Cabasse PACIFIC 3 SA INSTALLATION GUIDE

PACIFIC 3 SA, new high-end LF-powered speaker



New from the Artis range, Pacific 3 SA is the first tower loudspeaker
fitted with the 17cm coaxial unit, the BC17.

This unit consists of a dome midrange-tweeter and ring shaped low
midrange-woofer membrane, forming together a portion of pulsating
sphere. With constant control of the directivity all along its 175­20,000 Hz bandwidth, it provides Pacific 3 SA with all the benefits of
the SCS (Spatially Coherent System) principles developed by the
Cabasse laboratory.

The twin honeycomb dome woofers are powered with a 450 W
Cabasse built-in amplifier; providing, in a slim cabinet, powerful and
controlled LF response down to 37 Hz and deeper. The required
cabinet depth has been reduced by 20% through the use of an
innovative technical solution, which enables fine tuning of the LF for
easy positioning and amplifier matching.

Technical Data

Type: Floorstander with active bass
Ways: 3
Drivers: 1 x coaxial BC17
2 x 21ND34 21 cm woofers
Sensitivity 1W/1m: 91.5 dB
Cross-over points: 175 Hz - 1,830 Hz
Frequency response: 38 - 20 000 Hz
Nominal impedance: 8 ȍ
Minimum impedance: 4 ȍ
Power handling: 150 W
Peak power: 1000 W
Standard finish: Glossy Black – Glossy Pearl
Dimensions: 129 x 29 x 49 cm – 50.8 x 11.4 x 19.3 in.
Weight: 42 kg – 92 lbs

Cabasse SA – 210 rue René Descartes – BP10 – 29280 Plouzané – Tél [phone] - Fax [phone]

www.cabasse.com

Photos : GPO Morlaix - Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the models

presented in specification sheets, advertising materials and manuals without prior notice.