Bushnell NatureView User guide [ml]

SPOTTING SCOPE INSTRUCTION MANUAL
10-12
CONTENTS
English
Français
Español
Deutsch
Italiano
5–10
11–16
17–22
23–28
29–34
THE MOST RARE AND REMARKABLE SPECIES ARE ALSO THOSE MOST SPECIFICALLY ADAPTED TO THEIR ENVIRONMENT.
Conversely, to see them all, you and your optics have to be remarkably versatile. Our NatureView spotting scopes thrive in virtually any setting, offering bright, crisp views of your quarry near and far. Fully multi-coated optics and premium lead free glass help you catalog every detail. A compact tripod with integrated car window mount and both soft and hard carrying cases are included. They’re a natural selection for wherever your next field trip takes you.
®
Enviro-Friendly. All NatureView spotting scopes feature lead free glass.
High Quality Optics. BaK-4 prisms and fully multi-coated optics work together to deliver ultra-bright, razor-sharp images.
Durable. Rugged, non-slip rubber armor absorbs shock. NatureView spotting scopes are waterproof and nitrogen purged (fogproof) for clear, reliable viewing in all weather conditions.
English
5
Eyecup
(“down” position)
Zoom Ring
Focus Knob
PARTS GUIDE
Sliding Sun Shade
Tripod Mounting
Collar Knob
Eyecup Extended (“up” position)
Thank you for purchasing your new Bushnell NatureView® Spotting Scope. This manual will help you optimize your viewing experience by explaining how to utilize the scope’s controls and features, and how to care for it. Read the instructions carefully before using your scope or the included mini tripod/car window mount.
6
Tripod Mounting Base
Lens Cap
TRIPOD MOUNTING
After setting up your tripod on a stable, level surface, fasten the scope’s mounting base to the screw on the tripod’s platform, so that the scope is held securely in place (see “Using the Mini Tripod” on the next page if you are using the included tripod). The scope has a rotating tripod mounting collar. Loosen the tripod collar knob, then twist the scope to the desired position (for example, you may prefer to position the focus knob o to one side instead of on top), then tighten the knob back clockwise to secure the scope in place.
USING the ZOOM EYEPIECE and FOCUSING
Remove the tethered objective lens cap before viewing by pulling the tab at the top of the cap out and letting the cap hang down. While looking through the scope, rotate the zoom ring on the eyepiece to adjust magnifying power from low to high. Lower power settings will provide a brighter image with a wider eld of view; higher powers allow observing smaller details on more distant subjects. To reduce the need to readjust focus when zooming, set the zoom to its highest power (45x or 60x depending on your model) and focus on your subject. When you zoom back down a lower power, it will stay in focus. If you don’t wear eyeglasses, twist the eyecup at the end of the eyepiece counter-clockwise until the eyecup is in a position which allows you to view the full image. To retract the eyecup back down, twist it in a clockwise direction. Note: the NatureView
scope’s zoom eyepiece is not interchangeable. Do not attempt to remove it from the scope.
WATERPROOF / FOGPROOF
Your Bushnell NatureView spotting scope has been designed and built utilizing the latest waterproof and fogproof technology. The scope is O-ring sealed for complete moisture protection. Fogproof protection is
achieved from dry nitrogen purging that removes all internal air which can retain moisture.
7
USING the MINI TRIPOD
• Unfold the legs fully and set the tripod on a stable, level surface such as a table or the ground.
• Attach the scope by lining up the screw at the top of the tripod with the 1/4”-20 socket on the bottom of the scope’s tripod mounting base, then turning the mounting knob on the tripod until the scope is securely attached to the tripod (do not overtighten).
• To tilt or rotate (pan) the spotting scope, twist the pan handle counter-clockwise, move the scope to the desired position, then tighten the pan handle (clockwise) to hold it in place.
• To adjust the tripod height, loosen the height lock collar, move the center column up or down, then tighten the lock collar.
• To remove the car window mount section of the tripod for separate use, loosen the large clamp bolt fully and pull the top section o of the plate at the top of the center column.
• When using the car window mount, roll your window down part way and place the padded clamp of the mount onto it, then carefully tighten the clamp bolt (do not overtighten!). Finally, attach the scope to the mounting screw.
