Bush VHS01A17Z Instruction manual

Page 1
VHS01A17Z
Page 2
vacuum cleaner
vacuum cleaner
If you sll require further assistance, call one of our experts on
BUSH Technical Helpline 0345 604 0105.
Page 3
Ready?Let's begin
Operate your vacuum cleaner
6
10
Charging
Cleaning
Replacing battery
Docking Station
Care and maintenance
Dust cleaning
Power Brush Cleaning
Toubleshooting
Help and assistance
Declaration of conformance to product
Standards
Disposal
14
14
15
16
20 22
24
25 26
27
0345 604 0105
3
Page 4
Page 5
Page 6
WARNINGS This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Regarding the detailed instructions for the method and frequency of cleaning and the precautions during user maintenance, refer to the section “Care and maitenance” on page 20 of the manual. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance. Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire calamity will be caused, which bring such accidents as human body injuries:
-Don't pick up large or sharp broken such as glasses.
6
Page 7
-Don't pick up harming or erodent liquids (solvent, corrosive, detergent…).
-Don't pick up inflammable or explosive substance such as gasoline or alcohol.
-Don't pick up/ vacuum burning or glowing objects (cigarettes, matches, hot ashes). Only the certified technician may disassemble this product. Users are strictly not allowed to disassemble this product. This product shall only be charged using power adapter (YLS0241A-U250080) provided with the appliance. Other power adapters may cause damages to this product. Do not touch power cord, plug or adapter with wet hands. Avoid curtains, any kind of strings or user's body part wrapping up on the wheel. Keep this product away from cigarette stubs, lighters or flame. To clean the product, this product must be fully charged before any cleaning process. Do not over-bend the power cord, or place heavy or sharp objects on this product. This product is intended for indoor use only, do not use this product outdoors. Do not place object (e.g. human) with more than 10KG weight on this product. Do not use this product in wet or moist environment (e.g. bathroom). Before using this product, please remove any fragile objects (e.g. glasses, lamps etc) from the floor.
0345 604 0105
7
Page 8
Also removes any objects that may be wrapped up to the side brushes or may block the suction inlet. Do not put this product on table or benches to avoid falling o. While delivering or if do not use the product for long time, please turn it o from the bottom. Before charging, please check whether the power adapter and socket is connected well. When this product is cleaning the room, please inform other members to avoid causing them to fall. When the dust bin is full of dust, empty the dust bin before using this product. This product is functioning at temperature range within 0°C ­40°C. Do not use this product in high-temperature environment. Please remove batteries form this product before disposal. Depleted batteries should be disposed safely. The appliance must be disconnected from the supply mains when removing the battery. If the appliance is to be stored unused for a long period, the batteries should be removed. The supply terminals are not to be short-circuited. The product shall only be charged using the included battery in gift box.
8
Page 9
vacuum cleaner
Page 10
Vacuum cleaner
vacuum cleaner
10
vacuum cleaner
Page 11
Components
Vacuum cleaner
1.Main body
2.Extension tube
3.Battery pack
4.Power brush
5.Crevice tool
6.Furniture brush
7.Wall holder
8.Power adapter
9.Battery
0345 604 0105
vacuum cleaner
11
Page 12
Model no
Rated Charging VoltageRated voltage Rated Power
VHS01A17Z
220-240V 21.6V 120W
12
vacuum cleaner
Page 13
Operate your vacuum cleaner
Page 14
Operate your vacuum cleaner
Charging
This product uses a piece of 18V lithium battery.The battery is not charged at the factory. Be sure to fully charge the battery before use.
1. Put the main body on a horizontal table.
2.Connect the power cord to the outlet and the charging port in the handle part of the main body to start charging, and the power indicator flashes blue.
3. Charging time: 2.5-3.5 hours; discharging time: 15-20 minutes..
1. Do not charge at temperatures below 5°C or above 40°C.
2. The indicator will flash if the battery power is low in the running process.
Cleaning
To prevent blockage of the air passage large objects like large paper and packing materials should be removed from the area before start cleaning.
1. Press and hold the “Start” button to start cleaning.
2. Release the “Start” button to stop cleaning.
3. Charge when the power indicator flashes.
1. Do not use the device when the plug is connected.
2. Wait 3 seconds before starting after disconnecting the power supply.
14
Operate your vacuum cleaner
Switch button
Power indicator
Page 15
Operate your vacuum cleaner
Replacing baery
Tip: If you need to replace the battery, please consult your dealer.
Battery is consumable. If the battery life becomes shorter and charging time becomes longer, please replace the battery.
1. Press the battery release button
2. Take out the battery Battery
Cauon
1. Cut o the power supply before removing the battery.
2. Do not use and store batteries at temperatures below 5°C or above 40°C.
3. When disposing of this product, remove the battery from the device.
4. Do not modify the device, accessories or replace the power cord or battery.
5.Battery model : MB2420A 61NR19/66.
Battery recycling: Waste batteries are important resources. When disposing of the product, do
not dispose of the battery at will.
