.5V ≤ VIN |
≤ 7V |
||
5.0 |
4.90 |
5.10 |
4.850 |
5.150 |
||||||
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
ALL VOLTAGE OPTIONS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Reference Voltage |
1.250 |
1.225 |
1.270 |
1.225 |
1.270 |
V |
VIN ≤ 7V, P ≤ PMAX |
|
||
(VREF) |
1.5V ≤ (VIN - VOUT) ≤ 5.75V, 10mA ≤ IOUT ≤ IOUT ≤ 5.75 |
|||||||||
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
||
Min. Load Current (Note 3) |
5 |
|
10 |
|
10 |
mA |
1.5V ≤ (VIN - VOUT) ≤ 5.75V |
|
||
|
|
|
|
|
|
|
|
|||
Line Regulation |
0.005 |
|
0.2 |
|
0.2 |
% |
2.75V ≤ VIN ≤ 7V, IOUT = 10mA, TJ = 125oC (Note 3) |
|||
( VREF (IIN)) |
0.005 |
|
0.2 |
|
0.2 |
VIN ≤ 7V, IOUT = 0mA, TJ = 125oC (Note 2) |
|
|||
|
|
|
|
|||||||
Load Regulation |
0.05 |
|
0.3 |
|
0.3 |
% |
10mA ≤ IOUT ≤ 1.5A, (VIN - VOUT) = 3V, TJ = 25oC |
|||
( VREF (IOUT)) |
0.05 |
|
0.3 |
|
0.3 |
0 ≤ IOUT ≤ 1.5A, VIN = 7V, TJ = 125oC (Note 2) |
||||
|
|
|
||||||||
Dropout Voltage |
1.1 |
|
1.2 |
|
1.2 |
V |
VREF = 1%, IOUT = 1.5A (Note 3), IOUT ≤ 1.5A (Note 2) |
|||
|
|
|
|
|
|
|
|
|
|
|
Current Limit |
2.5 |
1.7 |
|
1.7 |
|
A |
VIN = 7V ≤ 1.5A |
|
|
|
(IOUT(MAX)) |
|
|
1.4V ≤ (VIN - VOUT) (Note 3) |
|
||||||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
||
Long Term Stability |
0.3 |
|
1 |
|
1 |
% |
TA = 125oC, 1000 Hrs. |
|
||
|
(Note 2) |
|
|
|
|
|
|
|
|
|
Thermal Regulation |
0.01 |
|
0.020 |
|
0.020 |
%/W |
TA = 25oC, 20ms pulse |
|
||
( VOUT (PWR)) |
|
|
|
|
|
|
|
|
|
|
Temperature Stability |
0.25 |
|
|
|
|
% |
|
|
|
|
( VOUT (T)) |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
Output Noise, RMS |
0.003 |
|
|
|
|
%VO |
10Hz to 10kHz, TA = 25oC |
|
||
|
3.0 |
|
3.0 |
|
3.0 |
|
TO-220 |
Junction to Tab |
|
|
Thermal Resistance |
60 |
|
60 |
|
60 |
oC/W |
DD Package |
Junction to Ambient |
|
|
|
3.0 |
|
3.0 |
|
3.0 |
|
Junction to Tab |
|
||
|
60 |
|
60 |
|
60 |
|
|
Junction to Ambient |
|
|
|
|
|
|
|
|
|
|
|
|
The Bold specifications apply to the over full operating temperature range.
Note 1: Changes in output voltage due to heating effects are covered under the specification for thermal regulation. Note 2: Fixed version only.
Note 3: Adustable version only.
CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025