Cables to Go TruLink 39962, TruLink 39963 User Manual

Page 1
TruLink™
2/4-Port Audio Video Splitter / Extender
User Manual
Page 2
1
Introduction
The TruLink™ Video Switcher/Extender will display two or four computer’s video outputs to one monitor or projector. Daisy-chain more than one switcher to expand the number of computers you can connect. With the built-in video signal enhancement, you can place the monitor up to 210 feet away while maintaining your video quality. No software is required and PC selection is easy. Switch between computers via push buttons or use the infrared remote control for PC selection from up to 6 feet away. From use in test bench facilities, data centers and help desks, classrooms, and multi-media centers, the TruLink Video Switcher/Extender delivers both performance and value.
Features:
Display video output from two or four computers on a single
monitor or projector
PC selection via push buttons or IR remote control
IR remote control allows you to switch outputs from up to 6
feet away
Page 3
2
Daisy-chain switches to expand the number of computers
connected
Built-in video signal enhancement allows monitor to be
placed up to 210 feet away
Supports video resolutions up to 2048x1536
Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multisync
monitors
Maximum bandwidth of 450MHz
Input connectors: 2 or 4x HD15 Male
Output connectors: 1x HD15 Female
Package Contents:
z TruLink™ 2 or 4-Port UXGA Monitor Switcher/Extender
z Infrared Remote Control
z 5V/1A DC Power Adapter
z User Manual
Page 4
Application
2-port Video Selecto r- #39962
4-port video Selector- #39963
3
Page 5
Connecting the Device
1. Use an HD15 male to male cable to connect your monitor or projector to the HD15 female port with the picture of a mo nitor under it.
2. Use HD15 male to female cables to connect your computers to the HD15 male ports labeled 1-2 or 1-4.
3. Connect the power adapter to the port labeled DC 5V and connect the adapter to a power outlet.
4. Use the push buttons on the front of the device or the IR remote control to switch the video signal sent to your monitor or projector.
5. The LED above the push button on the front of the device will light green to indicate which computer is selected.
6. Turn the on/off the device and your monitor by switching on/off the red toggle switch on the front of the device.
1501 Webster S treet
4
Dayton, Ohio 45404
Page 6
5
www.cablestogo.com
Product Specification
Function
2-Port
(Part #39962)
4-Port
(Part #39963)
Type Video Selector
Cable Distance
(Selector to Monitor)
65 meters (max.)
Signal Type VGA, SVGA, XGA, Multi sync
PC selection By push button and Infrared remote control
Video Output Connectors 1 x HDB-15 Female
Operating Tem peratur e 0-40 degrees (Celsius)
Storage Temperature -20~60 degrees (Celsius)
Humidity 0-80% RH, Non-condensing
Housing Metal
DC Power Adapter 5V
Max. Resolution 2048x1536
Bandwidth(-3db) 450MHz
Video Input Connectors 2x HDB-15 Male 4x HDB-15 Male
Page 7
6
Loading...