Bushnell Trophy Cam HD Quick Start Guide

Quick Start Guide

1. Go to www.wirelesstrophycam.com and click “SETUP A
NEW ACCOUNT”.

2. Fill in your personal info and set your notication
preferences. Click “CREATE”.

3. Click the plus sign (+), name your camera and enter its
serial number (printed inside the camera-take a photo of the
SN with your cell phone for later reference). Click “ADD IT”.

4. Open the camera’s latches and install 12 AA batteries
(lithium or alkaline). Insert a new SD card (up to 32 GB).

5. Move camera’s power switch to the SETUP position, then
press the MENU button.

6. Select your preferred method of receiving images (Cell
phone number or Email address). Press OK on the
camera’s control panel.

7. Enter your cell phone number or email address (lower case
letters are not necessary or provided in email settings).

8. Press MENU. The camera will save your email address or cell
number, then countdown and take a test photo. Note: the

LCD display will power o while the camera is transmitting
the image. If the camera is unable to connect to a valid cell

phone # or email, the display will indicate “test photo send
fail”.

9. The camera displays the signal strength for the last
connection. Check your cell phone or email to verify the
test image was received.

10. After you have veried the camera is transmitting images,
move the switch to ON to initiate “live” triggering, and leave
the area.

11. You can now log in to your account at wirelesstrophycam.
com to view new images, change settings, and monitor the
status of one or more wireless cameras. You can also control
your camera(s) remotely via the Bushnell Wireless Trophy
Cam app, a free download for iPhone® and Android™.

iPhone® is a registered trademark of Apple Inc.
Android™is a trademark of Google Inc.

WIRELESS

1 2

3

4

5

6

7

8