8
Mounting Knob
Pan/Tilt Handle
Height Lock Collar
Car Window Mount
Mounting Screw
Car Window Mount Clamp Bolt
Plate (not visible)
Center Column
Legs
Sun Shade Extended
USING the SLIDING SUN SHADE
If you experience glare or lens are due to the angle and direction of the sun relative to the front lens, pull the sun shade forwards to extend it. Push straight back on the sun shade to collapse it for storage.
CLEANING
The lenses of your NatureView spotting scope are fully multi-coated for highest light transmission. As with any multi-coated optics, special care must be taken in cleaning the lenses. Follow these steps for proper lens cleaning:
• Blow away any dust or debris on the lens (or use a soft lens brush).
• To remove dirt or nger prints, clean with the supplied micro-ber cloth rubbing in a circular motion. Use
of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. A washable microber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microber cloth.
• For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning uid or isopropyl alcohol may be used. Always apply the uid to the cleaning cloth – never directly on the lens.
GENERAL CARE and CAUTIONS
Never disassemble your spotting scope. Irreparable damage can result from unauthorized service attempts, which also void the warranty.
NEVER LOOK DIRECTLY AT THE SUN WITH YOUR SCOPE
AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES
9
WARRANTY/REPAIR
We are so proud of our Bushnell® NatureView™ Spotting Scopes that their materials and workmanship are warranted to be free of defects for the life of the product. The warranty is available to any owner of a NatureView spotting scope. No receipt or warranty card is required. This warranty does not cover damages caused by misuse or improper handling, installation or maintenance of the binoculars. At our option, we will repair or replace any defective NatureView spotting scope, which shall be your sole remedy under this warranty. In no event shall we be liable for transportation costs to us, costs of removal or reinstallation of the scope, or incidental or consequential damages. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Any return in the U.S. or Canada made under this warranty must be accompanied by the items listed below:
1) A check/money order in the amount of $10.00 to cover the cost of postage and handling
2) Name and address for product return
3) An explanation of the defect
4) Proof of Purchase
5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN U.S.A. Send To: IN CANADA Send To: Bushnell Outdoor Products Bushnell Outdoor Products Attn.: Repairs Attn.: Repairs 9200 Cody 25A East Pearce Street, Unit 1 Overland Park, Kansas 66214 Richmond Hill, Ontario L4B 2M9
For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you may also contact Bushnell at: Bushnell Germany GmbH European Service Centre Mathias-Brüggen-Str. 80 D-50827 Köln GERMANY Tel: +49 221 995568-0 Fax: +49 221 995568-20
This warranty gives you specic legal rights. You may have other rights which vary from country to country.
10
LIFETIME LIMITED WARRANTY
©2012 Bushnell Outdoor Products
Français
LES ESPÈCES LES PLUS RARES ET LES PLUS REMARQUABLES SONT AUSSI LES MIEUX
ADAPTÉES À LEUR ENVIRONNEMENT.
À l’inverse, pour observer toutes ces espèces, votre optique et vous-même devez faire preuve d’une incroyable polyvalence. Nos lunettes terrestres NatureView type de paysage, vous permettant de voir votre gibier de façon nette et lumineuse, qu’il soit près ou loin. Grâce aux optiques à revêtements multiples et au verre de première qualité, sans plomb, vous ne manquerez aucun détail. Un trépied compact avec monture intégrée pour vitre de véhicule, une mallette rigide et un étui souple sont fournis avec l’appareil. Elles s’imposent comme un choix naturel, quelle que soit la destination de votre prochaine expédition.
®
optimise pratiquement tout
Respectueuses de l’environnement. Les
lunettes terrestres NatureView contiennent toutes du verre sans plomb.
Optique de haute qualité.
Ensemble, les prismes Bak-4 et l’optique traitée multicouches garantissent des images d’une netteté et d’une luminosité extraordinaires.
Durable. Le revêtement robuste et antidérapant absorbe les chocs. Les lunettes terrestres NatureView sont étanches et purgées à l’azote (pour empêcher la formation de buée) afin de vous garantir des observations nettes et précises quelles que soient les conditions météos.
11
Loading...
+ 25 hidden pages