Bushnell Transferring Maps Tutorial Owner's Manual

Transferring maps from PC Companion

Open the PC Companion application

Once the GPS PC Companion application opens we will need to plug in your GPS to the
computer.

After you have plugged in the GPS you will see in the top right corner the GPS information will
appear.

In the lower left corner you will see the My GPS Archives: this is where you maps have been
saved.

We will now need to take the maps that you would like to transfer to the GPS and place them in
My Project.

Click and drag the map from the Archives and place it in the corresponding folder in the Project.

Once your map is in the correct folder it will appear on the US map in the correct location.

To view this map you can zoom into it by using the Zoom Buttons

As you zoom into your location the map that you downloaded will become visible.

If you have all the files in the project that you would like to transfer to the GPS we will now
need to hit the Transfer button.