Califone HPK User Manual

6. TROUBLESHOOTING

No Sound /
Low Volume

• Ensure cords are connected securely to the headphone/
headset and the audio source/computer.

• Ensure the audio source is not muted and volume is up.

• For the headphones/headsets with a recharging jack, ensure
the battery is fully charged.

7. SPECIFICATIONS & FEATURES

Standard Kits • HPK-1000: Includes HPE-1000 & HPC-1000

Features • 40mm Neodymium transducers

Plug Types

Frequency Response 20 Hz - 20 kHz

THD % < 2 % (80Hz - 20kHz)

Headphone Input Impedance 50 ohms

Limiter Level: 85 +/- 3 dB (No weighting) **

Microphone (HPC-1010 & HPC-

1030)

Battery Usage Time (HPE-1020 &
HPE-1030 only)

Battery Recharge Time (HPE-1020 &
HPE-1030 only)

Product Construction Earcups: ABS plastic

• HPK-1010: Includes HPE-1010 & HPC-1010

• HPK-1020: Includes HPE-1020 & HPC-1020

• HPK-1030: Includes HPE-1030 & HPC-1030

• HPK:1040: Includes HPE-1000 & HPC-1020

• HPK-1050: Includes HPE-1010 & HPC-1030

• Adjustable Headband

• Adjustable uni-directional microphone (HPE­1010 & HPE-1030)

• Excellent Isolation / Ambient Noise
Reduction

• In-line volume control

• Straight, replaceable cords.

• “Dishwasher Safe” (HPE-1000 & HPE-1010
only)

HPC-1000 & HPC-1010: USB plug
HPC-1020: Stereo 3.5mm plug with 6.5mm adapter
HPC-1030: Stereo 3.5mm plug + 3.5mm plug for mic

Speed: < 20 ms
** Depends on signal and ear/head-coupling.

Uni-directional electret (requires bias voltage
between 2 to 10 V)

> 8 hours (depends on usage)

< 2 hours

Earpads: PVC
Cords: Polyurethane

Product Dimensions

Product Weight (incl. accessories)

Headphones: 8.25” x 6.3” x 3”
HPC-1000 & HPC-1010: 7.5’ total cord length
HPC-1020 & HPC-1030: 6.25’ total cord length

HPC-series < 3 oz
HPE-series: < 10 oz

8. WARRANTY

Califone warrants this product to be free from defective material
and workmanship for one year from the purchase date. Our “Project
Intercept” Customer Satisfaction program will replace defective parts and
repair malfunctioning equipment under this warranty when the defect
occurs under normal use.

All Damage Claims Must Be Made With the Freight Carrier

Notify the freight carrier immediately if you observe any damage to the
shipping carton or product. Repack the unit in the carton and await
inspection by the carrier’s claim agent. Notify your dealer of the pending
freight claim.

Returning Your Unit for Service or Repairs

Should your unit require service, contact our Customer Service
Department online at califone.com/techsupport or via email
[e-mail] or by phone at 800-722-0500 / 818-407-2400
to rst obtain an RA (Return Authorization) number before returning
it to Califone. The unit must be returned to our factory via prepaid
transportation only after the factory issues an RA number, which must be
clearly written on the outside of the box.

Califone® International, Inc.

1145 Arroyo Avenue, #A

Toll Free 800.722.0500 | Toll Free Fax [phone]

International Customers call 818.407.2400 or Fax [phone]

San Fernando, CA 91340 USA

califone.com

Model HPK-series

Headphones/Headsets

User Manual

califone.com

Califone HPK-series Rev 01 0710

Model HPK-series Headphones/
Headsets

Thank you for purchasing the Califone® HPK-series Headphones/
Headsets.

We encourage you to visit our website www.califone.com to register
your product for its warranty coverage, sign up to receive our newsletter,
download our catalog, and learn more about the complete line of
Califone® audio visual products, including portable and installed wireless
PA systems, multimedia players and recorders, headphones and
headsets, computer peripheral equipment, visual presentation products
and language learning materials.

1. IMPORTANT SAFETY INSTRUCTIONS

Before using this product, read the instruction manual for important safety
information. Please retain this manual for future reference and warranty
information.

Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing
to qualied service personnel. Do not attempt to modify the device in any
way. Doing so could invalidate your warranty.

Moisture and heat sources

The HPE-1000 and HPE-1010 headphones/headsets are washable. All
other headphones/headsets are not. Follow the Maintenance & Cleaning
instructions in Section 5 of this manual carefully. At all other times, do
not use this apparatus near water (for example, sinks, baths, pools) or
expose it to rain, moisture, dripping or splashing liquids. Unless otherwise
specied, do not expose the unit to high temperatures, high humidity or
direct sunlight.

Location

Place the device in stable location, so it will not fall causing damage to
the device or bodily harm.

Intended use

The product may only be used with the original parts intended for it.
The product may only be used in closed and dry rooms. The intended
use includes adherence to the specied installation instructions. The
manufacturer accepts no liability for damage arising due to improper use.

2. PACKAGE CONTENTS

• HPE-series Headphone

• HPC-series Detachable Cord

• User Manual

• HPC-1020 also includes 3.5mm to 6.5mm adapter

3. PART NAMES AND FUNCTIONS

HPE-1020 & HPE-1030

Headphone - Left Earcup

Rear View

1

2

3

6

3

2

5

O
N

LIMITER

OFF

HPE-1020 & HPE-1030 Headphone

- Right Earcup Bottom View

DANGER:CONNECT
WS-CH SERIES
CHARGER ONLY

1. Volume Control

2. Power LED

3. Limiter ON/OFF Switch & LED

6

4. Mute Button

5. Mic Off Button & LED

6. Recharging Connector for
WS-CH Charger

4. SETUP AND INSTALLATION

1. If not already assembled, carefully plug the HPC-series cord into
the bottom of the HPE-series headphone/headset left earcup.

2. Use the WS-CH charger to recharge up to 4 sets of headphones
with internal batteries (HPE-1020 and HPE-1030). The WS-CH
will indicate when charging is complete. Refer to the WS-series
User Manual for details.

NOTICE: Do not connect any other type of power supply to the
headphones. Doing so may result in damage to the headphones.

califone.com

5. BASIC OPERATION

CAUTION: Avoid listening to the headphones at loud volume
settings for long periods of time as this can result in hearing damage.
Using the 85dB Limiter function may help reduce the risk of hearing
damage, but is in no way a guarantee.

HPC-1000 & HPC-1010 Operation

1. Adjust the headphone volume to minimum.

2. Connect the USB plug to the computer. The computer should
automatically detect and install the device. Wait until installation
is complete. If using Windows 98, an additional driver may be
required to install the device. Visit www.califone.com to download
the driver. The Power LED should light green.

3. On the computer, use the Audio Settings Control Panel/
Preferences to select the device to output audio.

4. Begin playing audio on the computer.

5. To help reduce peaks in the audio and reduce the risk of hearing

3

damage due to loud sounds in the headphones, enable the 85dB
Limiter by moving the Limiter switch to the ON position. The
Limiter LED should light green.

6. Increase the volume to the desired level.

7. The HPC-1010 also includes a Mic Off (to mute the microphone)
and MUTE button (to mute the audio output to the headphones).
Momentarily press the buttons to enable/disable these functions.

HPE-1020 & HPE-1030 Operation

1. The HPE-1020 and HPE-1030 Headphones include an internal
85 dB Limiter that can be switched on or off.

NOTE: The HPE-1020 and HPE-1030 will operate without a charged
battery, however, the limiter will not function.

Maintenance & Cleaning

NOTICE: Only the HPE-1000 and HPE-1010 Headphones are
washable. Other headphones/headsets and cords cannot be washed.

Washable Models:

1. Before washing, remove the cord and foam from the microphone.

2. To remove/replace the cord, push a small screwdriver or paper
clip into the hole where the cord connects to the earcup and pull
down on the cord.

3. Wash by hand with soap and water.

CAUTION: Allow headphones to dry thoroughly before use.

Non-Washable Models:

1. When cleaning the device, please use a soft, dry cloth. (Never
use benzene, paint-thinner, or other chemicals on the device.)

califone.com