Please treat properly in accordance with government regulations to facilitate the recovery to
the corresponding waste battery recycling facilities.
0345 604 0105
Operate your vacuum cleaner
15
Page 16
Operate your vacuum cleaner
Docking Staon
1. Installation diagram 2. Fixing on the wall 3. Hanging the product & accessory
Screw holes
66mm
90mm
4*30mm Screw
6*30mm Expansion pin
Tips: When installing the docking station, 4*30 mm screw is suggested on the wooden surface. The 6*30 mm expansion pin and 4*30 mm screw should be used on the cement surface.
Floor Floor
16
Operate your vacuum cleaner
Page 17
Operate your vacuum cleaner
Cauon
Before installaon:
1. Do not install on weak structures such as plaster walls and compressed wood boards when their thickness is less than 10 mm.
2. To prevent fire or electric shock due to leakage, please do not install it on metal walls.
3. Hanging area must be flat.
4. Wall holder must be placed in ambient temperature between 5 and 40.
5. Ensure screw will not damage gas pipe, water pipe or wire insides of the wall.
6. No part of the appliance should touch the ground when. placed on the docking station.
Before use: Disconnect the appliance from the power supply before removing it from
the docking station.
When store the appliance:
1. Please do not apply undue force to the docking station.
2. Do not leave it lean against the wall, always store on the docking station.
3. Must be connected with extension tube and brush. Ensure not working while stored.
4. The crevice nozzle must be removed from the extension hose prior to storage.
5. Ensure that brush and extension tube area is clear : can not be accidentally hit by feet or other falling object.
6. Ensure that the wall holder is firmly secured to the wall. Check regularly and tighten the screws if necessary.
0345 604 0105
Operate your vacuum cleaner
17
Page 18
Page 19
Page 20
Care and maintenance
Dust cleaning
To maintain the suction power of the vacuum cleaner, please clean the dust regularly.
1. Press the button, open the dust cup and dump the dust.
Dust full
Push
2. Turn left to remove the dust cup, and clean the dust attached to the dust cup and the bottom cover.
Turn left
3. Turn left, and remove and clean the filter.
20
Care and maintenance
Take out
Page 21
Care and maintenance
4. Turn right, remove the top cover, take out HEPA vertically, and wash with water.
Turn right
5. When the parts are fully dry, install according to the steps.
Tip: It is advisable to carry out the above cleaning after dumping dust.
Cauon
1. Please pay attention to sharp objects such as glass to prevent injury.
2. The parts must be completely dry before installing.
3. Do not scrub the filter cotton or apply brute force to it.
4. Please make sure that the filter cotton has been installed before assembly.
5. Do not continue to use when the filter cotton in the dust cup is damaged or if the cleaning and maintenance are not sucient.
0345 604 0105
Care and maintenance
21
Page 22
Care and maintenance
Power Brush Cleaning
Please clean the brush when the brushroll or the wheel is entangled by hair
1. Disassemble the power brush.
Push
2. Unlock the brushroll lock - Disassemble the brushroll for cleaning and reassemble after all parts are completely dried.
Tips : The brushroll and its cover are washable. Ensure they are completely dried before use.
Cauon
1. When the dust blocks the air flow of the floor brush, please clean it with a stick.
2. Except for the brushroll and its cover, all others cannot be washed with water.
3. Do not apply oil to both ends of the brushroll.
4. Do not touch the working brushroll part and stay away from the air outlet when in operation.
5. Do not use when wheels or scrubber's nylon loop are damaged.
22
Care and maintenance
Page 23
Page 24
TROUBLESHOOTING
In case of malfunction, please refer to the following table.
Problem Possible reason Soluon
Three battery power indicators flash white
Electric brush doesn’t work
Running time becomes shorter
Suction power becomes weak
Can’t charge
Battery leaks
- Power brush is intertwined Ambient temperature is too high or too low
- Large garbage (e.g. packaging film) is winded
- Brush is intertwined by hair
- Battery is aged
- Ambient temperature is too high or too low
- The battery isn’t fully charged
- Too much dust in the cup
- Cotton filter is blocked
- Brush or accessory suction port is blocked
- Hasn’t been fully dried after washing
- Ambient temperature is too high or too low
- The battery is not used for a long time
- Clean the power brush
- Use in approprioate environment
- Clear the hair intertwined on the brush
- Clear the garbage
- Contact your dealer or after-sales personnl to purchase battery
- Use in approprioate environment
- Please charge the battery
- Clean in time
- Wash the cotton filter
- Clear the blockage
- Dry the parts in cool place after washing
- Charge in approprioate environment (5~40°C)
- Replacement battery
.
24
Page 25
Help and assistance
wash vacuum cleaner
0345 60 4 0105
0345 604 0105
25
Page 26
2014/35/EU low voltage directive 2014/30/EU the EMC directive 2011/65/EU the ROHS directive
This is a class ll appliance.
26
Page 27
0345 604 0105
27
Page 28
0345 604 0105
Loading...